Andeman Ep155 & Ep177 Car Jump Starter with Air Compressor User Manual

1. Introduzzjoni

This manual provides essential information for the safe and effective operation of your Andeman Ep155 or Ep177 Car Jump Starter with Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed to jump start 12V vehicles and, for the Ep177 model, also functions as a portable tire inflator and power bank.

2. Informazzjoni dwar is-Sigurtà

WARNING: Improper use can result in injury or damage to the device and vehicle. Always follow these safety guidelines.

Żomm fejn ma jintlaħaqx mit-tfal.
Tgħaddix l-apparat fl-ilma.
Toperax f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab li jaqbdu.
Żgura ventilazzjoni xierqa waqt l-użu.
Do not disassemble the device. Contact qualified service personnel for repairs.
Avoid direct exposure to sunlight or high temperatures.
Uża biss is-smart cl provdutampi u aċċessorji.
Kun żgur li l-apparat ikun iċċarġjat kompletament qabel l-użu għal prestazzjoni ottimali.
The device features 10 advanced safety protections, including Overload Protection, Sparks Protection, Reverse Charges Protection, Reverse Polarities Protection, Over Currents Protection, Low Temperature Protection, Over Charges Protection, and Short Circuits Protection.

Diagram illustrating 10 safety protections of the Andeman jump starter — Figure 2.1: The Andeman jump starter incorporates 10 safety protections for secure operation, including safeguards against overcharge, over-discharge, overcurrent, short circuit, overvoltage, reverse connection, over temperature, voltage regulation, reverse charge, and reverse polarity.

3. Prodott Aktarview u Komponenti

Your Andeman Car Jump Starter is a multi-functional device designed for emergency vehicle starting, and for the Ep177 model, also includes a portable air compressor and power bank capabilities.

Andeman jump starter with smart clamps and inflation nozzles — Figure 3.1: The Andeman jump starter unit shown with its smart battery clamps and various inflation nozzles for different applications.

Andeman jump starter demonstrating both jump start and tire inflation functions — Figure 3.2: This image highlights the dual functionality of the Ep177 model, serving as both a 4000A jump starter and a 150PSI tire inflator.

Kontenut tal-Pakkett:

Andeman Car Jump Starter (Ep155 or Ep177)
Smart Battery Clamps
Cable tal-Iċċarġjar tal-USB-C
Inflation Nozzles (for Ep177 model)
Manwal għall-Utent

4. Speċifikazzjonijiet

Karatteristika	Ep155 Model	Ep177 Model
L-ogħla Kurrenti	3000A	4000A
Kapaċità tal-batterija	20000mAh	24000mAh
Kompatibilità tal-Magna (Gass)	Sa 9.0L	Sa 8.5L
Kompatibilità tal-Magna (Diżil)	Sa 7.0L	Sa 7.0L
Starts per Charge	Sa 80 darbiet	Sa 70 darbiet
Ħin ta' Standby	24 xhur	48 xhur
Air Compressor (PSI)	N/A	Sa 150PSI
Charging Input (Type-C)	5V/3A, 9V/2A, 12V/1.5A
Output USB-A	QC3.0
Output USB-B	5V/3A
Produzzjoni DC	15V
Ħin tal-Ħlas Sħiħ	Madwar sagħtejn
Flashlight LED	240 Lumens, 36 hours battery life

Andeman 4000A Jump Starter connected to a car battery in an engine bay — Figure 4.1: The Ep177 model, a 4000A jump starter, is suitable for various 12V vehicles, capable of starting 8.5L gas or 7L diesel engines.

5. Setup u Iċċarġjar

5.1 Ħlas Inizjali

Before first use, fully charge the jump starter. Connect the provided USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The device supports bi-directional fast charging, achieving a full charge from 0% to 100% in approximately 1.8 hours.

Andeman jump starter being charged via Type-C cable in a car console — Figure 5.1: The jump starter can be fast-charged via its Type-C port, allowing for quick readiness. A 10-minute charge can provide enough power for a jump start.

5.2 Iċċekkjar tal-Livell tal-Batterija

The device features a digital display or indicator lights to show the current battery level. Ensure the device has sufficient charge before attempting to jump start a vehicle or inflate tires.

6. Istruzzjonijiet Operattivi

6.1 Aqbeż Startjar ta' Vettura

Kun żgur li l-jump starter huwa ċċarġjat mill-inqas 50%.
Itfi l-ignition tal-vettura u l-aċċessorji kollha.
Qabbad il- aħmar (+) clamp mat-terminal pożittiv (+) tal-batterija tal-vettura.
Qabbad il- iswed (-) clamp mat-terminal negattiv (-) tal-batterija tal-vettura jew ma' parti tal-metall solida u mhux miżbugħa tal-blokka tal-magna.
Ipplaggja l-smart clamp connector into the jump starter's port. The indicator light on the smart clamp should turn green, indicating a correct connection. If it's red or flashing, check connections and battery voltage.
Start the vehicle. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
Once the vehicle starts, immediately disconnect the smart clamp konnettur mill-jump starter.
Remove the black (-) clamp l-ewwel, imbagħad il-klamp aħmar (+)amp mill-batterija tal-vettura.

6.2 Using the Air Compressor (Ep177 Model Only)

The Ep177 model features a built-in air compressor capable of delivering up to 150PSI.

Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
Power on the jump starter. The current tire pressure will be displayed.
Uża l-buttuni '+' u '-' biex tissettja l-pressjoni mixtieqa.
Press the inflation button to start the compressor. The compressor will automatically stop once the preset pressure is reached.
Skonnettja l-pajp tal-arja mill-valv tat-tajer.

Note: For continuous use, it is recommended to rest the compressor for 10 minutes after every 10 minutes of operation to prevent overheating. A full charge can inflate 195/60 R15 tires from 0 to full approximately 4-5 times.

Andeman jump starter with digital display showing tire pressure and inflation icons — Figure 6.1: The Ep177 model's digital display shows current pressure and allows setting target pressure for tire inflation. It can inflate various items including car, motorcycle, bicycle tires, and sports equipment.

6.3 Użu bħala Power Bank

The jump starter can also function as a portable power bank to charge electronic devices.

Connect your device's charging cable to the appropriate output port on the jump starter (USB-A QC3.0, USB-B 5V/3A, or Type-C 5V/3A, 9V/2A, 12V/1.5A).
The device will automatically begin charging.
The DC15V output port can power compatible devices like tire inflators (if not using the built-in one) or car refrigerators.

Andeman jump starter charging multiple devices like a laptop, smartwatch, and smartphone — Figure 6.2: The 24000mAh capacity allows the jump starter to serve as a power bank, compatible with over 1000 devices, including laptops, smartwatches, and smartphones.

6.4 L-Użu tat-Torċa LED

The built-in 240 lumens LED flashlight offers multiple modes for various situations.

Press the flashlight button once to turn on the steady light.
Press again for SOS mode (flashing slowly).
Press a third time for Strobe mode (flashing rapidly).
Agħfas ir-raba 'darba biex itfi l-flashlight.

The flashlight provides up to 36 hours of battery life.

Andeman jump starter's LED flashlight illuminating various scenarios like camping, roadside emergency, power failure, and car repair — Figure 6.3: The 240 lumens LED flashlight provides illumination for outdoor camping, roadside emergencies, power failures, and car repair tasks.

7. Manutenzjoni

7.1 Iċċarġjar

To maintain optimal battery health, recharge the jump starter every 3-6 months, even if not in use. This prevents deep discharge and extends battery life.

7.2 Ħażna

Aħżen l-apparat f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
Keep the device and accessories in the provided carrying case to protect them from damage.

7.3 Tindif

Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.

8 Issolvi l-problemi

8.1 Il-Vettura Ma Tibdax

Iċċekkja l-livell tal-batterija: Kun żgur li l-jump starter għandu ċarġ biżżejjed.
Iċċekkja l-konnessjonijiet: Ivverifika li l-ismart clamphuma konnessi sew mat-terminals korretti tal-batterija (aħmar għall-pożittiv, iswed għan-negattiv).
Smart clamp indikatur: If the indicator is red or flashing, refer to the smart clamp's instructions for error codes.
Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, the jump starter may not be able to start it.

8.2 Air Compressor Not Working (Ep177 Only)

Iċċekkja l-livell tal-batterija: Kun żgur li l-jump starter għandu ċarġ biżżejjed.
Konnessjoni tal-pajp: Verify the air hose is securely connected to both the device and the tire valve.
Is-sħana żejda: If the compressor has been running for an extended period, it may have overheated. Allow it to cool down for 10-15 minutes before attempting to use it again.

8.3 L-Apparat Mhux Qed Jiċċarġja

Kejbil: Ensure the USB-C charging cable is not damaged and is properly connected.
Adapter tal-enerġija: Verify the USB power adapter is functional and provides adequate power output.

9. Garanzija u Appoġġ

Your Andeman jump starter is UL Certified, ensuring it meets stringent safety standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Andeman websit.

For further assistance, please contact Andeman customer support.