SCULPFUN TS1 Touch Screen Laser Engraver Controller User Manual

1. Introduzzjoni

The SCULPFUN TS1 is a 3.5-inch capacitive touch screen controller designed to enhance the functionality of your laser engraver. It enables offline engraving by allowing you to store and execute engraving files directly from an SD card, eliminating the need for a constant computer connection. Additionally, it supports WiFi connectivity for real-time slicing and control via the SCULPFUN mobile application, offering a flexible and convenient engraving experience. The TS1 is compatible with a wide range of SCULPFUN laser engravers and other models that support GRBL firmware.

2. Kontenut tal-Pakkett

Before beginning, please verify that all items listed below are included in your package:

• 1x SCULPFUN TS1 Touch Screen
• 1x Kejbil tal-Enerġija
• 1x SD Card (512MB)
• 1x Qarrej tal-Kard
• 1x Manwal għall-Utent

Figure 2.1: SCULPFUN TS1 Touch Screen and its accessories.

3. Gwida ta' Setup

3.1 Konnessjonijiet Fiżiċi

1. Connect to Laser Engraver: Use the provided USB cable to connect the SCULPFUN TS1 Touch Screen to your laser engraver's USB port.
2. Konnessjoni tal-Enerġija: Connect the power cable to the TS1's power input port. The device is compatible with 12V and 24V power sources.
3. Daħħal SD Card: Insert the included 512MB SD card into the designated SD card slot on the TS1. This card is used for storing engraving files for offline operation.

Figure 3.1: Connecting the TS1 to a laser engraver and smartphone.

Figure 3.2: TS1 port overview u dimensjonijiet.

3.2 Qawwa Inizjali

Press the power button on the TS1 to turn on the device. The 3.5-inch capacitive touch screen will display the main interface.

Figure 3.3: The sensitive capacitive touch screen of the TS1.

4. Istruzzjonijiet Operattivi

4.1 Inċiżjoni Offline

The TS1 allows you to perform engraving tasks without a computer connection by using an SD card.

1. Prepare GCode File: Using software like LightBurn or LaserGRBL on your computer, export your engraving design as a GCode file.
2. Transfer to SD Card: Insert the provided card reader into your computer and the SD card into the card reader. Copy the GCode file għall-karta SD.
3. Insert SD Card into TS1: Remove the SD card from the card reader and insert it into the TS1's SD card slot.
4. Select and Engrave: On the TS1 touch screen, navigate to the 'Carving' menu. Select your GCode file from the list and press 'Start' to begin the engraving process.

Figure 4.1: Transferring GCode files to the SD card for offline engraving.

4.2 WiFi Connection and Mobile App Control

The TS1 can connect to WiFi, enabling control and real-time slicing functions through the SCULPFUN mobile application.

1. Enable WiFi: On the TS1 touch screen, go to the 'Set Up' menu and enable the WiFi function. Connect to your desired network.
2. Download SCULPFUN APP: Download and install the official SCULPFUN mobile application on your smartphone.
3. Connect App to TS1: Open the SCULPFUN APP and follow the on-screen instructions to connect to your TS1 device via WiFi.
4. Real-time Slicing and Control: Once connected, you can use the app for real-time slicing of designs and to control your laser engraver directly from your smartphone.

Figure 4.2: TS1 WiFi functionality and app integration.

Figure 4.3: TS1 wide compatibility with laser engravers.

4.3 User Interface and Language Settings

The TS1 features an intuitive user interface with support for multiple languages.

1. Navigazzjoni: Use the capacitive touch screen to navigate through menus such as 'Control', 'Carving', and 'Set Up'.
2. Għażla tal-Lingwa: In the 'Set Up' menu, select 'Language' to choose from available languages including English, Deutsch, Français, Italiano, Español, and Polski.

Figure 4.4: Multi-language support on the TS1 interface.

4.4 Dimostrazzjoni bil-Vidjo

5. Manutenzjoni

To ensure the longevity and optimal performance of your SCULPFUN TS1 Touch Screen, follow these maintenance guidelines:

• Tindif: Gently wipe the screen and exterior with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents that could damage the surface.
• Ħażna: Aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Kura tal-Kard SD: Handle the SD card carefully to prevent data corruption. Always safely eject the card from your computer before removing it.

6 Issolvi l-problemi

If you encounter issues with your SCULPFUN TS1, refer to the following common problems and solutions:

• L-Apparat Mhux Jixgħel:
  Ensure the power cable is securely connected to both the TS1 and a working power outlet. Verify the power source is providing the correct voltage (12V jew 24V).
• Laser Engraver Not Responding:
  Check the USB connection between the TS1 and the laser engraver. Ensure the engraver is powered on and properly configured. Verify that the GCode file on the SD card is valid and compatible with your engraver.
• Kwistjonijiet ta' Konnessjoni WiFi:
  Confirm that the TS1 is within range of your WiFi router. Double-check the WiFi password. If issues persist, try restarting both the TS1 and your router.
• SD Card Mhux Rikonoxxuta:
  Ensure the SD card is fully inserted into the slot. Try reinserting the card or using a different compatible SD card. Verify the GCode files are correctly formatted.

For further assistance, please contact SCULPFUN customer support.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

SCULPFUN products are designed for reliability and performance. For warranty information and customer support, please refer to the official SCULPFUN webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

For technical assistance or inquiries, please visit the SCULPFUN Store on Amazon jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament.