SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller User Manual

1. Introduzzjoni

This manual provides instructions for the installation, operation, and maintenance of the SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller. This device is designed for seamless integration into lighting systems, offering wireless control for both residential and commercial applications. It operates on 120-277VAC line voltage and supports various load types.

Figure 1: SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller with its packaging.

2. Informazzjoni dwar is-Sigurtà

• TWISSIJA: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Disconnect power at the circuit breaker or fuse before installing or servicing the device.
• Do not use this device with loads exceeding its specified ratings.
• Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u iżolati sew.
• Dan l-apparat huwa maħsub għall-użu fuq ġewwa biss.
• The device meets regulatory guidelines for current leakage, ensuring safe operation.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Wireless Wall Switch and Load Controller (SWX-851-WH)
• Wajer Leads
• Viti tal-Immuntar
• Wajer Ġewż
• Istruzzjonijiet (dan il-manwal)

4. Setup u Installazzjoni

4.1 Istruzzjonijiet tal-Wiring

The SWX-851-WH supports both 2-wire and 3-wire installations and does not require a neutral connection or a minimum load. It is compatible with 120-277VAC line voltagsistemi e.

• Qabel ma tibda: Itfi l-enerġija fis-circuit breaker.
• Identify the LINE (hot) and LOAD wires in the wall box.
• Connect the wires from the SWX-851-WH to the corresponding wires in the wall box using the provided wire nuts:
  • Wajer Iswed: Connect to LINE (hot) wire.
  • Wajer Blu: Connect to LOAD wire.
  • Wajer Aħdar: Connect to GROUND wire.
  • White (or Yellow/Green) Wire: This is the NEUTRAL connection. If a neutral connection is available and desired, connect it. If no neutral is present or required, cap this wire off.
• Kun żgur li l-konnessjonijiet kollha huma siguri.

Figura 2: Wara view of the SWX-851-WH, illustrating wiring connections. Black for Line, Blue for Load, Green for Ground, and White/Yellow/Green for Neutral (optional).

4.2 Installazzjoni Fiżika

• Carefully push the wired controller into the wall box. The compact design allows for easier installation in crowded boxes.
• Secure the controller to the wall box using the provided mounting screws.
• Install the wall plate (not included) over the controller.
• Irrestawra l-enerġija fis-circuit breaker.

4.3 Tqabbil mingħajr Fili

The SWX-851-WH can be paired with up to 30 wireless sensors and remote wall stations for automatic lighting control. Refer to the specific instructions for your SENSORWORX wireless sensors or remote wall stations for pairing procedures. Typically, pairing involves a sequence of button presses on both devices.

For detailed instructions, you may scan the QR code on the back of the device or visit the SENSORWORX website. A direct link to the instructions is available hawn.

5. Operazzjoni

5.1 Kontroll Bażiku Mixgħul/Mitfi

The primary function of the SWX-851-WH is to control connected lighting loads. Press the button on the switch to toggle the connected lights ON or OFF.

Figura 3: Quddiem view of the SWX-851-WH, showing the control button.

5.2 Konfigurazzjoni Avvanzata

The SWX-851-WH offers configurable settings for time delays, operational modes (occupancy, vacancy, switch disable), and photocell settings. These adjustments can be made without removing the cover plate, typically through specific button press sequences or via a paired sensor/programmer.

• Modalità ta' Okkupazzjoni: Lights turn ON automatically when occupancy is detected and OFF after a set time delay when the space is vacant.
• Modalità vakanza: Lights must be turned ON manually but turn OFF automatically after a set time delay when the space is vacant.
• Switch Disable Mode: Disables the local switch button, allowing control only via paired wireless devices.
• Issettjar tal-fotoċellola: Adjusts light level thresholds for automatic control based on ambient light.

Consult the full product documentation or the SENSORWORX website for detailed instructions on accessing and modifying these advanced settings.

6. Manutenzjoni

• Tindif: To clean the device, wipe with a soft, damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu. Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf.
• Spezzjoni: Periodically inspect the device for any signs of damage or loose connections. If damage is found, disconnect power and contact a qualified electrician.
• L-ebda partijiet li jistgħu jintużaw mill-utent ma huma ġewwa.

7 Issolvi l-problemi

If the problem persists after attempting these solutions, contact SENSORWORX customer support or a qualified electrician.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Garanzija tal-Prodott

The SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller comes with a garanzija ta 'sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase.

9.2 Appoġġ għall-Klijent

For technical assistance, troubleshooting, or warranty inquiries, please contact SENSORWORX customer support. Visit the official SENSORWORX websit għal informazzjoni ta' kuntatt u riżorsi addizzjonali.

Websit: www.sensorworx.com