Informazzjoni Importanti dwar is-Sigurtà
Read all instructions carefully before using the appliance. Retain this manual for future reference.
- Always disconnect the vacuum cleaner from the power supply before cleaning or performing maintenance.
- Tiġborx materjali fjammabbli jew kombustibbli, irmied jaħraq, jew oġġetti kbar u li jaqtgħu.
- Do not immerse the motor head in water or other liquids.
- Ensure all filters are correctly installed before operation.
- Dan l-apparat huwa għal użu domestiku biss.
Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha huma preżenti fl-imballaġġ:
- 1x Hoover Wet & Dry vacuum cleaner
- 1x Flexi hose and tube attachment
- 1x 2-in-1 Crevice tool
- 1x Pinzell tal-art
- 1x Manwal ta 'struzzjonijiet
All components included with the Hoover HWD21 Wet Dry Drum Vacuum.
Assemblaġġ u Setup
- Spakkjar: Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
- Attaching Castor Wheels: Invert the tank and firmly push the castor wheels into their designated slots on the base. Ensure they click into place.
Ensure castor wheels are securely attached for mobility.
- Konnessjoni tal-Manka: Insert the flexible hose into the suction inlet on the front of the vacuum cleaner until it is secure. For the blower function, connect the hose to the exhaust outlet.
- Twaħħil ta' Tubi ta' Estensjoni u Żennuni: Connect the desired extension tubes to the hose, then attach the appropriate nozzle (e.g., floor brush, crevice tool) for your cleaning task.
Istruzzjonijiet Operattivi
Tixgħel/Jitfi
Plug the power cord into a suitable electrical outlet. Press the green "ON" button to start the vacuum and the red "OFF" button to stop it.
Location of the power ON (green) and OFF (red) buttons.
Vakwu xott
For dry vacuuming, ensure the dry filter is correctly installed inside the tank. Attach the floor brush or crevice tool as needed. Move the nozzle over the dry debris to collect it.
The floor brush attachment effectively cleans dry debris from hard surfaces.
Vakwu bil-Wet
For wet vacuuming, remove the dry filter. Attach the appropriate wet nozzle (if different from dry, or use the floor brush without the brush insert). Carefully vacuum liquid spills. Do not overfill the tank; the float mechanism will stop suction when full.
The vacuum efficiently handles liquid spills on various surfaces.
Funzjoni tal-blower
To use the blower function, detach the hose from the suction inlet and connect it to the exhaust outlet located on the motor head. Turn on the vacuum to use it as a blower for clearing debris from pathways or hard-to-reach areas.
The blower function helps clear debris from surfaces.
Użu ta 'Annessi
- Multi-surface Floor Nozzle: Ideal for general cleaning on both hard floors and carpets.
- Għodda ta' Xquq 2-in-1: Use the narrow end for tight spaces and corners. Slide the brush attachment forward for dusting delicate surfaces or upholstery.
The crevice tool with brush is suitable for cleaning upholstery and tight areas.
Manutenzjoni
Tbattil tat-Tank
After each use, especially after wet vacuuming, unplug the unit and unclip the motor head. Carefully lift the motor head and dispose of the collected debris or liquid. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly.
Tindif Filtri
- Filtru Niexef: For dry vacuuming, regularly check and clean the dry filter. Tap it gently to remove dust or rinse with water if heavily soiled. Ensure it is completely dry before re-installing.
- Filtru tal-Fowm (għal użu mxarrab): If a foam filter is used for wet vacuuming, rinse it with water and allow it to air dry completely before storage or next use.
Tindif u Ħażna Ġenerali
Imsaħ il-barra tal-vacuum cleaner b'adamp cloth. Do not use abrasive cleaners. Store the vacuum and its accessories in a dry place, away from direct sunlight and extreme temperatures. Utilize the onboard accessory storage for convenience.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-vacuum cleaner ma jixgħelx. | L-ebda provvista tal-enerġija; il-korda tal-enerġija mhux imdaħħla; il-buttuna tal-enerġija mhux ippressata. | Check power outlet; ensure cord is securely plugged in; press the green "ON" button. |
| Telf ta 'ġbid. | Hose or nozzle blocked; tank full; filter clogged; hose not securely attached. | Check and clear blockages; empty the tank; clean or replace filter; ensure hose is firmly connected. |
| Tnixxija ta' ilma waqt it-tindif bil-vacuum cleaner bl-imxarrab. | Tank overfilled; seals not properly seated. | Empty the tank; check and re-seat the motor head and any seals. |
| Storbju mhux tas-soltu waqt it-tħaddim. | Blockage in hose or nozzle; motor issue. | Iċċekkja għal u neħħi l-imblukkar. Jekk l-istorbju jippersisti, ikkuntattja l-appoġġ għall-klijenti. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Hoover |
| Numru tal-Mudell | HWD21 |
| Sors tal-Enerġija | Corded Elettriku |
| Qawwa tal-Mutur | 1200W |
| Kapaċità tat-Tank | 20 Litri |
| Materjal tat-Tank | Stainless Steel |
| Tul tal-kurdun | 5m |
| Rakkomandazzjoni tal-wiċċ | L-artijiet kollha |
| Kulur | Iswed u Fidda |
| Komponenti Inklużi | Vacuum cleaner, Flexi hose, Extension tube, 2-in-1 Crevice tool, Floor brush, Instruction manual |
Garanzija u Appoġġ
This Hoover HWD21 Stainless Steel 20L Wet Dry Drum Vacuum comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, spare parts, or warranty claims, please contact Hoover customer service through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fid-dokumentazzjoni tal-garanzija tiegħek.
Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal skopijiet ta' garanzija.