EDM 33516

EDM Portable Air Conditioner Model 33516 User Manual

Model: 33516 | Brand: EDM

Introduzzjoni

Thank you for choosing the EDM Portable Air Conditioner Model 33516. This manual provides important information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and keep it for future reference.

Istruzzjonijiet Importanti dwar is-Sigurtà

  • Aqra l-istruzzjonijiet kollha qabel tuża l-apparat.
  • Tiżgura l-voltage indicated on the rating label matches your main power supply.
  • Tgħaddix l-apparat, korda, jew plagg fl-ilma jew likwidi oħra.
  • Issorvelja lit-tfal biex tiżgura li ma jilagħbux bl-apparat.
  • Neħħi l-plagg mill-iżbokk meta ma tkunx qed tuża u qabel it-tindif.
  • Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara, jew wara li l-apparat ma jaħdimx jew ikun ġie bil-ħsara b'xi mod.
  • Tużax barra.
  • Timblokkax il-fetħiet tal-arja.
  • Poġġi l-unità fuq wiċċ stabbli u ċatt.
  • Uża biss ilma nadif fit-tank tal-ilma.

Prodott Overview

The EDM Portable Air Conditioner Model 33516 is a compact evaporative air cooler designed for personal and ambient climate control. It features a removable water tank, three speed settings, and integrated wheels for easy mobility.

Quddiem view of the EDM Portable Air Conditioner Model 33516

Figura 1: Quddiem view of the EDM Portable Air Conditioner Model 33516. The unit is white and grey, with a front grille, control panel on top, and casters at the base.

Komponenti:

  • Panel tal-Kontroll (Fuq)
  • Air Outlet Grille (Front)
  • Water Tank (Bottom, removable)
  • Casters (Base)
  • Power Cord (Rear)
  • Air Inlet Filter (Rear/Side)

Setup Istruzzjonijiet

1. Żpakkjar u Tqegħid

  1. Oħroġ il-kondizzjonatur tal-arja mill-imballaġġ tiegħu bir-reqqa.
  2. Place the unit on a firm, level surface. Ensure there is at least 20 cm (8 inches) of clear space around the unit for proper airflow.

2. Mili tat-Tank tal-Ilma

For cooling and humidification, the water tank must be filled with clean water.

  1. Iġbed bil-mod it-tank tal-ilma 'l barra mill-qiegħ tal-unità.
  2. Imla t-tank b'ilma nadif tal-vit. Teċċedix il-linja tal-mili "MAX".
  3. Carefully slide the water tank back into the unit until it clicks into place. Ensure it is securely seated to prevent leaks.
Image showing the removable water tank being pulled out from the bottom of the air cooler.

Figura 2: The removable water tank located at the bottom of the unit, shown partially pulled out for filling or cleaning.

3. Using Ice Packs (Optional)

For enhanced cooling, you can use the provided ice packs (or standard ice cubes) in the water tank.

  1. Freeze the ice packs thoroughly before use.
  2. After filling the water tank (as described above), place the frozen ice packs directly into the water tank.
  3. Agħlaq it-tank tal-ilma sew.
Collage showing ice packs, the water tank, and the control panel of the air cooler.

Figura 3: Top left shows two blue ice packs next to the open water tank. These can be placed in the tank for colder air.

Istruzzjonijiet Operattivi

Ensure the unit is plugged into a 220-240V power outlet before operation.

Close-up of the control panel with buttons for Swing, Off, Low, Mid, High, and Cool functions.

Figura 4: Close-up of the control panel. Buttons include 'Swing ON/OFF', 'OFF', 'LOW', 'MID', 'HIGH' for fan speed, and 'Cool ON/OFF'.

Funzjonijiet tal-Panew tal-Kontroll:

  • MITFI: Itfi l-unità.
  • LOW / MID / HIGH: Selects the desired fan speed.
  • Swing ON/OFF: Activates or deactivates the automatic oscillation of the air outlet louvers.
  • Cool ON/OFF: Activates or deactivates the evaporative cooling function. This function requires water in the tank.

Operazzjoni Bażika:

  1. Qawwa Mixgħul: Press any of the speed buttons (LOW, MID, HIGH) to turn on the fan.
  2. Aġġusta l-Veloċità tal-Fan: Press the desired speed button (LOW, MID, HIGH).
  3. Attiva t-tkessiħ: Press the "Cool ON/OFF" button. The unit will begin evaporative cooling. Ensure the water tank is filled.
  4. Attiva t-Tbandil: Press the "Swing ON/OFF" button to enable the automatic oscillation of the air louvers. Press again to stop.
  5. Itfi: Press the "OFF" button to turn off the unit.

Manutenzjoni

Tindif u manutenzjoni regolari jiżguraw prestazzjoni ottimali u jestendu l-ħajja tal-arja kondizzjonata tiegħek.

1. Tindif tal-Estern

  • Dejjem aqla l-unità qabel tnaddaf.
  • Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
  • Kun żgur li ma jidħolx ilma fil-pannell tal-kontroll jew f'komponenti elettriċi oħra.

2. Tindif tat-Tank tal-Ilma

  • Spluggja l-unità.
  • Pull out the water tank (refer to Figure 2).
  • Vojta kwalunkwe ilma li jkun fadal.
  • Naddaf it-tank b'deterġent ħafif u laħlaħ sew b'ilma nadif.
  • Ħalli t-tank jinxef kompletament bl-arja qabel ma terġa' ddaħħalha fl-unità.
  • Naddaf it-tank tal-ilma regolarment (eż., kull ġimgħa) biex tevita t-tkabbir tal-moffa u l-mildew.

3. Cleaning the Air Filter (Evaporative Pad)

The air filter/evaporative pad is located behind the rear grille. It should be cleaned periodically.

  • Spluggja l-unità.
  • Remove the rear grille (consult diagram if available, or gently unclip).
  • Carefully remove the evaporative pad.
  • Rinse the pad under running water to remove dust and mineral deposits. For heavy deposits, soak in a mild descaling solution (e.g., vinegar and water) before rinsing.
  • Allow the pad to air dry completely before reinserting.
  • Reattach the rear grille.

4. Ħażna

  • If the unit will not be used for an extended period, empty and clean the water tank and evaporative pad thoroughly.
  • Kun żgur li l-partijiet kollha huma niexfa.
  • Aħżen l-unità f'post frisk u niexef, preferibbilment fl-ippakkjar oriġinali tagħha.

Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
L-unità ma tixgħel.Ebda provvista ta 'enerġija.
Il-korda tal-enerġija mhux imdaħħla sew.
Iċċekkja jekk l-unità hijiex imdaħħla f'sokit li jaħdem.
Żgura li l-korda tad-dawl tkun imqabbda sewwa.
No cool air / Weak cooling effect.It-tank tal-ilma huwa vojt.
"Cool" function is not activated.
Evaporative pad is dirty or dry.
L-umdità tal-kamra hija għolja wisq.
Imla t-tank tal-ilma.
Press the "Cool ON/OFF" button.
Clean or moisten the evaporative pad.
Evaporative coolers are less effective in high humidity. Consider ventilation.
Riħa spjaċevoli.Stagnant water or mold in the tank/pad.Empty and clean the water tank and evaporative pad thoroughly. Use fresh water.
Tnixxija tal-ilma.It-tank tal-ilma mhux imqiegħed sew.
Il-livell tal-ilma jaqbeż il-linja MAX.
Ensure the water tank is pushed in completely and securely.
Timliex iżżejjed it-tank tal-ilma.

Jekk il-problema tippersisti wara li tiċċekkja dawn il-punti, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

Speċifikazzjonijiet

Numru tal-Mudell33516
BrandEDM
TipApparat li Jkessaħ l-Ajru Evaporattiv li jista 'jinġarr
Qawwa80 W
Voltage220-240 V
Kapaċità tat-Tank tal-Ilma3.6 Litri
Veloċitajiet3 Speeds (Low, Mid, High)
Tip ta' KontrollButtuni
MaterjalPlastik
Dimensjonijiet (L x W x H)24 x 26 x 57 ċm (madwar)
Piż4.83 kg
Karatteristiċi SpeċjaliRemovable water tank, With wheels, Swing function
Livell ta' Storbju20 dB (tipiku)
Line drawing of the EDM Portable Air Conditioner with dimensions: 24cm depth, 26cm width, 57cm height.

Figura 5: Dimensional drawing of the unit, showing approximate measurements of 24 cm (depth), 26 cm (width), and 57 cm (height).

Garanzija u Appoġġ

For warranty information or technical support, please refer to the warranty card included with your product or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2024 EDM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.