1. Prodott Aktarview
The CANDY HOUSE SESAME FACE PRO is an advanced smart lock system offering multiple secure access methods. This device integrates face recognition, palm vein recognition, fingerprint scanning, IC card compatibility, and traditional PIN code entry to provide flexible and reliable security for your home or office.
Il-karatteristiċi ewlenin jinkludu:
- Metodi Multipli ta' Ftuħ: Face recognition, palm vein recognition, fingerprint, IC card (FeliCa, MIFARE, NFC compatible), and PIN code.
- Preċiżjoni Għolja: Designed for high precision with a false recognition rate of less than 0.0001%.
- Advanced Face Recognition: Functions effectively in low light conditions and accurately recognizes users with makeup or glasses. Resistant to photo or fake hand attempts.
- Extensive User Capacity: Supports up to 100 registered PIN codes, 100 fingerprints, and 1000 IC cards.
- Ġestjoni Faċli: Simple registration and deletion processes for all access methods.
Image 1.1: The SESAME FACE PRO smart lock shown with its accompanying smartphone application interface and a facial recognition mesh diagram.
2. Gwida ta' Setup
2.1 Kontenut tal-Pakkett
Qabel l-installazzjoni, ivverifika li l-komponenti kollha huma preżenti:
- SESAME FACE PRO Main Unit
- 3M Adhesive Tape (2 sets)
- Battery Cover (1 piece)
- Slide Cover (1 piece)
- CR123A 3.0V 1800mAh Batteries (2 pieces)
- Screws for Main Unit Shell (2 pieces, PM type 1.6x5.0mm)
- Screws for Battery Cover (2 pieces, PM type 2.0x9.0mm)
- Slide Cover Anti-Slip Screw (1 piece, M 1.4x4mm)
- Instruction Manual (1 copy)
- Karta tal-Garanzija (kopja 1)
2.2 Installazzjoni tal-batterija
The SESAME FACE PRO requires two CR123A lithium metal batteries. Ensure correct polarity when inserting.
- Remove the battery cover from the back of the main unit.
- Insert the two CR123A batteries according to the polarity markings.
- Replace the battery cover and secure it with the provided screws.
Image 2.1: Proper installation of CR123A batteries within the SESAME FACE PRO unit.
2.3 Immuntar tal-Apparat
The SESAME FACE PRO can be mounted using either the included 3M adhesive tape or screws, depending on your door surface and preference.
- Choose a suitable location on your door frame or wall adjacent to the door, ensuring it is within reach and at an appropriate height for face recognition.
- Clean the mounting surface thoroughly to ensure optimal adhesion if using tape.
- Attach the 3M tape to the back of the SESAME FACE PRO unit, or mark screw holes for drilling.
- Secure the unit firmly to the chosen surface.
Stampa 2.2: Quddiem view of the SESAME FACE PRO, highlighting its various sensors.
Immaġni 2.3: Proġett tal-ġenbfile of the SESAME FACE PRO, illustrating its compact design.
2.4 Initial Administrator Registration
Upon first use, you must register an administrator. This user will have privileges to add or remove other users and manage settings.
- Follow the on-screen prompts or refer to the quick start guide for administrator setup.
- Register your face, fingerprint, and a PIN code as the administrator.
3. Istruzzjonijiet Operattivi
3.1 Niftħu l-Bieb
The SESAME FACE PRO offers five methods for unlocking:
- Rikonoxximent tal-Wiċċ: Approach the device, and it will scan your face for recognition.
- Rikonoxximent tal-Vini tal-Palm: Present your palm to the sensor for vein pattern verification.
- Rikonoxximent tal-marki tas-swaba': Poġġi s-saba' rreġistrat tiegħek fuq is-senser tal-marki tas-swaba'.
- Kodiċi PIN: Enter your registered PIN code on the keypad.
- Karta IC: Tap a registered FeliCa, MIFARE, or NFC-compatible card (e.g., Suica, PASMO, Apple Watch, mobile Suica) to the card reader area.
Image 3.1: Face recognition in action, showing the device scanning a user's face.
Image 3.2: Palm vein recognition, demonstrating how to present your hand for scanning.
Image 3.3: Fingerprint recognition, showing a finger placed on the sensor.
Image 3.4: IC card recognition, illustrating a Suica card being used to unlock the device.
3.2 Issakkar il-Bieb
To lock the door, simply press the lock button on the keypad. The device will confirm the lock status.
3.3 Adding and Deleting Users
Only the administrator can add or delete users. Refer to the detailed instructions in the full manual for specific steps on managing user access for each recognition method.
- Kodiċi PIN: Up to 100 PIN codes can be registered.
- Marka tas-swaba ': Jistgħu jiġu rreġistrati sa 100 marka tas-swaba’.
- Karta IC: Up to 1000 IC cards can be registered.
4. Manutenzjoni
4.1 Sostituzzjoni tal-batterija
When the battery level is low, the device will provide an alert. Replace the CR123A batteries promptly to ensure continuous operation.
- Iftaħ il-kompartiment tal-batterija kif deskritt fit-Taqsima 2.2.
- Neħħi l-batteriji qodma.
- Insert new CR123A batteries, observing correct polarity.
- Agħlaq u waħħal il-qoxra tal-batterija.
4.2 Tindif
To maintain optimal performance, especially for the sensors, keep the device clean.
- Imsaħ il-wiċċ b'ċarruta ratba u niexfa.
- Avoid using abrasive cleaners or solvents that could damage the sensors or finish.
- Ensure the face recognition camera, palm vein sensor, and fingerprint sensor are free from dust and smudges.
Image 4.1: The SESAME FACE PRO is designed with a degree of water resistance for outdoor use.
5 Issolvi l-problemi
If you encounter issues with your SESAME FACE PRO, try the following common solutions:
- Falliment fir-Rikonoxximent: Ensure the sensors are clean and free from obstructions. Re-register your face, palm, or fingerprint if recognition consistently fails. Ensure adequate lighting for face recognition, though the device is designed for low light.
- L-apparat ma jirrispondix: Check battery levels and replace if necessary. If the device remains unresponsive, perform a factory reset (refer to the full manual for instructions).
- Il-Kodiċi PIN Mhux Jaħdem: Double-check the entered PIN. Ensure the keypad is clean and responsive.
- IC Card Not Detected: Ensure the card is compatible (FeliCa, MIFARE, NFC) and placed correctly on the reader. Re-register the card if needed.
Għal problemi persistenti, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
6. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | KAMRA TAL-KANJU |
| Numru tal-Mudell | 860013658205 |
| Dimensjonijiet tal-Prodott (LxWxH) | 2.81 x 4.76 x 9 ċm (1.1 x 1.87 x 3.54 pulzieri) |
| Piż tal-Prodott | 250 g (0.55 lbs) |
| Kulur | Iswed |
| Sors tal-Enerġija | 2 x CR123A Lithium Metal Batteries |
| Nisfruttaw Metodi | Face Recognition, Palm Vein Recognition, Fingerprint, PIN Code, IC Card (FeliCa, MIFARE, NFC) |
| Kapaċità tal-Kodiċi PIN | Sa 100 |
| Kapaċità tal-marki tas-swaba' | Sa 100 |
| Kapaċità tal-Kard IC | Sa 1000 |
| Aċċessorji Inklużi | 3M Tape (2 sets), Battery Cover, Slide Cover, CR123A Batteries (2), Main Unit Screws, Battery Cover Screws, Slide Cover Anti-Slip Screw, Instruction Manual, Warranty Card |
Image 6.1: Detailed dimensions of the SESAME FACE PRO unit.
7. Garanzija u Appoġġ
7.1 Informazzjoni dwar Garanzija
The CANDY HOUSE SESAME FACE PRO comes with a standard manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
7.2 Appoġġ għall-Klijent
For technical assistance, troubleshooting, or any questions regarding your SESAME FACE PRO, please contact CANDY HOUSE customer support. Contact details can typically be found on the official CANDY HOUSE webis-sit jew fuq il-karta tal-garanzija pprovduta mal-prodott tiegħek.