Prodott Overview
This manual provides instructions for the replacement remote control for specific Richmat adjustable bed base control boxes. This remote is designed to replace lost or damaged original remotes and is compatible with the model for Richmat HJC25 ML150 127780C250033.
Figura 1: Quddiem view of the replacement remote control. It features dedicated buttons for adjusting head and foot positions, as well as a 'FLAT' button to return the bed to a flat position.
Important Compatibility Note
This remote control is specifically designed to work with the Richmat HJC25 ML150 127780C250033 control box. It is crucial to verify your existing control box model number to ensure compatibility. This remote is mhux kompatibbli with OKIN Control boxes or other models not explicitly listed.
Before attempting to pair, ensure your old remote is identical in button layout and functionality to the replacement remote. If you are unsure about compatibility, it is recommended to provide detailed information about your bed, control box, and old remote control to the supplier for verification.
Figure 2: Visual guide for identifying your control box and old remote for compatibility verification. This image highlights the importance of matching the control box model and the appearance of your previous remote.
Istruzzjonijiet ta' Setup u Tqabbil
The replacement remote requires 2 AAA batteries (not included). Please install them before proceeding with the pairing process.
Figura 3: Wara view of the remote control, illustrating the battery compartment. Ensure 2 AAA batteries are correctly inserted according to polarity markings.
Metodu ta' Tqabbil:
- Pass 1: On the remote, press and hold the "head up" button and the "foot up" button simultaneously for 10 seconds.
- Pass 2: Locate the control box underneath your adjustable bed. Push the button on the side of the control box that indicates "Learn" or "Reset Coding". Do not press and hold this button; simply press and release it quickly.
- Pass 3: Once you hear beeps, this indicates that the remote has successfully synced with the control box.
It is recommended to refer to the original user manual for your adjustable bed base for any specific pairing instructions or additional details unique to your bed model.
Istruzzjonijiet Operattivi
Once successfully paired, the remote control allows you to adjust the positions of your adjustable bed base. The remote features the following primary functions:
- Ras 'il fuq/'l isfel: Buttons with a person icon showing the upper body raised or lowered. Press to raise or lower the head section of the bed.
- Sieq 'il fuq/'l isfel: Buttons with a person icon showing the lower body raised or lowered. Press to raise or lower the foot section of the bed.
- ĊATT: A central button labeled "FLAT". Press this button to return both the head and foot sections of the bed to a completely flat position.
For advanced features or specific preset positions, please consult the original manual provided with your adjustable bed base, as this remote is a replacement for basic functionality.
Manutenzjoni
Biex tiżgura prestazzjoni ottimali u lonġevità tal-kontroll remot tiegħek:
- Sostituzzjoni tal-batterija: The remote requires 2 AAA batteries. Replace batteries when the remote's response becomes sluggish or stops working. Always use new, good quality batteries.
- Tindif: Imsaħ ir-remote b'ċarruta ratba u niexfa. Evita li tuża prodotti tat-tindif likwidi jew materjali li joborxu.
- Ħażna: Aħżen ir-remote f'post niexef, 'il bogħod minn temperaturi estremi u dawl tax-xemx dirett.
Issolvi l-problemi
If you encounter issues with your replacement remote control, please refer to the following common solutions:
- Remote Mhux Jirrispondi:
- Iċċekkja jekk il-batteriji humiex imdaħħla sew u għandhomx biżżejjed ċarġ. Ibdelhom jekk meħtieġ.
- Ensure there are no obstructions between the remote and the bed's control box.
- Re-attempt the pairing process as described in the "Setup and Pairing Instructions" section.
- Funzjonalità Mhux Korretta:
- Verify that the remote model is indeed compatible with your specific Richmat control box model (for Richmat HJC25 ML150 127780C250033).
- Confirm that your old remote had an identical button layout and functions.
- Remote Does Not Pair:
- Ensure you are pressing and holding the correct buttons on the remote for 10 seconds (head up + foot up).
- Make sure you are pressing and relayasing the "Learn" or "Reset Coding" button on the control box, not holding it down.
- Check the original bed base manual for any alternative pairing methods or specific requirements.
If the issue persists after following these steps, please contact customer support with detailed information about your bed, control box, and the remote.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | for Richmat HJC25 ML150 127780C250033 |
| Kaxxa ta' Kontroll Kompatibbli | Richmat HJC25 ML150 127780C250033 (also compatible with NL200U 127780C180169 as per product features) |
| Sors tal-Enerġija | 2 x Batteriji AAA (mhux inklużi) |
| Kulur | Iswed |
| Numru Massimu ta' Apparat Appoġġjat | 1 |
| Apparati Kompatibbli | Adjustable bed base |
| Manifattur | SZHKHXD |
Garanzija u Appoġġ
This product is a replacement part. For specific warranty information, please refer to the original purchase terms or contact the seller directly. No explicit warranty information is provided with this replacement remote.
Appoġġ għall-Klijent:
If you require further assistance, have questions regarding compatibility, or encounter issues not covered in the troubleshooting section, please contact the supplier. When contacting support, be prepared to provide:
- Detailed information about your adjustable bed base (brand, model).
- The model number of your existing control box.
- Pictures of your old remote control (front and back) and the control box label.
- Deskrizzjoni tal-kwistjoni li qed tesperjenza.
Providing this information will help expedite the support process and ensure accurate assistance.
