CNBINGO DS-1081WL-2B Smart Wi-Fi Wall Switch (2-Gang, Black)

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your CNBINGO DS-1081WL-2B Smart Wi-Fi Wall Switch. This 2-gang smart switch is designed for recessed installation and offers convenient control of your lighting through touch, voice commands via Alexa and Google Assistant, and remote access via a smartphone application. Please read this manual thoroughly before installation and use to ensure safe and correct operation.

Informazzjoni dwar is-Sigurtà

• Sigurtà Elettrika: L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jew minn persuna b'fehim sħiħ tas-sistemi elettriċi. Dejjem itfi l-enerġija mis-circuit breaker qabel l-installazzjoni, il-manutenzjoni, jew it-tneħħija tal-apparat.
• Voltage: This device operates on 240 Volts (AC). Ensure your electrical system is compatible.
• Kapaċità tat-Tagħbija: Do not exceed the maximum power rating of 100 Watts. Overloading can cause damage to the switch and connected devices, and poses a fire hazard.
• Ambjent: Install in a dry indoor location. Avoid exposure to moisture, extreme temperatures, or corrosive environments.
• Tfal: Żomm il-materjali tal-ippakkjar u l-partijiet żgħar 'il bogħod mit-tfal.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti qabel ma tipproċedi bl-installazzjoni:

• CNBINGO DS-1081WL-2B Smart Wi-Fi Wall Switch (2-Gang, Black)
• Viti tal-Immuntar
• Manwal ta 'Istruzzjoni (dan id-dokument)
• Capacitor (for wiring without neutral wire)

Speċifikazzjonijiet

Setup

1. Installazzjoni Fiżika

Before beginning installation, ensure the main power supply to the circuit is turned OFF at the circuit breaker to prevent electrical shock.

The switch is designed for recessed installation in a standard wall box. The product dimensions are 8.6 cm x 8.6 cm, with a depth of 2.7 cm. The wall box should have a minimum depth of 35 mm and a diameter of 60 mm for proper fitting.

Image: Product dimensions of the CNBINGO smart switch, showing a front view of 86mm x 86mm and a side view with a depth of 27mm. Below, diagrams illustrate suitable wall box dimensions (minimum 35mm depth, 60mm diameter) and an unsuitable shallow box.

Istruzzjonijiet tal-Wiring

The switch supports two types of wiring: with a neutral wire or without a neutral wire. Refer to the diagram below for correct connections.

Image: Two wiring diagrams for the smart switch. The left diagram illustrates wiring without a neutral wire, showing the Live Wire (red) connected to L1, L2, L3 terminals, and the Neutral Wire (blue) connected to the N terminal. An adapter is shown connected to the L1 lamp. The right diagram shows wiring with a neutral wire, where the Live Wire (red) connects to L1, L2, L3, and the Neutral Wire (blue) connects to the N terminal, with no adapter required. A warning states that the adapter must be connected to both ends of the L1 bulb regardless of the product purchased.

• Wiring with Neutral Wire: Connect the Live wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and the load wires (to your lights) to 'L1', 'L2', 'L3' as appropriate for each gang. No capacitor is needed.
• Wiring without Neutral Wire: Connect the Live wire to the 'L' terminal and the load wires to 'L1', 'L2', 'L3'. A capacitor must be connected across the L1 lamp (between the Live and Load wires of the L1 circuit) to ensure stable operation.

After wiring, secure the switch into the wall box using the provided screws. Reattach the faceplate.

2. Tqabbil tal-App

To enable smart features, you need to pair the switch with the Smart Life or Tuya app.

1. Niżżel il- Ħajja Intelliġenti or Tuya Smart app mill-ħanut tal-apps tal-ismartphone tiegħek (iOS jew Android).
2. Irreġistra jew idħol fil-kont tiegħek.
3. Kun żgur li l-ismartphone tiegħek huwa konness ma' Netwerk Wi-Fi 2.4 GHz. The switch does not support 5 GHz Wi-Fi.
4. Turn on the power to the switch at the circuit breaker. The switch's LED indicator should blink rapidly, indicating it's in pairing mode. If not, press and hold one of the touch buttons for 5-10 seconds until it blinks rapidly.
5. In the app, tap the '+' icon to add a device. Select 'Light Switch' or 'Wall Switch' from the device list.
6. Follow the on-screen instructions to connect the switch to your Wi-Fi network. You may need to confirm the blinking status of the LED.
7. Once successfully paired, you can rename the switch and assign it to a room within the app.

Istruzzjonijiet Operattivi

1. Basic Touch Control

Each gang on the switch has a touch-sensitive area. Simply tap the area to turn the connected light ON or OFF.

2. Kontroll tal-Vuċi

The CNBINGO Smart Switch is compatible with Amazon Alexa and Google Assistant, allowing for hands-free control.

Image: A woman is mopping a kitchen floor. On the wall, a black CNBINGO smart switch is visible. On the floor, an Amazon Echo Dot is shown. A speech bubble indicates the Echo Dot responding with "OK" to a voice command, implying successful voice control of the light switch.

• Konnessjoni mal-Assistenti tal-Vuċi: After pairing the switch with the Smart Life/Tuya app, open the Alexa or Google Home app. Enable the 'Smart Life' or 'Tuya Smart' skill/service and link your account.
• Kmandi bil-vuċi: Uża kmandi bħal:
  • "Alexa, turn on [Light Name]"
  • "Hey Google, turn off [Light Name]"
  • "Alexa, set [Light Name] to 50%" (if connected to a dimmable bulb and supported by the switch)

3. App Control (Remote, Scheduling, Multi-Control)

The Smart Life/Tuya app provides comprehensive control over your smart switch from anywhere with an internet connection.

Image: A split image. The top half shows a modern living room with a black smart switch on the wall. The bottom half shows a woman smiling while looking at her smartphone, which displays the Smart Life app interface for controlling a smart switch remotely.

• Kontroll mill-bogħod: Turn lights ON/OFF from anywhere using the app.
• Skedar u Timer: Set schedules for your lights to turn ON/OFF automatically at specific times, or create countdown timers.


Image: A split image demonstrating the schedule and timer function. The top half shows a house illuminated at 11:00 PM, suggesting lights turning on automatically. The bottom half shows a person sleeping peacefully, with a digital clock indicating 9:00 AM, implying lights turning off or adjusting at a scheduled morning time.

• Multi-Kontroll: Link multiple smart switches within the app to control a single light from various locations, simulating a 2-way or 3-way switch setup.


Image: This image demonstrates the multi-control feature. It shows two smart switches on a wall, both connected to a single light fixture. A smartphone displays the Smart Life app, illustrating how multiple switches can be linked to control one light simultaneously, effectively creating a virtual 2-way switch setup.

• Ħolqien tax-Xena: Create custom scenes to activate multiple devices with a single command or tap.
• Qsim tal-Familja: Aqsam il-kontroll tas-swiċċ intelliġenti mal-membri tal-familja permezz tal-app.

4. Blue LED Backlight

The switch features a subtle blue LED backlight that indicates its position in the dark, making it easy to locate at night.

Image: A bedroom scene at night. A black CNBINGO smart switch is mounted on the wall between two bedside lamps. The switch emits a soft blue LED light, highlighting its position in the dimly lit room for easy visibility.

Manutenzjoni

• Tindif: To clean the switch, gently wipe the glass panel with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the surface or internal components.
• Aġġornamenti tal-Firmware: Iċċekkja l-app Smart Life/Tuya perjodikament għal aġġornamenti tal-firmware disponibbli biex tiżgura prestazzjoni u sigurtà ottimali.
• Issolvi l-problemi: If the switch is not responding, try restarting it by turning off the power at the circuit breaker for a few seconds and then turning it back on.

Issolvi l-problemi

• Is-swiċċ ma jirrispondix għall-mess: Ensure power is supplied to the switch. If the LED indicator is off, check the circuit breaker. If the LED is on but unresponsive, try a power cycle (turn off/on at breaker).
• Ma tistax tikkonnettja mal-Wi-Fi:
  • Kun żgur li n-netwerk Wi-Fi tiegħek huwa 2.4 GHz. Netwerks ta' 5 GHz mhumiex appoġġjati.
  • Iċċekkja li l-password tal-Wi-Fi tiegħek hija korretta.
  • Move your router closer to the switch or ensure a strong Wi-Fi signal.
  • Reset the switch to pairing mode (LED blinks rapidly) and try pairing again.
• Lights flicker or do not turn off completely (without neutral wire): Ensure the capacitor is correctly installed across the L1 lamp. This is crucial for stable operation in non-neutral wire setups.
• Il-kontroll tal-vuċi mhux qed jaħdem:
  • Verify that the Smart Life/Tuya skill is enabled in your Alexa/Google Home app and linked to your account.
  • Ensure the device name in the Smart Life/Tuya app matches the name you are using for voice commands.
  • Iċċekkja l-konnessjoni tal-internet tiegħek.
• Multi-control not functioning: Ensure all switches intended for multi-control are correctly linked within the Smart Life/Tuya app.

Garanzija u Appoġġ

CNBINGO products are designed for reliability and performance. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact CNBINGO customer support through the contact information provided on the product packaging or the official CNBINGO website. Please have your model number (DS-1081WL-2B) and purchase details ready when contacting support.