RENAISSER Raphael N520C Stylus Instruction Manual

Introduzzjoni

The RENAISSER Raphael N520C Stylus is designed to provide a precise and natural writing and drawing experience on compatible Microsoft Pen Protocol (MPP) devices. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your stylus.

Kompatibilità

The Raphael N520C Stylus is compatible with devices supporting Microsoft Pen Protocol (MPP 2.0). Please verify your device's compatibility before use. For specific models, refer to the list below or contact customer support.

Apparati Kompatibbli:

• Microsoft Surface Series: Surface Pro 12/11/10/9/X/8/7+/7/6/5/4/3; Surface Laptop 5/4/3/2/1; Surface Book 3/2/1; Surface Go 4/3/2/1; Surface Studio 2+/2/1; Surface Duo/Duo 2; Surface Laptop Studio.
• Kobo eReaders: Kobo Libra Colour, Kobo Sage, Kobo Elipsa, Kobo Elipsa 2E.
• Other MPP-enabled devices: Including select models from ASUS, HP, and DELL. For a comprehensive list, please refer to the compatibility image or contact service@renaisser.com.

Important: The 2025 New Surface Laptop/Laptop 7/Laptop 6 and Surface Laptop Go series are NOT compatible with this stylus.

Image: Detailed compatibility list for RENAISSER Stylus across various brands and models.

Setup

1. Charging the Stylus

The Raphael N520C Stylus features a USB-C charging port. Use any standard USB-C cable (not included) to charge the device. The LED indicator will show charging status.

• A 20-minute charge provides approximately 50 hours of use.
• A full 1-hour charge provides over 110 hours of use.

Image: Illustration of USB-C charging for the Raphael N520C Stylus, highlighting fast charging capabilities.

The charging port is located on the round side of the stylus, designed to prevent obstruction when attached to a Surface device (though this model does not feature magnetic attachment).

Image: Comparison showing the USB-C charging port placement on the Raphael N520C.

2. L-Użu Inizjali u t-Tqabbil

The Raphael N520C Stylus utilizes MPP 2.0 technology for automatic connection with compatible devices. Simply power on the stylus (if applicable, though typically it's always on or wakes on touch) and begin using it with your device. No manual Bluetooth pairing is generally required for MPP devices.

3. Replacing the Stylus Tip

The stylus comes with one replacement tip (MU1). To replace a worn tip:

1. Gently pull the old tip straight out from the stylus body.
2. Insert the new tip firmly into the stylus body until it clicks into place.

Image: Contents of the eco-friendly packaging, including the stylus and a replacement tip.

Istruzzjonijiet Operattivi

Użu Bażiku

The Raphael N520C Stylus functions like a traditional pen for writing, drawing, and navigating on your compatible touchscreen device. Its MPP 2.0 technology ensures a smooth and responsive experience.

Pressure and Tilt Sensitivity

The stylus supports 4096 levels of pressure sensitivity and tilt sensitivity. This allows for varying line thickness and shading effects, similar to using a real pencil or brush. These features are dependent on the application and pen brushes used.

Image: Diagram illustrating the advanced features of MPP 2.0, including 4096 pressure levels and tilt sensitivity.

Buttuni tal-Ġenb

The stylus body features two buttons for enhanced functionality:

• Buttuna tal-Ikklikkjar bil-Lemin: Functions as a right-click for context menus or selection.
• Buttuna tal-Gomma: Activates the eraser function in compatible applications.

Immaġni: Dettaljata view of the Raphael N520C Stylus, pointing out the right-click and erase buttons.

Ċaħda tal-Palm

The palm rejection feature allows you to rest your hand comfortably on the screen while writing or drawing without causing unintended marks or interference.

Ġestjoni Intelliġenti tal-Enerġija

To conserve battery life, the stylus will automatically turn off after 10 minutes of inactivity.

Manutenzjoni

Iċċarġjar

Regularly charge your stylus using a USB-C cable to ensure continuous operation. Avoid completely draining the battery for optimal battery longevity.

Tindif

Wipe the stylus body with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials, as these may damage the finish or internal components.

Sostituzzjoni tal-ponta

Replace the stylus tip when it shows signs of wear or damage to maintain optimal performance. Refer to the "Replacing the Stylus Tip" section under Setup for instructions.

Issolvi l-problemi

Stylus Mhux Jirrispondi

• Iċċekkja l-batterija: Ensure the stylus is sufficiently charged. Connect it to a USB-C power source.
• Iċċekkja l-Kompatibbiltà: Verify that your device is listed as compatible with the Raphael N520C Stylus and supports MPP. Refer to the Compatibility section.
• Irristartja l-Apparat: Sometimes, restarting your tablet or laptop can resolve connectivity issues.
• Iċċekkja għal Aġġornamenti: Ensure your device's operating system and drivers are up to date.

Inaccurate or Overly Sensitive Input

• Tip Condition: Inspect the stylus tip for wear or damage. A worn tip can affect accuracy. Replace if necessary.
• Settings tal-App: Some applications allow adjustment of pen sensitivity. Check the settings within the app you are using.
• Kalibrazzjoni tal-Apparat: Your device may have pen calibration settings in its system preferences.

Side Buttons Not Functioning

• Appoġġ għall-App: Ensure the application you are using supports the right-click and eraser functions of a stylus.
• Settings tal-Apparat: Check your device's pen settings for any customization options or conflicts.

No Magnetic Attachment

The RENAISSER Raphael N520C Stylus does not feature magnetic attachment capabilities. This is by design and not a defect. Consider a pen loop or case for storage.

Speċifikazzjonijiet

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

RENAISSER provides a 12-il xahar garanzija mingħajr inkwiet for the Raphael N520C Stylus, covering manufacturing defects and malfunctions under normal use.

Appoġġ għall-Klijent

For any questions regarding compatibility, technical support, or warranty claims, please contact RENAISSER customer service:

• Email: service@renaisser.com

When contacting support, please provide your product model number (Raphael N520C) and a detailed description of your inquiry.