Introduzzjoni
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Informazzjoni dwar is-Sigurtà
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Kontenut tal-Pakkett
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Ċilindru tal-Lift tal-Gass
- Assemblaġġ tas-Sedil
- Assemblaġġ tad-dahar
- Serħan tar-ras
- Serħan tad-dirgħajn (Xellug u Lemin)
- Footrest (if applicable to your model)
- Ħardwer tal-Assemblaġġ (viti, woxers, Allen wrench)
- Manwal ta' Istruzzjoni
Istruzzjonijiet ta' Armar
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Arma l-Bażi tas-Siġġu: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Attach the Armrests: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Waħħal id-Dahar tas-Serħan: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Poġġi s-sedil u d-dahar immuntati bir-reqqa fuq iċ-ċilindru tal-irfigħ tal-gass, waqt li tiżgura li jkun iċċentrat u stabbli.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Istruzzjonijiet Operattivi u Aġġustamenti
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Aġġustament tal-Għoli tas-Sedil
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Aġġustament Vertikali: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. Serħan tad-dirgħajn aġġustabbli 3D
The armrests provide versatile support and can be adjusted in three dimensions:
- Aġġustament Għoli: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Rotazzjoni: Dawwar 40 grad lejn ix-xellug u l-lemin.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Aġġustament tal-serħan tar-ras: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Funzjoni ta' Mimdud: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Immaġni: Close-up view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Manutenzjoni
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Tindif tad-Drapp tal-Malja: The breathable mesh fabric can be cleaned with a damp drapp u sapun ħafif. Evita kimiċi ħarxa.
- Tindif tal-qafas: Wipe the alloy steel frame and plastic components with a soft, damp drapp.
- Manutenzjoni tar-roti: Iċċekkja r-roti perjodikament għal xagħar jew debris u naddafhom kif meħtieġ biex tiżgura moviment bla xkiel.
- Issikka l-Qfieli: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
Immaġni: Imkabbra view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-siġġu ma jaġġustax l-għoli | Ħsara fiċ-ċilindru tal-irfigħ tal-gass jew il-lieva mhux attivata. | Kun żgur li l-lieva tal-aġġustament tal-għoli hija kompletament attivata. Jekk il-problema tippersisti, iċ-ċilindru tal-irfigħ tal-gass jista' jkollu bżonn jiġi mibdul. Ikkuntattja l-appoġġ għall-klijenti. |
| Is-siġġu jitħawwad jew iħossu instabbli | Viti maħlula jew art irregolari. | Iċċekkja u ssikka l-viti kollha tal-assemblaġġ. Kun żgur li s-siġġu jkun fuq wiċċ ċatt u uniformi. |
| Armrests are loose | Il-viti tal-immuntar huma maħlula. | Tighten the screws securing the armrests to the seat. |
| Id-dahar tas-serħan ma jimteddx jew ma jissakkarx | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Speċifikazzjonijiet
- Ditta: Hbada
- Mudell: E2
- Kulur: Iswed
- Dimensjonijiet tal-Prodott: 30.51"D x 22.24"W x 18.11"H
- Stil ta' Dahar: Malja
- Firxa ta' Età (Deskrizzjoni): Adulti
- Stil tad-driegħ: Padded, 3D Adjustable
- Imla Materjal: Malja
- Materjal: Alloy Steel (Frame), Mesh (Seat/Back)
- Għadd tal-Pożizzjoni Mimduda: 3 (sa 135 grad)
- Inklinazzjoni: Iva
- Fattur tal-Formola: President tal-Uffiċċju
Garanzija u Appoġġ
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Sostituzzjoni tal-Partijiet: Parts are replaced, not repaired, for covered issues.
- Politika ta' Ritorn ta' 30 Jum: Enjoy a 30-day return period without specific reasons required.
- Imħassra mal-Wasla: Repair and replacement are guaranteed for items damaged during shipping.
- Servizz tal-Klijent: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Għal aktar informazzjoni, żur il- Ħanut Hbada fuq Amazon.
