VGEBY S810 LED Electric Display Control Panel User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of the VGEBY S810 LED Electric Display Control Panel. Designed for electric bicycles and scooters, this display is compatible with 36V and 48V systems and integrates with JN Controllers and Pasion Electric Motor Kits. Please read this manual thoroughly before use to ensure proper function and safety.

2. Informazzjoni dwar is-Sigurtà

• Always ensure the power is off before installing or removing the display.
• Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
• Keep the display away from water and extreme temperatures.
• Ensure all connections are secure to prevent electrical shorts or malfunctions.
• Regularly check the display and wiring for any signs of damage.

3. Prodott Aktarview

The S810 LED Electric Display provides essential information and control for your electric vehicle. It features an intuitive interface with buttons for power, light control, and mode selection, along with indicators for battery level and thrust settings.

Figura 3.1: Quddiem view of the VGEBY S810 LED Electric Display Control Panel, showing the 'ON/OFF', 'LIGHT', and 'MODE' buttons, along with power and thrust indicators. The green connector is visible on the cable.

Figura 3.2: The S810 display with approximate dimensions: 82mm (3.2in) width and 42mm (1.7in) height. The wire length with connector is approximately 21.5cm (8.5in).

Figura 3.3: Close-up view of the JULET connector, which ensures a secure and compatible connection to the electric system.

4. Setup u Installazzjoni

4.1 Kompatibilità

• Voltage: Compatible with 36V and 48V electric systems.
• Dijametru tal-manubriju: Suitable for 22.2mm (0.87in) diameter handlebars.
• Controller/Motor Kit: Designed for use with JN Controllers and Pasion Electric Motor Kits.
• Protokoll ta' Komunikazzjoni: The S810 display requires products that are consistent with its communication protocol for proper function.

4.2 Passi ta' Installazzjoni

1. Ipprepara l-Manubriju: Ensure the handlebar area where the display will be mounted is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
2. Wirja tal-Muntanja: Position the S810 display on the handlebar in a comfortable and visible location. Secure it using the integrated mounting bracket and screws.


Figura 4.1: Wara view of the S810 display, showing the mounting bracket and screw for handlebar attachment.

3. Qabbad il-Wiring: Connect the display's cable to the corresponding port on your electric bicycle's controller (e.g., JN Controller). Ensure the JULET connector is fully inserted and secure.

Figura 4.2: The S810 display correctly mounted on a 22.2mm diameter bicycle handlebar, demonstrating its typical installed position.
4. Ivverifika l-Konnessjoni: After installation, double-check all connections to ensure they are tight and correctly aligned.

5. Istruzzjonijiet Operattivi

The S810 display offers straightforward controls for managing your electric vehicle's functions.

Figura 5.1: Angolat view of the S810 display, highlighting the 'ON/OFF', 'LIGHT', and 'MODE' buttons, along with the power and thrust level indicators.

5.1 Power On/Off

• Agħfas il- ON/OFF button to power on the display and the electric system.
• Agħfas u żomm il- ON/OFF buttuna biex titfi s-sistema.

5.2 Kontroll tad-Dawl

• Agħfas il- DAWL button to turn the vehicle's lights on or off.

5.3 Mode/Thrust Control

• Agħfas il- MODALITÀ button to cycle through different thrust levels: BAXXA, MED (Medium), and GĦOLJA.
• The corresponding indicator lights (Low, Med, High) will illuminate to show the currently selected thrust level.
• The display features a gear memory function, which automatically restores the last selected gear setting upon power-on.

5.4 Wiri tal-Qawwa

• The power indicator section (labeled 'POWER') accurately shows the true battery power level.
• The display also records real-time power consumption, allowing you to track your riding mileage effectively.

Figura 5.2: Dettaljati view of the 'POWER' indicator and the 'LOW-MED-HIGH' thrust level indicators on the S810 display.

6. Manutenzjoni

• Tindif: Wipe the display surface with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
• Spezzjoni: Periodically check the wiring and connectors for any signs of wear, corrosion, or damage. Ensure the display is securely mounted.
• Ħażna: If the electric vehicle is stored for an extended period, ensure the display is powered off and stored in a dry, temperate environment.

7 Issolvi l-problemi

• Id-Displej Mhux Mixgħul:
  • Check if the main battery of the electric vehicle is charged.
  • Ensure all cable connections, especially the main power cable to the display, are secure.
  • Verify that the display is compatible with your controller's communication protocol.
• Incorrect Power Reading:
  • Ensure the display is correctly configured for your 36V or 48V system (if adjustable, though S810 is typically auto-sensing).
  • Check the battery connections for any loose contacts.
• Buttuni ma jirrispondux:
  • Power cycle the display by turning it off and on again.
  • Kun żgur li l-ebda debris ma qed jostakola l-buttuni.
• Lights Not Activating:
  • Check the connection between the display and the vehicle's lighting system.
  • Verify the lights themselves are functional.

If problems persist, consult a qualified technician or contact customer support.

8. Speċifikazzjonijiet

Figura 8.1: The S810 display shown alongside an electric bicycle and an electric scooter, illustrating its intended applications.

9. Garanzija u Appoġġ

VGEBY products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.