PIX Link LV-WR09 300Mbps Wireless-N Repeater/Router/AP User Manual

Prodott Overview

The PIX Link LV-WR09 is a versatile wireless networking device designed to extend your Wi-Fi coverage and provide flexible network solutions. It supports three primary modes of operation: Repeater Mode, Router Mode, and Access Point (AP) Mode, offering 300Mbps wireless-N speeds. This device is ideal for eliminating Wi-Fi dead zones and enhancing network performance in homes and small offices.

Immaġni: Quddiem view of the PIX Link LV-WR09 Wireless-N Repeater/Router/AP. The device is white, rectangular, and features four external antennas. On the front panel, there are several green LED indicator lights for power, Wi-Fi, LAN, and signal strength. A power plug is visible on the right side.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• 1 x PIX Link LV-WR09 Wireless-N Repeater/Router/AP
• 1 x Cable Ethernet
• 1 x Gwida ta 'Installazzjoni Mgħaġġla

Setup

Installazzjoni tal-Ħardwer

1. Qawwa Mixgħul: Plug the device into a standard electrical outlet. Ensure the Power LED illuminates.
2. Stenna għall-Inizjalizzazzjoni: Allow approximately 30-60 seconds for the device to boot up. The indicator lights will stabilize.

Modi ta 'Konfigurazzjoni

The LV-WR09 supports three operational modes:

• Modalità Ripetitur: Extends the range of an existing wireless network.
• Modalità Router: Creates a new private wireless network, typically connected to a modem.
• Modalità Punt ta' Aċċess (AP): Transforms a wired network connection into a wireless one.

Repeater Mode Setup (Recommended for Wi-Fi Extension)

1. Connect to Repeater's Wi-Fi: On your computer or mobile device, connect to the Wi-Fi network named "Wireless-N" or similar (no password required initially).
2. Aċċess Web UI: Iftaħ a web browser u daħħal 192.168.10.1 in the address bar. Press Enter.
3. Idħol: Daħħal l-isem tal-utent u l-password awtomatiċi (ġeneralment admin għat-tnejn).
4. Agħżel il-Modalità tar-Ripetitur: On the setup page, choose "Repeater Mode".
5. Skennja għal Netwerks: The device will scan for available Wi-Fi networks. Select your desired network from the list.
6. Daħħal il-Password: Input the Wi-Fi password for your selected network. You may also set a new SSID for the extended network if desired.
7. Applika s-Settings: Click "Apply" or "Save". The device will restart.
8. Ikkonnettja mill-ġdid: After restarting, connect your devices to the newly configured extended Wi-Fi network.

Setup tal-Modalità tar-router

1. Qabbad mal-Modem: Connect an Ethernet cable from your modem's LAN port to the LV-WR09's WAN/LAN port.
2. Qabbad mal-Wi-Fi tar-Router: Connect your computer or mobile device to the LV-WR09's default Wi-Fi network.
3. Aċċess Web UI: Iftaħ a web browser u daħħal 192.168.10.1. Login with default credentials.
4. Agħżel il-Modalità tar-Router: Choose "Router Mode" from the setup options.
5. Configure WAN Settings: Select your internet connection type (e.g., PPPoE, Dynamic IP, Static IP) and enter the required details provided by your ISP.
6. Configure Wireless Settings: Set your desired Wi-Fi network name (SSID) and password.
7. Applika s-Settings: Save the configuration. The device will restart.

AP Mode Setup

1. Connect to Wired Network: Connect an Ethernet cable from your existing router/switch's LAN port to the LV-WR09's WAN/LAN port.
2. Connect to AP's Wi-Fi: Connect your computer or mobile device to the LV-WR09's default Wi-Fi network.
3. Aċċess Web UI: Iftaħ a web browser u daħħal 192.168.10.1. Login with default credentials.
4. Agħżel il-Modalità AP: Choose "AP Mode" from the setup options.
5. Configure Wireless Settings: Set your desired Wi-Fi network name (SSID) and password.
6. Applika s-Settings: Save the configuration. The device will restart.

Tħaddem l-Apparat Tiegħek

Dwal Indikaturi

Understanding the LED indicators helps monitor the device's status:

Apparat li jgħaqqad

Once configured, you can connect your devices:

• Apparat bla fili: Fittex għal the Wi-Fi network name (SSID) you configured and enter the password.
• Apparati bil-fili: Connect devices like PCs, gaming consoles, or smart TVs to the LAN port(s) using an Ethernet cable.

Manutenzjoni

To ensure optimal performance and longevity of your device, consider the following maintenance tips:

• Aġġornamenti tal-Firmware: Iċċekkja perjodikament il-manifattur website for new firmware versions. Updating firmware can improve performance, add features, and fix bugs.
• Poġġiment ottimali: Place the device in a central location, away from obstructions (thick walls, metal objects) and sources of interference (microwaves, cordless phones).
• Tindif: Gently clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation holes are not blocked.
• Erġa' ibda Perjodikament: A periodic restart (unplugging and replugging after 10 seconds) can help clear temporary issues and refresh network connections.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

• Ebda Aċċess għall-Internet:
  • Iċċekkja jekk ir-router/modem prinċipali tiegħek għandux aċċess għall-internet.
  • Iċċekkja li l-kejbils kollha huma konnessi sew.
  • Restart the LV-WR09 and your main network equipment.
  • Re-check the configuration settings in the web UI, especially the Wi-Fi password if in Repeater mode.
• Weak Signal or Dead Zones Persist:
  • Relocate the LV-WR09 to a position halfway between your main router and the dead zone.
  • Aġġusta l-antenni għal riċezzjoni aħjar tas-sinjal.
  • Ensure there are no major physical obstructions.
• Ma nistax naċċessa Web Management Page (192.168.10.1):
  • Ensure your device is connected to the LV-WR09's Wi-Fi network or via Ethernet.
  • Neħħi l-cache tal-brawżer tiegħek jew ipprova brawżer ieħor.
  • Iddiżattiva temporanjament kwalunkwe firewall jew softwer antivirus.
  • If all else fails, perform a factory reset (see below).
• Forgot Login Password or Wi-Fi Password:
  • Irrisettjar tal-Fabbrika: With the device powered on, use a pin or paperclip to press and hold the Reset button (usually a small hole) for about 5-10 seconds until the lights flash. The device will revert to factory default settings, and you can reconfigure it.

Speċifikazzjonijiet Tekniċi

• Mudell: LV-WR09
• Standards bla fili: IEEE 802.11b/g/n
• Frekwenza: 2.4 GHz
• Rata tad-Data: Sa 300Mbps
• Antenni: 4 x Antenni Esterni
• Portijiet: 1 x 10/100Mbps WAN/LAN Port, 1 x 10/100Mbps LAN Port
• Sigurtà: WPA-PSK/WPA2-PSK, WPA/WPA2
• Provvista tal-Enerġija: AC 100-240V, 50/60Hz
• Modi Operattivi: Repeater, Router, AP

Garanzija u Appoġġ

This product comes with a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included in your package or contact the retailer where you purchased the device. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the manufacturer or your local distributor. Contact information can typically be found on the product packaging or the manufacturer's official websit.