Generic Replacement Kit for Xiaomi S20/S20+ Robot Vacuum Cleaner (B108GL)

1. Prodott Aktarview

This replacement kit provides essential components to maintain the cleaning efficiency of your Xiaomi S20, S20+, or B108GL robot vacuum cleaner. Regular replacement of these parts ensures optimal performance and extends the lifespan of your device.

Kompatibilità

This kit is specifically designed for and compatible with the following robot vacuum cleaner models:

• Xiaomi Robot Vacuum S20+
• Xiaomi Robot Vacuum S20 Plus
• Xiaomi Robot Vacuum B108GL

Image: Robot vacuum cleaners illustrating compatibility with S20+, S20 Plus, and B108GL models.

Kontenut tal-Kit

Il-kit jinkludi l-komponenti li ġejjin:

• Main Roller Brushes: 2-il biċċa
• Xkupilji tal-ġenb: 6-il biċċa
• Filtri HEPA: 6-il biċċa
• Ċraret tal-mopp: 6-il biċċa

Image: Visual representation of the complete replacement kit contents.

2. Gwida għall-Installazzjoni

Before installing any replacement parts, ensure your robot vacuum cleaner is powered off and disconnected from its charging base. Refer to your robot vacuum's original manual for specific instructions on accessing component compartments.

2.1 Installazzjoni tal-Pinzell tar-Romblu Prinċipali

1. Dawwar il-vacuum cleaner robot ta’ taħt fuq.
2. Sib l-għatu tal-pinzell prinċipali, ġeneralment imwaħħal b'lukketti jew viti. Iftaħ jew neħħih.
3. Neħħi l-pinzell prinċipali l-qadim.
4. Insert the new main roller brush into its slot, ensuring the ends align correctly with the brush bearings.
5. Close or re-secure the main brush cover.

Image: Main roller brush, designed for efficient dust removal and deep cleaning.

2.2 Installazzjoni tal-Pinzell tal-Ġenb

1. Dawwar il-vacuum cleaner robot ta’ taħt fuq.
2. Locate the side brushes. They are typically held in place by a single screw or snap into position.
3. Remove the old side brush. If secured by a screw, unscrew it.
4. Align the new side brush with the post on the vacuum's underside and press it firmly or secure it with the screw.

Image: Side brushes, effective for cleaning corners and crevices.

2.3 Installazzjoni tal-Filtru HEPA

1. Iftaħ il-kompartiment tal-kontenitur tat-trab tal-vacuum cleaner robot tiegħek.
2. Neħħi l-dustbin.
3. Locate the filter housing within the dustbin. Remove the old filter.
4. Insert the new HEPA filter into the dustbin, ensuring it is seated correctly to create a tight seal.
5. Reinstall the dustbin into the robot vacuum.

Image: HEPA filters, capable of capturing fine particles and washable for reuse.

2.4 Mop Cloth Installation

1. Locate the mop pad attachment on your robot vacuum. This is typically on the underside or a removable water tank.
2. Remove the old mop cloth.
3. Attach the new mop cloth to the designated area, ensuring it is securely fastened (e.g., via Velcro or clips).

Image: Microfiber mop cloth, designed for effective and uniform floor cleaning.

3. Frekwenza tal-Manutenzjoni u s-Sostituzzjoni

Regular maintenance and timely replacement of these components are crucial for your robot vacuum's performance and longevity. The frequency of replacement depends on usage, pet presence, and environmental factors.

3.1 Main Roller Brush

• Tindif: Remove hair and debris from the brush and its ends weekly. The main brush is removable for easier cleaning.
• Sostituzzjoni: Replace every 3-6 months, or when bristles show significant wear or damage.

3.2 Xkupilji tal-Ġnub

• Tindif: Check for tangled hair and debris weekly.
• Sostituzzjoni: Replace every 3-6 months, or if bristles are bent, broken, or worn, as this affects edge cleaning.

3.3 Filtri HEPA

• Tindif: Tap out dust from the filter over a trash can after each cleaning cycle. Some filters can be gently rinsed with water; ensure they are completely air-dried before reinstallation.
• Sostituzzjoni: Replace every 1-3 months, depending on usage and air quality. A clogged filter reduces suction power and air quality.

3.4 Ċraret tal-Mopp

• Tindif: Wash the mop cloth after each use. It can be hand-washed or machine-washed with similar colors.
• Sostituzzjoni: Replace every 1-3 months, or when the cloth shows signs of wear, reduced absorbency, or persistent staining.

4 Issolvi l-problemi

Jekk tiltaqa' ma' problemi wara li tissostitwixxi l-partijiet, ikkunsidra dan li ġej:

• Il-partijiet ma jaqblux: Double-check the compatibility of the kit with your specific Xiaomi robot vacuum model (S20, S20+, B108GL). Ensure all parts are correctly oriented and fully seated in their respective compartments. Some components may require a firm but gentle push to snap into place.
• Prestazzjoni mnaqqsa tat-tindif: Ensure all brushes are free of tangles and debris. Verify that the HEPA filter is clean and correctly installed, as a misaligned or clogged filter can reduce suction.
• Ħsejjes mhux tas-soltu: Check main and side brushes for any foreign objects or hair tangles that might be causing obstruction. Ensure brushes are installed correctly and not rubbing against other parts.
• Mop not cleaning effectively: Ensure the mop cloth is clean and properly attached. Check the water tank (if applicable to your model) for sufficient water and proper flow.

If problems persist, consult your robot vacuum cleaner's original user manual or contact the robot vacuum manufacturer's support.

5. Speċifikazzjonijiet

6. Garanzija u Appoġġ

As a generic replacement kit, specific warranty information may vary. Please refer to the retailer's return policy for details regarding returns or exchanges.

For operational issues related to your Xiaomi robot vacuum cleaner itself, please consult the original manufacturer's documentation or customer support channels.