JZK Voice Remote Control for NVIDIA Shield TV Pro

JZK Voice Remote Control for NVIDIA Shield TV Pro User Manual

Compatible with NVIDIA Shield TV 2015, 2017, and 2019 Models

Introduzzjoni

This manual provides detailed instructions for the JZK Voice Remote Control, designed as a replacement or secondary remote for NVIDIA Shield TV Pro models from 2015, 2017, and 2019. This remote features voice search capabilities and an ergonomic design for comfortable use. Please read this manual thoroughly before operating your device.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

  • 1 x JZK Voice Remote Control
  • 1 x Gwida għall-Utent (Dan id-dokument)

Note: 2x AAA batteries are required and are not included in the package.

Package contents showing the JZK remote control and a small instruction guide.

Image: Contents of the JZK remote control package, including the remote and a small user guide.

Setup

1. Installazzjoni tal-batterija

  1. Sib il-kompartiment tal-batterija fuq wara tal-kontroll remot.
  2. Żerżaq l-għatu tal-batterija 'l isfel biex tiftaħha.
  3. Daħħal żewġ (2) batteriji AAA, waqt li tiżgura l-polarità korretta (+ u -) kif indikat ġewwa l-kompartiment.
  4. Żerġa l-għatu tal-batterija fil-post sakemm tikklikkja sew.
Open battery compartment of the JZK remote control, showing slots for two AAA batteries.

Image: The remote control with its battery cover removed, illustrating where to insert two AAA batteries.

2. Tqabbil tal-Kontroll mill-bogħod

The remote control uses an infrared connection. For initial setup or re-pairing, follow these steps:

  1. Ensure your NVIDIA Shield TV is powered on and within 1 foot (approx. 30 cm) of the remote control.
  2. On your NVIDIA Shield TV, navigate to Settings > Device Preferences > Remotes & Accessories.
  3. Agħfas u żomm il- Lura buttuna u l- Dar button simultaneously on the JZK remote control until the remote's indicator light begins to flash.
  4. The NVIDIA Shield TV should detect the new remote. Select it from the list of available devices to complete the pairing process.
  5. Once paired, the remote's light will stop flashing, and you can begin using it.

If pairing fails, ensure the batteries are correctly installed and charged, and try the process again. You may also need to restart your NVIDIA Shield TV.

Istruzzjonijiet Operattivi

Iffamiljarizza ruħek mal-buttuni u l-funzjonijiet tagħhom:

Diagram of the JZK remote control with numbered buttons and their corresponding functions.

Image: Detailed button layout of the JZK remote control with labels for each function.

Funzjonijiet tal-buttuna tal-kontroll mill-bogħod
Nru.ButtunaFunzjoni
1Mikrofonu inkorporatUsed for Voice Search commands.
2QawwaTurns the NVIDIA Shield TV on or off.
3SettingsAccesses the NVIDIA Shield TV settings menu. (Customizable in Settings > Devices & Accessories > Customize Settings button)
4Ċirku tan-NavigazzjoniNavigates menus: Up, Down, Right, Left.
5Select (OK)Confirms selections or opens items.
6LuraTerġa' lura għall-iskrin jew il-menu preċedenti.
7DarJirritorna għall-iskrin prinċipali tad-dar.
8Fast-ForwardSkips forward in media playback.
9Play/PawsaJilgħab jew iwaqqaf il-plejbek tal-midja.
10RewindSkips backward in media playback.
11Tiftix bil-VuċiActivates voice command input. Press and hold, then speak your command.
12Żid il-VolumIżżid il-volum.
13Naqqas il-VolumTnaqqas il-volum.
14Iftaħ NetflixDirectly launches the Netflix application.

Using Voice Search

The voice search feature allows for quick navigation and content discovery. To use it:

  1. Agħfas u żomm il- Tiftix bil-Vuċi buttuna (11).
  2. Speak your command clearly into the built-in microphone (1). For example, say "Open YouTube," "Find action movies," or "Adjust volume."
  3. Irrilaxxa l- Tiftix bil-Vuċi agħfas il-buttuna meta tkun lestejt titkellem.

Manutenzjoni

Tindif tal-Bogħod

Biex tnaddaf il-kontroll remot, uża drapp artab u niexef. Għal ħmieġ iebes, nixxef ftit.ampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or solvents, as these can damage the remote's surface or internal components.

Sostituzzjoni tal-batterija

When the remote's performance degrades or it becomes unresponsive, it's time to replace the batteries. Follow the battery installation steps outlined in the Setup section. Always replace both AAA batteries at the same time with new ones.

Issolvi l-problemi

If you encounter issues with your JZK Voice Remote Control, refer to the following common problems and solutions:

ProblemaKawża PossibbliSoluzzjoni
Il-kontroll remot ma jirrispondix.Low or dead batteries. Incorrect battery installation. Remote not paired. Obstruction between remote and Shield TV.Replace batteries. Check battery polarity. Re-pair the remote (see Setup section). Ensure clear line of sight to Shield TV.
Voice Search not working.Microphone blocked. Remote not properly paired for voice functions. Software glitch.Ensure microphone is clear. Re-pair the remote. Restart NVIDIA Shield TV.
Buttons are sticky or not registering presses.Ħmieġ jew debris taħt il-buttuni.Clean the remote (see Maintenance section).
Il-bogħod jiskonnettja ta' spiss.Interference. Low batteries.Ensure no strong interference sources nearby. Replace batteries. Re-pair the remote.

Speċifikazzjonijiet

KaratteristikaDettall
BrandJZK
Kompatibilità tal-MudellNVIDIA Shield TV Pro (2015, 2017, 2019 models), NVIDIA Shield TV Cube (2019)
Tip ta' KonnessjoniInfra-aħmar (IR)
Sors tal-Enerġija2 x Batteriji Alkalini AAA (mhux inklużi)
Karatteristiċi SpeċjaliVoice Search, Ergonomic Design, Dedicated Netflix Button
MaterjalABS durabbli
KulurIswed / Abjad
Dimensjonijiet (L x W x H)Madwar 16.8 x 6 x 2.6 ċm (6.6 x 2.4 x 1.0 pulzieri)
PiżMadwar 60 gramma (2.1 uqija)
Image showing the dimensions of the JZK remote control: 14cm length, 4cm width, 1.8cm thickness.

Image: Dimensions of the JZK remote control, indicating its length, width, and thickness.

A hand holding the JZK remote control, demonstrating its ergonomic design.

Image: The JZK remote control held in a hand, highlighting its comfortable and ergonomic design.

Informazzjoni dwar Garanzija

Specific warranty details for this JZK product are not provided in the product description. Please refer to the retailer's return policy or contact JZK customer support for information regarding warranty coverage and terms.

Appoġġ

For further assistance, troubleshooting, or inquiries about your JZK Voice Remote Control, please contact the retailer where you purchased the product or refer to the official JZK website for customer support options.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.