BONTEC Full Motion TV Wall Mount Instruction Manual

1. Introduzzjoni

Thank you for choosing the BONTEC Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed for 26-60 inch LED LCD Flat & Curved TVs with a maximum weight capacity of 88 lbs (40 kgs) and VESA compatibility up to 400x400mm.

2. Informazzjoni dwar is-Sigurtà

• Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-installazzjoni. Tużax jekk xi partijiet huma neqsin jew difettużi.
• This product is intended for installation on solid concrete walls, brick walls, or wood stud walls. TIMMONTAX WAĦDU FUQ IL-ĦAJT TAL-ĠISWED.
• Verify the wall structure can safely support the combined weight of the mount and your TV. Consult a qualified professional if unsure.
• Do not exceed the maximum weight capacity of 88 lbs (40 kgs).
• Uża tagħmir tas-sigurtà xieraq waqt l-installazzjoni, inkluż protezzjoni għall-għajnejn.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
• Tighten all screws firmly but do not overtighten to avoid stripping or damaging components.

3. Kontenut tal-Pakkett

Please check the package to ensure all parts are included:

Image: Included hardware for the BONTEC TV Wall Mount.

• Assemblea tal-Ħajt
• Concrete Anchors (x3)
• Lag Bolts (x3)
• Washers (φ6mm x3)
• Wrench
• TV Mounting Screws: M4*12mm (x4), M4*30mm (x4), M6*15mm (x4), M6*30mm (x4), M8*20mm (x4), M8*50mm (x4)
• Spacers: D8*5mm (x8), D8*10mm (x8)
• Square Washers (M4/M6/M8)

4. Speċifikazzjonijiet

Image: Compatibility and VESA standards for the mount.

5. Setup u Installazzjoni

5.1 Kontrolli ta' qabel l-installazzjoni

• Identify your wall type: Wood Studs, Concrete, or Brick.
• Gather necessary tools: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver.
• Determine the desired height and position for your TV.

Image: Applicable wall types for installation.

5.2 Twaħħil tal-Brakketti mat-TV

1. Poġġi t-TV tiegħek b'attenzjoni wiċċu 'l isfel fuq wiċċ artab u nadif.
2. Identifika t-toqob tal-immuntar tal-VESA fuq wara tat-TV tiegħek.
3. Select the correct screws (M4, M6, or M8) and spacers that fit your TV's mounting holes. Use spacers if the TV back is uneven or if screws are too long.
4. Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure they are securely fastened and level.

5.3 Immuntar tal-Pjanċa tal-Ħajt

1. Mark the desired drilling locations on the wall using the wall plate as a template. Use a level to ensure accuracy.
2. Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the lag bolts/anchors used.
3. For concrete/brick walls: Insert the concrete anchors into the drilled holes.
4. Align the wall plate with the drilled holes and secure it to the wall using the lag bolts and washers. Tighten firmly.

Image: The BONTEC Full Motion TV Wall Mount.

5.4 Iddendel it-TV

1. Bl-għajnuna, erfa’ bir-reqqa t-TV bil-parentesi mwaħħlin u waħħalhom mal-pjanċa tal-ħajt.
2. Kun żgur li t-TV huwa mwaħħal sew mal-pjanċa tal-ħajt.
3. Issikka kwalunkwe viti tas-sigurtà jew mekkaniżmi ta' qfil fuq il-parentesi tat-TV biex tevita li jinqalgħu aċċidentalment.

Image: Easy installation process.

6. Istruzzjonijiet Operattivi

The BONTEC Full Motion TV Wall Mount offers various adjustments for optimal viewesperjenza:

• Dawwar: The mount allows for a swivel range of up to ±90 degrees, enabling you to adjust the TV's horizontal viewing angle. Gently push or pull the TV to the desired position.
• Mejjel: You can tilt the TV from +5 degrees (upward) to -10 degrees (downward) to reduce glare and optimize vertical viewangoli tal-inklinazzjoni. Ħoll il-pumi tal-aġġustament tal-inklinazzjoni, issettja l-angolu mixtieq, u ssikka mill-ġdid.
• Aġġustament tal-Livell: If your TV appears slightly unlevel after installation, you can adjust it by ±3 degrees. Loosen the leveling screws, adjust the TV, and re-tighten.
• Estensjoni: The mount can extend from a minimum of 3.15 inches to a maximum of 19.7 inches from the wall, providing flexibility for viewing and accessing cables.

Image: Swivel, Tilt, and Level adjustments for enhanced viewing.

Image: Extended distance from the wall.

7. Manutenzjoni

• Iċċekkja regolarment il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
• Naddaf il-muntatura b'ċarruta ratba u niexfa. Evita li tuża prodotti tat-tindif jew solventi li joborxu.
• Do not apply lubricants to the moving parts unless specifically instructed by the manufacturer.

8 Issolvi l-problemi

• TV mhux livellat: Loosen the leveling screws, adjust the TV to the desired level, and re-tighten the screws.
• Il-muntatura tħossha maħlula: Check all wall plate and TV bracket screws. Ensure they are tightened securely. If mounted on wood studs, verify the studs were properly located. If on concrete/brick, ensure anchors are fully seated.
• Difficulty adjusting swivel/tilt: Ensure no cables are snagged or obstructing movement. Check if adjustment knobs/screws are too tight; loosen slightly if necessary.
• Partijiet neqsin: Refer to the 'Package Contents' section. If parts are genuinely missing, contact BONTEC customer support.

9. Garanzija u Appoġġ

BONTEC products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official BONTEC website. If you encounter any issues or require technical assistance, please contact BONTEC customer support through the following channels:

• Websit: Visit the BONTEC official websit għal FAQs u informazzjoni ta' kuntatt għall-appoġġ.
• Email: Refer to your product packaging or warranty card for customer service email address.

Please have your model number (MG400-US-FBA) and purchase details ready when contacting support.