User Manual: Tire Inflator Portable Air Compressor

Introduzzjoni

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new Portable Tire Inflator. Please read this manual thoroughly before using the device and retain it for future reference.

Istruzzjonijiet tas-Sigurtà

• Kun żgur li l-apparat ikun iċċarġjat kompletament qabel l-użu.
• Tħaddimx l-inflator ħdejn likwidi jew gassijiet fjammabbli.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.
• Avoid continuous operation for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
• Żarmax jew timmodifikax l-apparat.
• Aħżen f'post niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.

Kontenut tal-Pakkett

• Inflator tat-Tajers li jinġarru
• Tubu ta' l-inflazzjoni
• Cable tal-Iċċarġjar tal-USB
• 4 x Nozzles (for car, bike, ball, swimming ring)

Image: The portable tire inflator unit shown with its included accessories: an inflation hose, a USB charging cable, and four different nozzle adapters for various inflation needs.

Prodott Overview

Familiarize yourself with the components of your tire inflator:

• Wirja Diġitali: Shows current pressure, target pressure, and battery level.
• Pressure Unit Button (R): Short press to switch between BAR/PSI/KPA/KG/CM^2. Long press to turn off.
• Buttuni +/-: Adjust target pressure.
• Buttuna tal-Qawwa: Start/stop inflation.
• Dawl LED: Jipprovdi dawl f'kundizzjonijiet ta' dawl baxx.
• Inflation Port: Where the inflation tube connects.
• Port tal-Iċċarġjar tal-USB: Għall-iċċarġjar mill-ġdid tal-apparat.

Immaġni: Dettaljata view of the inflator's digital display, highlighting the pressure unit switch button (R) and the plus/minus buttons for adjusting the preset pressure.

Setup

1. Ħlas Inizjali: Before first use, fully charge the inflator using the provided USB cable. The digital display will indicate charging status. A full charge takes approximately 3-4 hours.
2. Attach Inflation Tube: Screw the inflation tube securely into the inflation port on the device.

Istruzzjonijiet Operattivi

General Inflation Steps:

1. Qabbad mal-Valv tat-Tajers: Screw the inflation tube's nozzle onto the tire valve stem. Ensure a tight connection to prevent air leakage.
2. Qawwa Mixgħul: The device typically powers on automatically when the inflation tube is connected or by pressing any button.
3. Agħżel Unità tal-Pressjoni: Short press the "R" button to cycle through pressure units (BAR, PSI, KPA, KG/CM^2) until your desired unit is displayed.
4. Issettja l-Pressjoni Mira: Use the "+" and "-" buttons to adjust the target pressure to the recommended value for your item (e.g., vehicle tire, bicycle tire, sports ball).
5. Ibda l-Inflazzjoni: Press the power button to begin inflation. The digital display will show the current pressure increasing.
6. Itfi Awtomatiku: The inflator will automatically stop when the preset target pressure is reached.
7. Skonnettja: Unscrew the inflation tube from the valve stem.
8. Itfi: Long press the "R" button to turn off the inflator.

Image: A step-by-step visual guide demonstrating the easy operation of the tire inflator, including connecting the hose, setting pressure, starting inflation, and the automatic shut-off feature.

Bl-użu tad-Dawl LED:

The built-in LED light can be activated to provide illumination during low-light conditions or nighttime use. Refer to the device's specific button for light activation (often a dedicated button or a long press of the power button).

Image: The tire inflator in use, with its integrated LED light illuminating the tire valve area, demonstrating its utility for nighttime or low-light inflation.

L-Użu ta' Żennuni Differenti:

The inflator comes with 4 extra nozzles for various applications:

• Needle Nozzle: For sports balls (e.g., basketballs, footballs).
• Tapered Nozzles: For inflatable toys, swimming rings, and other low-pressure inflatables.

Attach the appropriate nozzle to the inflation tube before connecting to the item to be inflated.

Image: An illustration detailing the four preset inflation modes available on the device, showing recommended PSI levels for car tires (36 PSI), motorcycles (33 PSI), bicycles (30 PSI), and balls (8 PSI).

Manutenzjoni

• Tindif: Imsaħ il-barra tal-inflator b'ċarruta ratba u damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
• Ħażna: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the inflation tube is neatly coiled.
• Kura tal-batterija: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically if not used for a long time.

Issolvi l-problemi

Speċifikazzjonijiet

• Isem tal-Mudell: ST-5007
• Pressjoni Operattiva Massima: 150 PSI
• Kapaċità tal-Fluss tal-Arja: 12 L / Min
• Batterija: 2 * 2000 mAh high-density USB rechargeable Lithium-ion batteries (included)
• Ħin tal-Iċċarġjar: 3-4 sigħat
• Ħin ta' Użu Kontinwu: Approximately 30 minutes (on full charge)
• Input Voltage: 12V (from internal battery)
• Livell ta' Storbju: 10 dB (as per specification, though typical operating noise might be higher)
• Piż tal-oġġett: 1.26 liri
• Dimensjonijiet: 8.39 x 6.26 x 2.64 pulzieri (Dimensjonijiet tal-Pakkett)

Garanzija u Appoġġ

Dan il-prodott jiġi ma 'a garanzija ta 'sena from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the seller or manufacturer through your purchase platform.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.