Introduzzjoni
Thank you for choosing the EDYELL A1 Bluetooth Headset. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new motorcycle helmet headset. Please read this manual thoroughly before use to ensure optimal performance and safety. Keep this manual for future reference.
Prodott Overview
Karatteristiċi ewlenin:
- Display LED intelliġenti: Provides real-time information on battery capacity, Bluetooth pairing status, and FM channel.
- 50MM Speakers: Enhanced volume and bass performance for a superior audio experience.
- Ħajja twila tal-batterija: 800mAh battery offers up to 30 hours of music playback, 40 hours of calls, and over 300 hours of standby time.
- Auto Call Answer & Voice Control: Automatically answers calls in 10 seconds and supports voice assistant activation (Siri/Voice Assistant).
- IP67 li ma jgħaddix ilma minnha: Iddisinjat biex jiflaħ diversi kundizzjonijiet tat-temp.
- Kompatibilità Universali: Compatible with most motorcycle helmets.
Komponenti:
The EDYELL A1 headset includes the main unit, 50mm speakers, and microphones, along with necessary cables for installation and charging.
Setup
1. Iċċarġja tal-Headset:
- Connect the provided Type-C charging cable to the headset's charging port and a USB power source.
- Id-displej LED jindika l-istatus tal-iċċarġjar. Iċċarġjar sħiħ jieħu madwar 1.5 sigħat.
- Ensure the headset is fully charged before first use for optimal battery longevity.
2. Helmet Installation:
- Attach the main headset unit to the side of your helmet using the provided mounting clip or adhesive bracket. Ensure it is securely fastened.
- Carefully route the speaker wires inside the helmet lining. Position the 50mm speakers into the ear pockets of the helmet. If your helmet lacks specific cutouts, ensure the speakers are placed comfortably without causing pressure points.
- Attach the microphone to a suitable position inside the helmet, typically near your mouth, ensuring clear voice pickup and minimal wind noise.
- Connect the speaker and microphone cables to the main headset unit.
3. Tqabbil tal-Bluetooth:
- With the headset powered off, press and hold the power button until the LED display shows "Pairing" or a similar indicator.
- Fuq it-tagħmir mobbli tiegħek, ippermetti l-Bluetooth u fittex tagħmir disponibbli.
- Select "EDYELL A1" from the list of devices.
- Once connected, the LED display will confirm the successful pairing.
Istruzzjonijiet Operattivi
Power On/Off:
- Qawwa Mixgħul: Press and hold the power button for approximately 3 seconds until the LED display illuminates.
- Itfi: Press and hold the power button for approximately 5 seconds until the LED display turns off.
Daqq tal-mużika:
- Play/Pawsa: Agħfas il-buttuna b'diversi funzjonijiet darba.
- Track li jmiss: Agħfas il-buttuna '+'.
- Track preċedenti: Agħfas il-buttuna '-'.
- Volum 'il fuq: Agħfas fit-tul il-buttuna '+'.
- Volum 'l isfel: Agħfas fit-tul il-buttuna '-'.
Immaniġġjar tas-Sejħiet:
- Irrispondi Sejħa: The headset will automatically answer incoming calls after 10 seconds. Alternatively, press the multi-function button once to answer immediately.
- Tmiem Sejħa: Agħfas il-buttuna multi-funzjoni darba waqt telefonata.
- Irrifjuta Sejħa: Agħfas u żomm il-buttuna multi-funzjoni għal żewġ sekondi meta tidħol telefonata.
- Isemmi mill-ġdid l-Aħħar Numru: Agħfas darbtejn il-buttuna multi-funzjoni.
Kontroll tal-Vuċi:
Activate your smartphone's voice assistant (Siri, Google Assistant, etc.) by pressing the dedicated voice control button on the headset. You can then issue commands such as making calls, getting directions, or playing specific music.
Radju FM:
- Activate FM: Agħfas il-buttuna 'M' biex taqleb għall-modalità tar-radju FM.
- Scan Channels: Press the multi-function button to automatically scan and save available FM stations.
- Change Station: Use the '+' and '-' buttons to cycle through saved stations.
- Exit FM: Press the 'M' button again to return to Bluetooth mode.
Wiri LED:
The smart LED display provides visual feedback on the headset's status, including battery level, Bluetooth connection status, and current FM frequency. Refer to the display for quick status checks.
Manutenzjoni
Tindif:
- Imsaħ l-unità tal-headset b'ċarruta ratba uamp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
- The IP67 waterproof rating protects against dust and temporary immersion in water, but avoid prolonged submersion.
Ħażna:
- Aħżen il-headset f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- If storing for an extended period, charge the battery to approximately 50% to preserve its lifespan.
Kura tal-batterija:
- Evita li tiċċarġja l-batterija kompletament ta' spiss.
- Iċċarġja l-headset regolarment, anke jekk ma tkunx qed tużah ta' spiss, biex iżżomm il-batterija f'saħħitha.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-headset ma jixgħelx. | Batterija baxxa. | Iċċarġja l-headset għal mill-inqas sagħtejn. |
| Ma tistax tqabbad mat-tagħmir. | Il-headset mhux fil-modalità ta' tqabbil; il-Bluetooth mitfi fuq l-apparat; l-apparat wisq 'il bogħod. | Ensure headset is in pairing mode (LED indicator); enable Bluetooth on your device; keep devices within 1 meter during pairing. |
| L-ebda ħoss jew volum baxx. | Volume too low; speakers improperly positioned; loose connection. | Increase volume on both headset and connected device; adjust speaker position in helmet; check all cable connections. |
| Poor call quality (other person cannot hear me clearly). | Microphone not positioned correctly; excessive wind noise. | Adjust microphone closer to your mouth; ensure microphone is shielded from direct wind. |
| Audio imbalance (one speaker louder). | Speaker positioning; internal wiring issue. | Verify both speakers are correctly and equally positioned in the helmet's ear pockets. If issue persists, contact support. |
| Ir-radju FM mhux qed jaħdem. | Weak signal; not in FM mode. | Move to an area with better signal; ensure headset is in FM mode (press 'M' button). |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | MBH-A1 |
| Teknoloġija tal-Konnettività | Wireless (Bluetooth) |
| Verżjoni Bluetooth | 5.0 |
| Tip ta' Sewwieq Awdjo | Sewwieq Dinamiku (Speakers ta' 50mm) |
| Kontroll tal-Ħoss | Kanċellazzjoni Attiva tal-Ħoss |
| Kapaċità tal-batterija | 800mAh Lithium Ion |
| Ħin tal-Iċċarġjar | 1.5 Sigħat |
| Ħin ta 'Daqq tal-Mużika | Sa 30-il Siegħa |
| Ħin tas-Sejħa | Sa 40-il Siegħa |
| Ħin ta' Standby | Aktar minn 300 Sigħat |
| Livell ta 'Reżistenza għall-Ilma | IP67 Waterproof |
| Metodu ta' Kontroll | Mess, Voice |
| Piż tal-oġġett | 270 Gramm |
| Dimensjonijiet tal-Prodott | 14 x 9.5 x 6 ċm |
| Komponenti Inklużi | Kejbil |
Garanzija u Appoġġ
Garanzija:
The EDYELL A1 Bluetooth Headset comes with a 12 Months EDYELL India Warranty mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Appoġġ għall-Klijent:
For any questions, technical assistance, or warranty claims, please contact EDYELL customer service:
- Email: support@fenman.in
- Telefon: +91 8882786235