1. Istruzzjonijiet tas-Sigurtà
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Sigurtà Elettrika: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply before installation, maintenance, or repair.
- Voltage: This product operates on AC 85V-265V. Ensure your power supply matches this requirement.
- Reżistenza għall-Ilma: The light fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use, avoid submerging it in water.
- Għoli tal-Installazzjoni: For optimal motion detection, install the light at a height of approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).
- Temperatura operattiva: Ensure the operating environment is within the specified temperature range to prevent damage.
2. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- DELIPOP LED Wall Light (2 units)
- Ħardwer tal-Immuntar (viti, ankri tal-ħajt)
- Manwal ta' Istruzzjoni
3. Karatteristiċi tal-prodott
- Sensorju tal-Mozzjoni Integrat: Detects movement within 3 to 8 meters (10 to 26 feet) at a 120° angle.
- Operazzjoni Awtomatika: Light turns on automatically at night when motion is detected and turns off approximately 15 seconds after no motion is detected.
- LED Effiċjenti fl-Enerġija: 24W power consumption with a long lifespan of over 50,000 hours.
- Illuminazzjoni bajda sħuna: 3000K color temperature for a comfortable and inviting ambiance.
- Kostruzzjoni Durabbli: Made from die-cast aluminum alloy body and PC lampshade, resistant to rust, yellowing, high temperatures, and impacts.
- IP65 li ma jgħaddix ilma minnha: Designed for outdoor use, resistant to various weather conditions.
Figure 3.1: Product dimensions and key components including high-quality LED chip, die-cast aluminum lamp body, and PIR motion sensor.
4. Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Brand | DELIPOP |
| Mudell | 24W LED Wall Light with Motion Sensor |
| Dimensjonijiet (L x W x H) | 29 x 10 x 9 ċm (11.41 x 3.93 x 3.54 pulzieri) |
| Piż | 1.8 Kilograms (per unit, for 2 units) |
| Voltage | AC 85V-265V |
| Qawwa | 24 Watts |
| Fluss Luminuż | 2370 Lumens |
| Temperatura tal-Kulur | 3000K Abjad Saħħan |
| Materjal | Aluminju, Polikarbonat (PC) |
| Klassifikazzjoni li ma jgħaddix ilma minnha | IP65 |
| Angolu tas-Sensor tal-Mozzjoni | 120° |
| Medda tas-Sensor tal-Moviment | 3-8 metru (10-26 pied) |
| Dewmien għat-tifi awtomatiku | Approx. 15 seconds (after no motion) |
| It-tul tal-ħajja | > 50,000 siegħa |
| Klassi tal-Effiċjenza tal-Enerġija | E |
Figure 4.1: EU Energy Efficiency Label for the DELIPOP light. For more details, refer to the Bażi tad-dejta tal-EPREL (link bil-kodiċi QR).
5. Gwida għall-Installazzjoni
Importanti: Always ensure the main power supply is turned off before starting installation. It is recommended to have this product installed by a professional electrician.
- Ipprepara ż-Żona tal-Installazzjoni: Choose a suitable wall location, ideally between 1.8 to 2.5 meters (5.9 to 8.2 feet) high, for optimal motion sensor performance. Ensure the surface is clean and stable.
- Immarka l-Punti tat-Tħaffir: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the wall.
- Drill toqob: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
- Qabbad il-Wiring: Carefully connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Use appropriate wire connectors and ensure all connections are secure and insulated.
- Immonta l-Apparat: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached and stable.
- Irrestawra l-Enerġija: Once installation is complete and all connections are secure, turn the main power supply back on.
Figura 5.1: Eżample of the DELIPOP wall light installed on an exterior wall.
6. Istruzzjonijiet Operattivi
The DELIPOP LED wall light features an integrated motion sensor for automatic operation.
- Operazzjoni bi nhar: During daylight hours, the light will remain off to conserve energy, even if motion is detected.
- Operazzjoni bil-lejl: When it is dark, the motion sensor becomes active. If motion is detected within its 3-8 meter range and 120° angle, the light will automatically turn on.
- Tifi awtomatiku: The light will remain on as long as continuous motion is detected. Approximately 15 seconds after no motion is detected, the light will automatically turn off.
Figure 6.1: Visual representation of the motion sensor's operational cycle, including daytime standby, nighttime activation, and automatic deactivation.
7. Kura u Manutenzjoni
Regular cleaning and proper care will ensure the longevity and optimal performance of your DELIPOP wall light.
- Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Imsaħ l-apparat b'ċarruta ratba u nadifa.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or components.
- Spezzjoni: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
- LEDs: The integrated LED light source is designed for a long lifespan and is not user-replaceable.
Figure 7.1: The DELIPOP wall light is designed to be IP65 waterproof and resistant to cold weather conditions.
8 Issolvi l-problemi
If you encounter issues with your DELIPOP wall light, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx bil-lejl. | 1. L-ebda provvista ta 'enerġija. 2. Sensor obstructed or faulty. 3. Still too bright (daylight sensor active). | 1. Check power connections and circuit breaker. 2. Ensure sensor is clean and unobstructed. Test sensor by waving hand. 3. Wait until it is sufficiently dark. |
| Id-dawl jibqa' mixgħul kontinwament. | 1. Continuous motion detected. 2. Sensor faulty. | 1. Ensure no constant movement (e.g., swaying branches, pets) is within sensor range. 2. Contact customer support if problem persists after checking for motion. |
| Id-dawl teptip jew jitbaxxa. | 1. Provvista ta 'enerġija instabbli. 2. Konnessjoni tal-wajers maħlula. | 1. Consult an electrician to check power stability. 2. Turn off power and check all wiring connections. Re-secure if loose. |
9. Garanzija u Appoġġ
DELIPOP is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LED wall light, please contact DELIPOP customer service through your purchase platform.
Jekk jogħġbok irreferi għad-dokumentazzjoni tax-xiri tiegħek għat-termini u l-kundizzjonijiet speċifiċi tal-garanzija.