GONEO Type 2 Schuko 16A 3.68kW Single-Phase Portable EV Charger 15M User Manual

1. General Product Overview

The GONEO Type 2 Schuko Portable EV Charger is designed for safe and efficient charging of electric vehicles and plug-in hybrids. It features intelligent temperature control, advanced leakage protection (AC 30mA + DC 6mA), and automatic ground detection to ensure a secure charging experience. With adjustable current settings and a delay timer, users can optimize charging for convenience and cost savings. The charger is built with durable materials and includes a clear LED display for real-time monitoring of charging parameters.

2. Unboxing: Product and Accessories

Malli tiftaħ il-pakkett, issib l-oġġetti li ġejjin:

• Portable Electric Vehicle Charger (15M cable length)
• Manwal għall-Utent
• Nails (for hanging the EV charger)
• Borża tal-Ġarr

Image showing the GONEO Portable EV Charger, user manual, and mounting accessories.

3. Setup

3.1 Immuntar tal-Ċarġer

The charger can be mounted on a wall using the provided expansion screws. Ensure the mounting surface is stable and can support the weight of the charger and cable.

1. Identify a suitable location near a 16A Schuko outlet.
2. Mark the positions for the screws using the charger's mounting holes as a guide.
3. Drill holes and insert the expansion screws.
4. Hang the charger securely on the installed screws.

Visual guide for connecting the charger to a power source and vehicle.

3.2 Konnessjoni mal-Enerġija

Before connecting, ensure your Schuko outlet is rated for at least 16A and has proper grounding. Incorrect amperage or lack of grounding can pose safety risks.

1. Insert the Schuko plug into a compatible wall outlet.
2. The charger's LED display will illuminate, indicating it is in standby mode.
3. The charger performs an automatic ground connection check. A red indicator light will illuminate if a ground fault is detected (Error E40), indicating a potential safety hazard. Do not proceed with charging if this error occurs.

Comparison of correct grounding (left) and a ground fault (right) on the charger display.

Important: Always verify the maximum amperage of your Schuko outlet before charging. Incorrect configurations can cause overheating or pose a safety risk.

4. Istruzzjonijiet Operattivi

4.1 Aġġustament tal-Kurrent tal-Iċċarġjar

The charger allows you to select from various current settings (6A/8A/10A/13A/16A) to match your vehicle's requirements and available power supply.

1. New Interface: Press and hold the start button for 3-7 seconds until the light strip changes to a blinking green (P1, new interface), then release.
2. Aġġusta l-Kurrent: Briefly press the start button again to cycle through the desired current values. The number will blink.
3. Wait for the number to stop blinking (approx. 7 seconds) to confirm the setting. The charger will automatically save the last configuration.

Visual guide for setting the charging current and delay timer.

4.2 Setting a Delay Timer

You can set a delay timer (1H/2H/4H/8H) to start charging at a later time, which is useful for taking advantage tar-rati tal-elettriku off-peak.

1. New Interface: Press and hold the start button for 3-7 seconds until the light strip changes to a blinking green (P1, new interface), then release.
2. Aġġusta l-Kurrent: Briefly press the start button again to cycle through the desired current values.
3. Adjust Delay Time: Press and hold the start button again for 3-5 seconds. The light strip will blink cyan, and the delay time number will blink. Briefly press the start button to cycle through the desired delay times.
4. Wait for the number to stop blinking (approx. 7 seconds) to confirm the setting. The charger will automatically save the last configuration.
5. Connect the charging connector to your vehicle. The countdown for the programmed delay will begin.
6. Once the countdown is complete, the portable EV charger will begin supplying power to the vehicle. The light strip will turn blue and blink.

Benefit from smart scheduled charging to save on electricity costs.

4.3 Checking Temperature

You can check the real-time temperature of the plug and the control box, as well as the voltage, on the LED display.

1. Press and hold the start button for 7-10 seconds until the light strip turns solid cyan.
2. Il-wiri se juri l-voltage, plug temperature, and control box temperature.

Learn more about the portable EV charger's LED display and its indicators.

5. Karatteristiċi tas-Sigurtà

5.1 Smart Temperature Control

The charger is equipped with intelligent NTC temperature sensors in both the Schuko plug and the control box. This ensures safe charging by automatically adjusting power if overheating is detected.

• If the temperature exceeds 65°C, the charging current is automatically reduced to 6A.
• If the temperature rises above 70°C, charging is automatically stopped to prevent overheating and ensure vehicle safety.

Integrated NTC temperature sensors in the Schuko plug and EV charger for safe charging.

5.2 Advanced Leakage Protection (AC 30mA + DC 6mA)

This portable EV charger offers dual leakage protection, exceeding standard charging cables. It is designed to prevent electrical hazards, fires, and battery damage, complying with EU electrical safety regulations.

The charger features RCD 30mA AC + 6mA DC differential protection.

5.3 Automatic Ground Detection

Each time the charger is connected, an automatic ground connection verification is performed. A red indicator light illuminates when a ground fault is detected, allowing you to safely charge your electric or plug-in hybrid vehicle without technical knowledge.

5.4 Multiple Integrated Safety Protections

The GONEO portable EV charger incorporates 15 layers of protection to ensure maximum safety during use:

• Overvoltage Protezzjoni
• Undervoltage Protezzjoni
• Protezzjoni ta 'kurrent żejjed
• Protezzjoni ta 'ċirkwit qasir
• Protezzjoni kontra t-tnixxija
• Protezzjoni ta 'tisħin żejjed
• Protezzjoni tal-Ħtija tal-Art
• Anti-static Protection
• Relay Adhesion Protection
• Protezzjoni tat-tqabbid
• Protezzjoni ESD
• Diode Detection Protection
• EV Type 2 Communication Failure Protection
• Charging Disconnection Protection
• Active Charging Stop

The GONEO EV charger features multiple integrated safety protections.

6. Durability and Compatibility

6.1 Robust Construction

The charger is built with a robust TPU cable, silver-plated connectors, and flame-retardant materials, ensuring durability and resistance to wear and heat. Each component is rigorously tested for long-term reliability and safety.

• Kaxxa tal-Kontroll: UL94 V-0 casing, incandescent wire test at 960°C.
• Type 2 Charging Port: Tested for 10,000+ connection/disconnection cycles.
• TPU Charging Cable: Tested for 20,000+ bending cycles.
• Plagg Schuko: Integrated NTC temperature sensors.

Components tested for long-term durability and safety.

6.2 Environmental Resistance

The charger is suitable for use in various environments, designed to withstand extreme temperatures and weather conditions.

• Operating temperature range: -30°C to +50°C (-22°F to 122°F).
• Water and dust resistance: IP55 rating.

The charger is suitable for use in diverse environments.

6.3 Kompatibilità Universali

The charger is compatible with all Type 2 (IEC 62196-2) electric vehicles and plug-in hybrids, offering a flexible charging solution for European drivers.

Compatible with all Type 2 electric vehicles.

6.4 Cable Length Options

The GONEO portable EV charger is available in multiple cable lengths to provide maximum flexibility depending on your parking situation. This model features a 15-meter cable.

Multiple cable lengths are available for optimal flexibility.

7. Speċifikazzjonijiet

8 Issolvi l-problemi

If you encounter any issues with your GONEO Portable EV Charger, please refer to the following common troubleshooting steps:

• Il-ċarġer mhux qed jixgħel: Ensure the Schuko plug is fully inserted into a live outlet. Check the household circuit breaker.
• Error E40 (Ground Fault): This indicates an improper or missing ground connection. Disconnect the charger immediately. Check the wall outlet's grounding. Do not use the charger if this error persists.
• L-iċċarġjar jieqaf bla mistenni: This could be due to overheating. Allow the charger to cool down. Ensure proper ventilation around the control box. Check for any obstructions or damage to the cable.
• Current setting not saving: Ensure you wait approximately 7 seconds after selecting the desired current for the setting to be confirmed and saved.
• Il-vettura mhux qed tiċċarġja: Ensure the Type 2 connector is securely plugged into the vehicle's charging port. Check the vehicle's charging settings.

For persistent issues, please contact GONEO customer support.

9. Garanzija u Appoġġ

Your GONEO Portable EV Charger comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact GONEO customer service through the contact information provided in the user manual or on the official GONEO websit.

Servizz tal-Klijent: Please refer to the contact details provided in your product packaging or visit the GONEO official websit għall-appoġġ.