OREiN 1

OREiN 3000 Lumen Outdoor Motion Sensor Light

Model: 1 | Brand: OREiN

Introduzzjoni

Thank you for choosing the OREiN Outdoor Motion Sensor Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and keep them for future reference.

This outdoor light features a high-efficiency 3000 lumen LED, a 180-degree adjustable motion sensor, and three selectable color temperatures (2700K, 4000K, 6500K). Its robust IP65-rated construction ensures reliable performance in various outdoor conditions.

Istruzzjonijiet tas-Sigurtà

  • Always disconnect power at the circuit breaker before installation, maintenance, or cleaning.
  • L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jew minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
  • Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u jikkonformaw mal-kodiċijiet elettriċi lokali.
  • Tħarisx direttament fis-sors tad-dawl LED meta jkun mixgħul, għax dan jista' jikkawża ħsara lill-għajnejn.
  • Do not modify the fixture or use it for purposes other than its intended use.
  • Żomm il-materjali tal-ippakkjar 'il bogħod mit-tfal.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-komponenti kollha huma preżenti u mhux imħassra:

  • OREiN Outdoor Motion Sensor Light Fixture
  • Bracket tal-Immuntar
  • Viti tal-Immuntar u Ankri tal-Ħajt
  • Manwal ta' Istruzzjoni

Speċifikazzjonijiet

BrandOREIN
Numru tal-Mudell1
Konsum tal-Enerġija27 W
Fluss Luminuż3000 lm
Temperatura tal-Kulur2700K / 4000K / 6500K (Aġġustabbli)
Kwantità LED160 LEDs
Angolu ta 'Sejbien tal-Moviment180 grad
Distanza ta' Sejbien tal-Moviment2 - 12 metru
Tul tad-Dawl (ĦIN)30 sekondi - 8-il minuta
Sensittività għad-Dawl (LUX)20 - 2000 LUX
Klassifikazzjoni tal-IPIP65 (Li ma jgħaddix ilma)
MaterjalAcrylonitrile Butadiene Styrene (ABS)
Dimensjonijiet13 x 10 x 11 ċm
Għoli ta 'Immuntar Rakkomandat1.8 - 2.5 metru
It-tul tal-ħajja50,000 sigħat
Voltage220 Volts

Setup u Installazzjoni

  1. Ipprepara għall-Installazzjoni: Kun żgur li l-provvista tal-enerġija għaż-żona tal-installazzjoni tkun mitfija mis-circuit breaker.
  2. Immarka l-Punti tat-Tħaffir: Position the mounting bracket on the desired wall location. Use a pencil to mark the drilling points for the screws.
  3. Toqob tat-Tħaffir u Ankri tad-Daħħal: Drill holes at the marked points and insert the wall anchors (if necessary for your wall type).
  4. Immonta l-Bracket: Waħħal il-bracket tal-immuntar mal-ħajt billi tuża l-viti pprovduti.
  5. Wajer l-Apparat: Connect the electrical wires from your power supply to the fixture's terminals. Ensure correct connections for Live (L), Neutral (N), and Ground. The quick-connect technology allows for tool-free wiring.
  6. Waħħal it-tagħmir tad-dawl: Align the light fixture with the mounted bracket and securely attach it. The optimized installation design allows for quick attachment.
  7. Irrestawra l-Enerġija: Once the fixture is securely installed and wired, restore power at the circuit breaker.

Għoli tal-Immuntar Rakkomandat: For optimal motion detection, install the light between 1.8 to 2.5 meters (5.9 to 8.2 feet) above the ground.

Image showing the OREiN outdoor light installed on a wall during a rainstorm, emphasizing its IP65 waterproof rating and robust construction.
The OREiN outdoor light features an IP65 waterproof rating, ensuring durability and reliable operation in various weather conditions, including rain, heat, and rust resistance.

Istruzzjonijiet Operattivi

1. Adjustable PIR Sensor Settings

The motion sensor has three adjustable knobs on its underside to customize its behavior:

  • TIME (Lighting Time): Adjusts how long the light remains on after motion is detected. Range: 30 seconds to 8 minutes.
  • SENS (Detection Distance): Adjusts the sensitivity and range of the motion sensor. Range: 2 meters to 12 meters.
  • LUX (Sensittività għad-Dawl): Jiddetermina l-livell tad-dawl ambjentali li fih is-senser isir attiv.
    • 20 LUX (Min): The sensor will only activate in dark environments (nighttime).
    • 2000 LUX (Max): The sensor will activate in both daytime and nighttime conditions.
Close-up image of the OREiN outdoor light's adjustable knobs for TIME (lighting duration), SENS (detection distance), and LUX (light sensitivity).
This image shows the three adjustable knobs on the motion sensor: TIME (30 seconds to 8 minutes), SENS (2 to 12 meters detection distance), and LUX (20 LUX for night sensing only, 2000 LUX for all-day sensing). These allow customization of the light's behavior.

2. Color Temperature (CCT) Selection

The light offers three color temperature options. To switch between them, briefly click the CCT button (less than 0.5 seconds) located on the fixture:

  • 2700K: Warm White, ideal for cozy evenings on a terrace or patio.
  • 4000K: Neutral White, suitable for parking areas or bright work light.
  • 6500K: Cool White, provides active security lighting for garages and entrances.
Image showing the OREiN outdoor light switching between 2700K warm white, 4000K neutral white, and 6500K cool white light.
This image illustrates the three available color temperatures: 2700K for a warm ambiance, 4000K for a neutral light, and 6500K for a bright, cool light. The color temperature can be changed by clicking a button on the fixture.

3. Modi ta 'Dawl

The fixture supports three operational modes. Double-click the CCT button to cycle through these modes:

  • Mode 1: Motion Mode (Security Mode)
    The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness for the set TIME duration, then turns off.
  • Mode 2: D2D Mode (Dusk-to-Dawn Mode)
    At night, the light stays on continuously at 20% brightness. When motion is detected, it brightens to 100% for the set TIME duration, then returns to 20% brightness.
  • Mode 3: Manual Mode
    The light operates like a standard fixture, controlled by an external wall switch. The motion sensor is deactivated in this mode.
Image illustrating the three lighting modes of the OREiN outdoor light: Motion Mode (100% on/off), D2D Mode (20% night light, 100% on with motion), and Manual Mode (on/off via switch).
The light offers three operational modes, switchable by double-clicking: Motion Mode (activates 100% brightness upon motion, then turns off), D2D Mode (stays at 20% brightness at night, increases to 100% with motion, then returns to 20%), and Manual Mode (controlled by an external switch).
Image showing the OREiN outdoor light illuminating a wide area of 127 square meters, highlighting its 3000 lumen output and 27W power.
The OREiN outdoor light provides wide lighting coverage, illuminating up to 127 square meters with its 3000 lumens and 27W power, suitable for various outdoor spaces.
Image depicting the OREiN outdoor light's 180-degree motion detection range and up to 12-meter detection distance, with a car and people in the detection zone.
This image demonstrates the high sensitivity of the motion sensor, offering a 180-degree detection angle and a range of up to 12 meters. The recommended installation height is between 1.8 to 2.5 meters for optimal performance.

Manutenzjoni

  • Tindif: To clean the fixture, ensure power is disconnected. Wipe with a soft, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti elettriċi.
  • Spezzjoni: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
  • LEDs: The LEDs in this fixture are designed for a long lifespan (50,000 hours) and are not user-replaceable.

Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Id-dawl ma jixgħelx.Ebda provvista ta 'enerġija.
LUX setting too low (only activates at night).
Sensur tal-moviment imblukkat jew difettuż.		Iċċekkja s-circuit breaker u l-wajers.
Adjust LUX knob to a higher setting (e.g., 2000 LUX for testing).
Aċċerta ruħek li s-sensor ikollu linja ċara tal-vista.
Id-dawl jibqa' mixgħul kontinwament.Continuous motion in detection zone.
L-issettjar tal-ĦIN twil wisq.
Fixture is in D2D Mode or Manual Mode.		Clear the detection area of constant movement.
Aġġusta l-pum tal-ĦIN għal durata iqsar.
Double-click CCT button to switch to Motion Mode.
Is-senser tal-moviment mhux qed jiskopri.SENS setting too low.
Mounting height incorrect.
Obstructions blocking sensor.		Adjust SENS knob to a higher range.
Ensure mounting height is between 1.8-2.5m.
Neħħi kwalunkwe oġġett li jimblokka s-sensor view.
Teptip ħafif.Konnessjoni tal-wajers sfużi.
Provvista tal-enerġija instabbli.		Skonnettja l-enerġija u ċċekkja l-konnessjonijiet tal-wajers kollha.
Ikkonsulta elettriċista biex jivverifika l-istabbiltà tal-provvista tal-enerġija.

Garanzija u Appoġġ

This OREiN product comes with a 24-il xahar garanzija mid-data tax-xiri, li tkopri difetti fil-materjali u l-abbilità taħt użu normali.

For technical assistance, troubleshooting, or warranty claims, please contact our customer support team. We offer 7x24 hours support biex niżguraw is-sodisfazzjon tiegħek.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.

© 2025 OREiN. Id-drittijiet kollha riżervati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.