Introduzzjoni
The ONKRON TS1140-W TV Floor Stand is designed to securely hold televisions ranging from 26 to 65 inches, with a maximum weight capacity of 35 kg. This stand offers a versatile alternative to wall mounting, eliminating the need for drilling. It features height adjustability and integrated cable management for a clean setup.
Image: The ONKRON TS1140-W TV Floor Stand is compatible with TVs from 26 to 65 inches and supports a maximum weight of 35 kg.
Informazzjoni dwar is-Sigurtà
- Read all instructions thoroughly before assembly and use.
- Teċċedix il-kapaċità massima tal-piż ta' 35 kg (77 lbs).
- Ensure your TV's VESA mounting pattern is compatible (100x100mm to 400x400mm).
- Assemble the stand on a soft, clean surface to prevent scratches to components or flooring.
- Always use two people for lifting and mounting the television to prevent injury or damage.
- Ensure all screws are tightened securely before placing the TV on the stand and before use.
- For additional stability, especially in households with children or pets, consider attaching the stand to the wall using the provided safety cable.
- Żomm il-partijiet żgħar u l-materjali tal-ippakkjar 'il bogħod mit-tfal.
Kontenut tal-Pakkett
Please verify that all components listed below are present in your package. Refer to the image for a visual guide to the included parts and hardware.
Immaġni: Fuqview of all parts and hardware included in the ONKRON TS1140-W TV Floor Stand package.
- Bażi (1)
- Main Column (1)
- Brackets tal-Immuntar tat-TV (2)
- Hardware Kit (various screws, washers, spacers for TV mounting)
- Assembly Tools (wrenches, Allen keys)
- Cable Management System Components
- Kejbil tas-Sigurtà (1)
- Soft Inserts for TV protection
Istruzzjonijiet ta' Armar
- Attach the Base to the Main Column: Secure the base to the bottom of the main column using the provided screws and tools. Ensure all connections are firm and stable.
- Install TV Mounting Brackets: Attach the vertical TV mounting brackets to the main column. These brackets will serve as the attachment point for your television.
- Prepare Your TV:
- Poġġi t-TV tiegħek b'wiċċu 'l isfel bir-reqqa fuq wiċċ artab u nadif biex tevita li tagħmel ħsara lill-iskrin.
- Identifika t-toqob tal-immuntar tal-VESA fuq wara tat-TV tiegħek.
- Select the appropriate screws, washers, and spacers from the hardware kit that match your TV's VESA pattern and depth.
- Attach the TV mounting arms to the back of your TV. Ensure they are securely fastened but do not overtighten.
- Immonta t-TV mal-Stand:
- With assistance from another person, carefully lift the TV and hook the TV mounting arms onto the vertical brackets on the main column.
- Secure the TV to the stand using the locking screws or mechanisms provided.
- Gently test the stability of the mounted TV before releasing it.
- Ġestjoni tal-Kejbil: Route your TV cables through the integrated cable management system within the main column to maintain a tidy and organized appearance.
- Optional Wall Attachment: For enhanced stability and safety, especially in active environments or with heavier TVs, use the included safety cable to secure the top of the stand to a wall stud.
Istruzzjonijiet Operattivi
Aġġustament Għoli: The ONKRON TS1140-W TV Floor Stand offers height adjustment from 880 mm to 1100 mm. To adjust the TV height, carefully loosen the securing bolts on the main column. With assistance, gently raise or lower the TV to your desired viewing position, then securely tighten the bolts. Always ensure the TV is level after adjustment.
Image: The stand allows for height adjustment of the TV from 88 cm to 110 cm.
Manutenzjoni
- Regularly check all screws and connections to ensure they remain tight and secure. Loose connections can compromise stability.
- Clean the stand with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspect the stand periodically for any signs of wear, damage, or deformation. Do not use the stand if any damage is observed.
Issolvi l-problemi
- Stand is wobbly or unstable:
- Kun żgur li l-viti kollha tal-assemblaġġ huma ssikkati sew.
- Verify that the TV weight does not exceed the maximum capacity of 35 kg.
- Check that the stand is placed on a flat, level, and stable surface.
- Consider using the provided safety cable to anchor the stand to the wall for enhanced stability.
- TV does not fit the VESA mount:
- Confirm your TV's VESA mounting pattern is within the specified range of 100x100mm to 400x400mm.
- Ensure you are using the correct screws, washers, and spacers from the hardware kit that match your TV's specific requirements.
- Diffikultà biex taġġusta l-għoli:
- Loosen the height adjustment bolts sufficiently before attempting to move the TV.
- Ensure no cables are snagged or obstructing the movement mechanism within the column.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | TS1140-W |
| Brand | ONKRON |
| Daqsijiet tat-TV Kompatibbli | 26 - 65 pulzieri |
| Kapaċità massima tal-piż | 35 kg (77 lbs) |
| Kompatibilità VESA | 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Medda ta 'Aġġustament Għoli | 880 mm - 1100 mm (34.6 - 43.3 pulzieri) |
| Distanza mill-Ħajt | Madwar 60 mm (2.4 pulzieri) |
| Piż tal-oġġett | 21.4 liri (madwar 9.7 kg) |
| Kulur | Abjad |
| Manifattur | Evigor international Co., Limited |
| Data L-Ewwel Disponibbli | 10 ta’ Marzu, 2024 |
Image: The stand features universal VESA compatibility from 100x100mm to 400x400mm, with base dimensions of 61.8 cm width and 25.7 cm depth.
Garanzija u Appoġġ
ONKRON products undergo multi-stage quality control to ensure reliability and customer satisfaction. For any questions, assistance with assembly, missing parts, or support needs, please contact ONKRON customer service. Refer to your purchase documentation or the official ONKRON webis-sit għal dettalji speċifiċi tal-garanzija u informazzjoni ta' kuntatt.