PGST PG103-C+T53 Home Security Alarm System User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your PGST PG103-C+T53 Home Security Alarm System. Please read this manual thoroughly before using the system to ensure proper functionality and safety.

2. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• 1 x PGST Control Panel (Alarm Host)
• 2 x Motion Sensors
• 4 x Sensuri tal-Bieb/Tieqa
• 2 x Karti RFID
• 2 x Kontrolli mill-bogħod
• 1 x Kamera tas-Sigurtà
• 1 x 64GB SD Card
• 1 x Power Adapter for Control Panel
• 1 x Manwal tal-Utent (dan id-dokument)

Image 2.1: All components included in the PGST PG103-C+T53 Home Security Alarm System kit.

3. Setup u Installazzjoni

3.1. Installazzjoni tal-Panew tal-Kontroll

1. Konnessjoni tal-Enerġija: Connect the control panel to a power outlet using the provided power adapter. The panel includes a backup lithium-ion battery.
2. Qawwa Inizjali Mixgħula: The panel will power on automatically. Follow the on-screen prompts for initial setup.
3. Pjazzament: Install the control panel in a central location within your home, away from direct sunlight and moisture, and within Wi-Fi range.

Immaġni 3.1: Eż.ample placement of the PGST Control Panel.

3.2. App Integration (Smart Life / Tuya Smart)

1. Niżżel l-App: Download the "Smart Life" or "Tuya Smart" app from your mobile device's app store.
2. Ħolqien tal-Kont: Irreġistra għal kont ġdid jew idħol jekk diġà għandek wieħed.
3. Żid Apparat: In the app, tap "+" to add a new device. Select "Security & Video Surveillance" then "Alarm (Wi-Fi)".
4. Qabbad mal-Wi-Fi: Follow the in-app instructions to connect the control panel to your 2.4GHz Wi-Fi network. (5GHz Wi-Fi is not supported).

Image 3.2: The Smart Life app interface for managing your security system.

3.3. Installazzjoni u Tqabbil tas-Sensuri

All sensors are pre-paired with the control panel. If re-pairing is needed, refer to the control panel's on-screen menu or app instructions.

3.3.1. Motion Sensors

• Pjazzament: Install motion sensors in corners of rooms, hallways, or areas where intruders would likely pass. Mount them at a height of 6-8 feet (1.8-2.4 meters) for optimal detection.
• Evita: Do not place near heat sources, direct sunlight, or areas with significant air drafts.
• Firxa ta' sejbien: Each motion sensor has a detection range of approximately 32 feet (10 meters) and a 110° field of view.

Image 3.3: Motion sensor detection range and field of view.

3.3.2. Door/Window Sensors

• Installazzjoni: Mount the main sensor unit on the door or window frame and the smaller magnet unit on the moving part (door or window). Ensure the two parts are aligned and within 0.5 inches (1.2 cm) of each other when the door/window is closed.
• Sekwestru Sikur: Use the provided adhesive pads or screws for secure installation.

Immaġni 3.4: Eż.amples of door/window sensor installation.

3.4. Remote Controls and RFID Cards

• Kontrolli mill-bogħod: Use the remote controls to arm, disarm, or trigger an emergency alarm. Buttons are typically labeled for these functions.
• Karti tal-RFID: Tap an RFID card on the designated area of the control panel to quickly arm or disarm the system.

Image 3.5: Using an RFID card for quick system control.

3.5. Security Camera Setup

Refer to the separate manual provided with the security camera for detailed setup instructions. Once configured, the camera can often be integrated and viewed through the Smart Life/Tuya Smart app.

3.6. 4G SIM Card Installation (Optional)

For SMS and phone call alerts, insert a 2G/3G/4G SIM card into the designated slot on the control panel. Ensure the SIM card is active and has sufficient credit/data. Note that telephone and SMS services may incur additional fees from your mobile carrier.

Image 3.6: Connectivity options: Wi-Fi for app alerts and 4G/GSM for calls/SMS (SIM card not included).

4. Operazzjoni

4.1. L-Armar u d-Diżarmar tas-Sistema

• Armar (Modalità 'l Bogħod): Activates all sensors. Use when leaving the property. Can be done via control panel, remote, RFID card, or app.
• Iddiżarma: Deactivates all sensors. Use when returning home. Can be done via control panel, remote, RFID card, or app.
• Home Mode (Stay Arm): Activates perimeter sensors (e.g., door/window sensors) while allowing free movement inside. Check app settings for configuration.

Immaġni 4.1: Eż.ample of scheduled arming and disarming for daily routines.

4.2. Twissijiet u Notifiki

• Sirena: If a sensor is triggered while armed, the 120dB siren will activate to deter intruders.
• Notifiki tal-App: Receive real-time alerts on your smartphone via the Smart Life/Tuya Smart app.
• Phone Calls/SMS: If a SIM card is installed and configured, the system can send SMS messages and make calls to pre-set emergency contacts.

Immaġni 4.2: Eż.ample of real-time alarm notifications on a smartphone.

4.3. Kontroll tal-Vuċi b'Alexa

To enable voice control, link your Smart Life/Tuya Smart account with Amazon Alexa. Once linked, you can use voice commands such as "Alexa, arm my home" or "Alexa, disarm my home" (a PIN may be required for disarming).

Image 4.3: Integrating the alarm system with Amazon Alexa for voice control.

4.4. Anti-Tamper Funzjoni

The control panel features a physical anti-tamper mechanism. Any forced removal or tampering with the panel will trigger an immediate alarm. The alarm can only be stopped by entering the correct password on the panel.

4.5. Expanding Your System

The PGST system supports up to 99 additional sensors. To add new sensors, refer to the "Add Device" section in the Smart Life/Tuya Smart app or the control panel's settings menu.

5. Manutenzjoni

5.1. Sostituzzjoni tal-batterija

• Panel tal-Kontroll: The control panel has a built-in rechargeable lithium-ion battery for backup power. It charges automatically when connected to AC power.
• Sensers: Motion sensors and door/window sensors are battery-powered. The app or control panel will indicate low battery status. Replace batteries with the specified type (usually CR2032 or AAA, check individual sensor labels).
• Kontrolli mill-bogħod: Remote controls use button cell batteries. Replace when functionality decreases.

5.2. Tindif

Wipe the control panel and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the devices.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation included with your purchase or contact PGST customer service directly. Contact details can typically be found on the manufacturer's webis-sit jew l-imballaġġ tal-prodott.

Online resources and FAQs may also be available through the Smart Life or Tuya Smart app support sections.