HPBS 5000A Tire Inflator & 3000A Car Jump Starter User Manual

Introduzzjoni

Thank you for choosing the HPBS 5000A Tire Inflator and 3000A Car Jump Starter. This comprehensive device is designed to provide reliable roadside assistance for various vehicles, combining the essential functions of a powerful jump starter, a precise tire inflator, an LED flashlight, and a portable power bank. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Image: The HPBS 5000A Tire Inflator (right) and 3000A Car Jump Starter (left) shown together, highlighting their compact design.

Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat u lill-vettura:

• Żomm l-apparat 'il bogħod mit-tfal.
• Tesponix l-apparat għax-xita jew għal temperaturi estremi.
• Kun żgur li jkun hemm ventilazzjoni xierqa waqt it-tħaddim u l-iċċarġjar.
• Tippruvax tiżżarma jew timmodifika l-apparat.
• Uża biss l-aċċessorji u l-kejbils provduti.
• Evita li tagħmel short circuit tal-jump starter clamps.
• Wear eye protection when operating the jump starter.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.

Image: Visual representation of the 10 built-in safety protections, including spark resistance, over-charge, over-current, short-circuit, over-heat, extreme temperature, over-voltage, reverse connection, reverse polarity, and over-discharge protection.

Prodott Overview

Komponenti u Karatteristiċi

The HPBS 5000A Tire Inflator and 3000A Car Jump Starter are designed for versatility and ease of use.

3000A Karozza Jump Starter

• Port tal-Ħruġ tal-EC5: For connecting smart jump cables.
• Buttuna ON/OFF: Jagħti poteri lill-apparat.
• Flashlight LED: Provides illumination with Normal, Strobe, and SOS modes.
• USB Output Ports (USB1, USB2): Għall-iċċarġjar ta' apparati esterni.
• Port tad-Dħul USB-C: Għall-iċċarġjar tal-unità tal-jump starter.
• Dwal indikaturi: Show battery level and status.
• Wirja Diġitali: Juri l-perċentwali tal-batterijatage.

Immaġni: Close-up view of the 3000A Jump Starter, labeling the EC5 Output Port, ON/OFF Button, LED Flashlight, USB Output 1, USB-C Input, USB Output 2, and Indicator Lights.

5000A Tire Inflator

• Inflator Interface: For connecting the air hose.
• Star Output Port: (Likely a DC output for specific accessories, or mislabeled from jump starter)
• Skrin tad-displej: Shows current pressure, target pressure, and unit.
• Preset Air Pressure Plus Key (+): Iżżid il-pressjoni fil-mira.
• Mode/Unit Switching Button: Toggles between PSI, KPA, BAR, Kg/cm² and preset modes (car, motorcycle, bicycle, ball).
• Power Supply/Inflation Start Button: Initiates or stops inflation.
• Buttuna tad-Dawl: Activates the LED light.
• Preset Air Pressure Key Reduction (-): Tnaqqas il-pressjoni fil-mira.
• Dawl LED: Built-in light for visibility.
• Port tal-Ħruġ USB: Għall-iċċarġjar ta' apparati esterni.
• Port tad-Dħul tat-Tip C: For charging the inflator unit.

Immaġni: Close-up view of the 5000A Tire Inflator, labeling the display screen, preset air pressure keys, mode/unit button, power/inflation button, lighting button, LED lighting, USB output port, Type-C input port, inflator interface, and star output port.

Setup

Iċċarġjar Inizjali

Before first use, fully charge both the 5000A Tire Inflator and the 3000A Car Jump Starter.

1. Connect the provided USB-C charging cable to the Type-C Input Port on each device.
2. Qabbad it-tarf l-ieħor tal-kejbil ma' adapter tal-ħajt USB (mhux inkluż) jew port USB li jaħdem bl-elettriku.
3. The digital display on each device will indicate the charging status. Charge until the display shows 100%.

It is recommended to fully charge the devices every 3-6 months, even when not in use, to maintain battery health.

Istruzzjonijiet Operattivi

Using the 3000A Car Jump Starter

This jump starter is designed to safely start vehicles with dead batteries.

1. Kun żgur li l-jump starter huwa ċċarġjat mill-inqas 50%.
2. Connect the smart jump cable's blue end into the EC5 Output Port of the jump starter.
3. Qabbad il-cl aħmaramp mat-terminal pożittiv (+) tal-batterija tal-vettura.
4. Qabbad il-cl iswedamp mat-terminal negattiv (-) tal-batterija tal-vettura.
5. Żgura li l-clamps are securely attached and there is no corrosion.
6. Ibda l-magna tal-vettura.
7. Ladarba tibda l-magna, neħħi immedjatament il-klampampmill-batterija tal-vettura, l-ewwel il-polz iswed (-)amp, imbagħad il-marka ħamra (+)amp.
8. Disconnect the smart jump cable from the jump starter.

Importanti: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive starts.

Image: The HPBS 3000A Jump Starter connected to a car battery with its red and black clamps, demonstrating its use for jump-starting a vehicle.

Image: The HPBS 3000A Jump Starter connected to a car battery, illustrating its capability to jump-start various vehicle types including vans, pick-ups, SUVs, motorboats, motorcycles, and lawn mowers.

Using the 5000A Tire Inflator

Inflate tires and other inflatables with precision.

1. Connect the air hose to the Inflator Interface on the device.
2. Screw the air hose nozzle onto the tire valve stem.
3. Press the Mode/Unit Switching Button to select the desired unit (PSI, KPA, BAR, Kg/cm²) and preset mode (car, motorcycle, bicycle, ball).
4. Use the Preset Air Pressure Plus (+) and Minus (-) keys to set the target pressure. Refer to your vehicle's manual or door jamb sticker for recommended tire pressure.
5. Press the Power Supply/Inflation Start Button to begin inflation. The device will automatically stop when the target pressure is reached.
6. Unscrew the air hose nozzle from the tire valve stem and disconnect the hose from the inflator.

Image: The HPBS 5000A Tire Inflator connected to a car tire, demonstrating its cordless operation and pressure detection capability.

Using the LED Flashlight (Both Devices)

Both the jump starter and tire inflator feature an integrated LED flashlight.

• On the 3000A Jump Starter, press and hold the ON/OFF button to activate the flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.
• On the 5000A Tire Inflator, press the Lighting Button to activate the flashlight. Press again to cycle through modes (if applicable). Press again to turn off.

Using as a Portable Power Bank (Both Devices)

Both devices can charge your electronic gadgets.

• Connect your device's USB charging cable to one of the USB Output Ports on the jump starter or tire inflator.
• L-apparat jibda jiċċarġja awtomatikament.

Image: The HPBS 3000A Jump Starter functioning as a 74WH portable power bank, charging a mobile phone and a tablet simultaneously.

Manutenzjoni

• Tindif: Imsaħ l-apparati b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Ħażna: Aħżen l-apparati f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Iċċarġjar: Recharge the devices every 3-6 months to maintain battery life, even if not used.
• Kura tal-Cable: Spezzjona l-kejbils u l-klampiamps for damage before each use. Replace if frayed or damaged.

Issolvi l-problemi

Speċifikazzjonijiet

• Ditta: HPBS
• Numru tal-Mudell: 4726f0d1-c453-4aaa-b8f1-1288963ca631
• Jump Starter Peak Current: 3000A
• Tire Inflator Pressure: Sa 150 PSI
• Kapaċità tal-batterija: Approx. 74WH (for power bank function)
• Input: USB-C
• Output: USB-A (for charging devices), EC5 (for jump starting)
• Tip ta' Servizz ta' Vettura: Automotive
• Data L-Ewwel Disponibbli: 21 ta’ Novembru, 2024

Garanzija u Appoġġ

For warranty information and technical support, please refer to the product packaging or contact HPBS customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official HPBS store on Amazon: HPBS Store