mGYDY Bafang 810S LCD eBike Display User Manual

1. Introduzzjoni

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Informazzjoni dwar is-Sigurtà

• Dejjem kun żgur li d-displej ikun immuntat sew qabel ma ssuq.
• Do not attempt to disassemble or modify the display. This may void the warranty and cause damage.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Prodott Aktarview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

Immaġni: Fuqview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Karatteristiċi ewlenin:

• Color VA LCD: Wiesgħa viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Wirja Komprensiva tad-Data: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltage fil-mijatagu).
• Luminożità aġġustabbli: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Modalità Mixi: Provides assistance when walking alongside your e-bike.
• Wiri tal-Kodiċi ta' Żball: Jindika ħsarat fis-sistema.
• Grad li ma jgħaddix ilma minnu: IP65, resistant to rain and splashing water.

5. Speċifikazzjonijiet

Immaġni: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Setup u Installazzjoni

Kontroll tal-Kompatibbiltà:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the Protokoll ta 'komunikazzjoni UART u a 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

Immaġni: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Passi ta' Installazzjoni:

1. Immonta l-Wiri: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Qabbad il-Cable: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Ġestjoni tal-Kejbil: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. L-Ewwel Tixgħil: After installation, power on your e-bike to verify the display functions correctly.

7. Istruzzjonijiet Operattivi

The 810S display features an intuitive interface with an independent button for navigation and settings.

Funzjonijiet tal-Wiri:

• Indikatur tal-Veloċità: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• Indikatur tal-batterija: Provides a 5-level power indicator and voltage fil-mijatage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Kontroll tad-dawl ta' quddiem: Activate or deactivate your e-bike's headlight (if connected).
• Modalità Mixi: Engage for low-speed assistance when pushing the bike.
• Kodiċi ta' Żball: Displays codes if a system fault is detected.

Immaġni: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Aġġustament tas-Settings:

• Issettjar tal-luminożità: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Power-on Password: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

Immaġni: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Manutenzjoni

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• Tindif: Uża artab, damp drapp biex tnaddaf l-iskrin tal-wiri. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-iskrin jew lill-iskrin.asing.
• Reżistenza għall-Ilma: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Ħażna: Meta ma tkunx qed tużaha għal perjodi twal, aħżen l-e-bike u l-wiri f'post niexef u frisk, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Kontroll tal-Konnessjoni: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

Immaġni: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9 Issolvi l-problemi

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• Id-Displej Mhux Mixgħul:
  • Check if the e-bike battery is charged and turned on.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Kodiċi ta' Żball Murija:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Qari mhux eżatt:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

Jekk il-problemi jippersistu, ikkuntattja lill-bejjiegħ jew tekniku kwalifikat tal-e-bike għall-għajnuna.

10. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ għall-klijenti, jekk jogħġbok irreferi għad-dokumentazzjoni pprovduta fil-ħin tax-xiri jew ikkuntattja lill-bejjiegħ tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.