Geeni Smart Water Alarm Leak Detector with Siren - User Manual

Introduzzjoni

The Geeni Smart Water Alarm Leak Detector with Siren is designed to provide early warning of water leaks in your home. This device helps prevent potential water damage by detecting leaks and alerting you through its built-in siren and mobile application. It integrates with your home Wi-Fi network for remote monitoring and smart home automation.

Karatteristiċi Ewlenin

• Instant Leak Detection: Rapidly identifies the presence of water.
• Twissijiet f'ħin reali: Sends immediate notifications to your smartphone.
• Built-in 80dB Alarm: Emits a loud siren to alert occupants.
• Monitor from Anywhere: Access device status and alerts remotely via the Geeni app.
• Integrazzjoni tad-Dar Intelliġenti: Compatible with other Geeni smart home products for automated responses.
• Twissija Batterija Baxxa: Javżak meta l-batteriji jeħtieġu li jinbidlu.
• Setup faċli: Designed for quick and straightforward installation.
• 24/7 Peace of Mind: Continuous monitoring for enhanced home safety.

Figure 1: Key features of the Geeni Smart Water Alarm Leak Detector.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1x Geeni Smart Water Sensor
• 1x Siren Mounting Adhesive
• 1x Manwal għall-Utent
• 2x Batteriji AAA

Figura 2: Kontenut inkluż fil-pakkett tal-prodott.

Prodott Overview

Familiarize yourself with the components of your Geeni Smart Water Alarm Leak Detector:

• Dawl LED: Indicates device status (e.g., pairing mode, leak detected).
• Issettja Ċavetta: Użat għall-akkoppjar u r-resetjar tal-apparat.
• Kelliem: Emits the 80dB siren alarm.
• Sensor Probe: The part that detects water. Must be placed flat on the surface where leaks may occur.
• Kompartiment tal-batterija: Holds 2x AAA batteries.
• Tul tal-Cable: The sensor probe is connected to the main unit by a 3.28 ft (1 m) cable.

Figura 3: Quddiem u wara view of the device with labeled components and dimensions.

Setup

1. Installa Batteriji

1. Iftaħ il-kompartiment tal-batterija fuq wara tal-unità prinċipali.
2. Daħħal 2 batteriji AAA, waqt li tiżgura l-polarità korretta.
3. Agħlaq il-kompartiment tal-batterija sew.

2. Download and Install the Geeni App

• Fittex għal "Geeni" fl-Apple App Store jew fil-Google Play Store.
• Niżżel u installa l-app.
• Irreġistra għal kont ġdid jew idħol jekk diġà għandek wieħed.

3. Pair the Device with Wi-Fi

1. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The device does not support 5 GHz networks.
2. Open the Geeni app and tap the "+" icon to add a new device.
3. Follow the on-screen instructions in the app to put the water sensor into pairing mode and connect it to your Wi-Fi network. The LED light on the device will indicate its pairing status.

4. Tqegħid tal-Apparat

Strategically place the water sensor in areas prone to leaks:

• Taħt is-sinkijiet (kċina, kamra tal-banju)
• In basements
• Ħdejn il-ħiters tal-ilma
• In laundry rooms
• Behind dishwashers or refrigerators

Use the provided mounting adhesive to secure the main unit. Ensure the sensor probe lies flat on the surface where water might accumulate first.

Figura 4: Eżamples of multi-use placement for the water sensor.

Operazzjoni

Sejbien ta' Tnixxijiet u Twissijiet

Once installed and connected, the Geeni Smart Water Alarm continuously monitors for water. When the sensor probe detects water:

• The device will emit a loud 80-decibel siren.
• You will receive an immediate notification on your smartphone via the Geeni app.

Figure 5: Real-time leak detection and app notification.

L-aġġustament tas-Settings tal-Allarm

You can customize the alarm settings through the Geeni app:

• Volum tas-Sirena: Adjust the volume from mute (0dB) up to 80dB.
• Tul ta' Allarm: Set the duration of the siren from 30 seconds to 180 seconds.

Figure 6: Alarm volume and duration adjustment options.

Manutenzjoni

Sostituzzjoni tal-batterija

The device is powered by 2x AAA batteries with an expected lifespan of 3-4 months. The Geeni app will send a low battery alert when replacement is needed.

1. When a low battery alert is received, open the battery compartment.
2. Remove the old batteries and insert two new AAA batteries, observing correct polarity.
3. Agħlaq il-kompartiment tal-batterija.

Ittestjar tal-Apparat

It is recommended to periodically test the water sensor to ensure it is functioning correctly:

1. Place a small amount of water (e.g., a few drops) onto the sensor probe.
2. Verify that the siren sounds and you receive a notification on your smartphone.
3. Dry the sensor probe thoroughly after testing.

Issolvi l-problemi

• L-apparat mhux qed jikkonnettja mal-Wi-Fi:
  Ensure your Wi-Fi network is 2.4 GHz. The device does not support 5 GHz. Try moving the device closer to your Wi-Fi router. If issues persist, try deleting the device from the Geeni app and re-pairing it following the setup instructions.
• L-ebda notifika tal-app:
  Check your smartphone's notification settings for the Geeni app to ensure notifications are enabled. Also, verify that the device is properly connected to Wi-Fi and has sufficient battery power.
• Siren not sounding or too quiet:
  Check the battery level. Ensure the siren volume is not set to mute in the Geeni app settings.
• Is-senser mhux qed jiskopri l-ilma:
  Ensure the sensor probe is lying flat and making good contact with the surface where water might collect. Clean the sensor contacts if they appear dirty.
• Device appears offline in app:
  Check your Wi-Fi connection. If the Wi-Fi network is down or unstable, the device may appear offline. Replace batteries if they are low.

For further assistance, refer to the support section within the Geeni app or visit support.mygeeni.com.

Speċifikazzjonijiet

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

Dan il-prodott Geeni jiġi ma’ Garanzija limitata ta 'sena mid-data tax-xiri. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet taħt garanzija. Il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.

Appoġġ għall-Klijent

If you encounter any issues or have questions regarding your Geeni Smart Water Alarm Leak Detector, please contact Geeni customer support:

• Appoġġ onlajn: Żur support.mygeeni.com
• Appoġġ fl-App: Access support directly through the Geeni mobile application.