Vinsetto Computer Gaming Chair Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the assembly, operation, and maintenance of your Vinsetto Computer Gaming Chair (Model 921-618V00BK). Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Informazzjoni dwar is-Sigurtà

• Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ.
• Segwi l-istruzzjonijiet tal-assemblaġġ bir-reqqa. Tissikkax iżżejjed il-viti.
• Toqgħodx fuq is-siġġu.
• Tużax is-siġġu jekk xi partijiet ikunu nieqsa jew bil-ħsara.
• Żomm it-tfal 'il bogħod mill-partijiet li jiċċaqalqu waqt l-aġġustament.
• Maximum load capacity: 264 lbs (120 kg). Do not exceed this weight.

Kontenut tal-Pakkett

Qabel ma tibda l-assemblaġġ, ivverifika li l-komponenti kollha li ġejjin huma inklużi fil-pakkett tiegħek:

• Serħ id-dahar
• Kuxxin tas-Sedil
• Armrests (2)
• Ċilindru tal-Lift tal-Gass
• Qoxra tal-Lift tal-Gass
• Bażi tal-Istilla
• Xandara (5)
• Pjanċa tal-Mekkaniżmu
• Assemblaġġ tas-serħan tas-saqajn
• Kap Pillow
• Pillow Lumbari
• Pakkett tal-Ħardwer (viti, woxers, ċavetta Allen)

Setup u Assemblea

Assembly of the Vinsetto Computer Gaming Chair is required. Please follow the steps below for proper setup.

Pass 1: Waħħal ir-Roti mal-Bażi

Daħħal kull waħda mill-ħames roti fit-toqob fit-tarf ta’ kull sieq tal-bażi tal-istilla. Imbotta sew sakemm tikklikkja f’postha.

Step 2: Install Gas Lift

Place the gas lift cylinder into the center hole of the star base. Cover the gas lift with the telescopic plastic cover.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the screw holes on the underside of the seat cushion. Secure it using the provided screws. Ensure the front of the mechanism plate faces the front of the seat.

Pass 4: Waħħal Armrests

Attach the armrests to the sides of the seat cushion using the designated screws. Ensure they are securely fastened.

Step 5: Connect Seat to Gas Lift

Carefully place the assembled seat onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism plate.

Step 6: Attach Backrest

Align the backrest with the mounting brackets on the seat. Secure it with the remaining screws.

Pass 7: Installa s-Serħan tas-Saqajn

Slide the footrest assembly into the designated slots under the seat. Ensure it moves smoothly.

Step 8: Attach Pillows

Attach the head pillow and lumbar pillow using their elastic straps, positioning them for optimal comfort.

Image: Detailed dimensions of the Vinsetto gaming chair, showing overall height, width, and depth, as well as seat dimensions and armrest height.

Immaġni: Close-up view highlighting the chair's construction, including PU leather, thick padding, the high-end gas lift mechanism, and the sturdy five-star base with casters.

Istruzzjonijiet Operattivi

Your Vinsetto gaming chair offers several adjustable features for personalized comfort.

Aġġustament tal-Għoli tas-Sedil

To adjust the seat height, locate the lever on the right side under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height.

Image: Diagram illustrating the adjustable seat height mechanism, controlled by a lever, and the adjustable head and lumbar pillows.

Backrest Reclining Function

To recline the backrest, pull the lever on the left side of the chair upwards. Lean back to your desired angle (up to 135 degrees) and release the lever to lock it in place. To return to an upright position, pull the lever and lean forward.

Image: Visual representation of the chair's reclining capability up to 135 degrees, suitable for working, watching, or relaxing, with the footrest extended.

Operazzjoni tas-Serħan tas-Saqajn

The integrated footrest can be extended or retracted as needed. Pull the footrest handle to slide it out from under the seat. To retract, push it back in until it is fully stored.

Immaġni: Close-up view of the chair's seat and the footrest in its extended position, providing support for the legs.

Lumbar and Head Pillow Adjustment

Both the head pillow and lumbar pillow are adjustable. They are attached with elastic straps that can be moved up or down along the backrest to provide support where you need it most.

Immaġni: Wara view of the chair's upper section, showing the straps for adjusting the head and lumbar pillows.

Swivel 360-Grad

The chair is equipped with a 360-degree swivel function, allowing for easy rotation without moving the base.

Image: Diagram illustrating the chair's 360-degree swivel capability, indicating flexibility and convenience for multi-tasking.

Vidjo tal-Karatteristiċi tal-Prodott

Manutenzjoni

Proper care will extend the life and appearance of your Vinsetto Computer Gaming Chair.

• Tindif: Imsaħ nadif bl adamp drapp. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu li jistgħu jagħmlu ħsara lill-ġilda artifiċjali.
• Spezzjoni: Iċċekkja l-viti u l-boltijiet kollha perjodikament biex tiżgura li huma ssikkati. Erġa' ssikkahom jekk meħtieġ.
• Xandara: Żomm ir-roti ħielsa minn xagħar u debris biex tiżgura li jirrumblaw bla xkiel.

Issolvi l-problemi

Jekk tiltaqa' ma' xi problemi bis-siġġu tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

Garanzija u Appoġġ

Your Vinsetto Computer Gaming Chair is covered by a Garanzija ta '90 jum against manufacturer defects from the date of purchase.

For warranty claims, technical support, or any inquiries regarding your product, please contact the manufacturer:

Manifattur: Aosom Kanada
Informazzjoni ta' Kuntatt: Markham, Ontario, CA Tel. 1-416-792-6088

Please have your model number (921-618V00BK) and proof of purchase ready when contacting support.