Summer Infant 32194

Summer Infant Ingenuity Pop 'N Ride Lightweight Stroller Wagon

Mudell: 32194

Manwal ta' Istruzzjoni

Informazzjoni Importanti dwar is-Sigurtà

Read all instructions before assembly and use of the stroller wagon. Keep this manual for future reference. Failure to follow these instructions could result in serious injury or death.

  • This product is designed for children aged 6 months and older.
  • Maximum weight capacity: 50 pounds (22.7 kg) per seat. Do not exceed this limit.
  • Always secure children with the 3-point safety harness.
  • Ensure the wagon is fully open and locked before placing children inside.
  • Never leave children unattended in the wagon.
  • Do not use this product for purposes other than its intended use as a child transport wagon.
  • Avoid placing heavy bags or items on the handles as this may cause the wagon to tip.
  • The canopy provides UPF 50+ sun protection. Ensure it is properly positioned to shield children from direct sunlight.
  • This product is not compatible with car seats.
Image showing 3-point harness, safety brakes, removable UPF 50+ canopy, and a '3rd party safety tested and approved for baby' logo.

Figura 1: Safety features including the 3-point harness, foot-activated brakes, and the UPF 50+ canopy. The product has undergone third-party safety testing.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ.

  • Stroller Wagon Frame
  • Roti (4)
  • Kanupew Rimovibbli
  • Ġenitur Cupholder
  • Manwal ta' Istruzzjoni

Setup u Assemblea

  1. Tiftaħ il-Vagun: Place the folded wagon on a flat surface. Release any locking mechanisms. Pull the frame upwards and outwards until it clicks into its fully open position. Ensure all frame joints are securely locked.
  2. Twaħħil tar-Roti: Insert each wheel into its designated slot on the wagon frame until it clicks securely into place. Pull on each wheel to confirm it is firmly attached.
  3. Installazzjoni tal-Canopy: Attach the canopy support rods into the designated slots on the wagon frame. Extend the canopy fabric over the rods and secure it using any attached fasteners (e.g., Velcro, clips).
  4. Attaching the Cupholder: Clip the parent cupholder onto the desired location on the handle or frame.
Assembled Summer Infant Ingenuity Pop 'N Ride Lightweight Stroller Wagon with canopy.

Figura 2: The fully assembled stroller wagon, ready for use.

Istruzzjonijiet Operattivi

Pushing and Pulling

The Pop 'N Ride Stroller Wagon features height-adjustable handles for both pushing and pulling. To adjust the handle height, locate the adjustment buttons or levers on the handle and press/lift them while moving the handle to the desired position. Release to lock.

Image showing a person pushing the wagon and another person pulling the wagon, demonstrating the height-adjustable handles.

Figura 3: The wagon can be operated by pushing or pulling, utilizing the adjustable handles.

Securing Children

Each seat is equipped with a 3-point safety harness. Place the child in the seat, bring the harness straps over their shoulders and between their legs, then connect the buckles securely. Adjust the straps for a snug fit.

Close-up image of a hand securing a child with the 3-point safety harness in the wagon.

Figura 4: Detail of the 3-point safety harness being fastened.

Sistema tal-Ibbrejkjar

The wagon is equipped with foot-activated brakes on the rear wheels. To engage the brakes, press down firmly on the brake levers located near the wheels. To release, lift the levers upwards.

Image of a foot pressing down on the wheel brake mechanism of the wagon.

Figura 5: Engaging the foot-activated brake on a wheel.

Folding for Storage and Transport

To fold the wagon, ensure children and all items are removed. Release the canopy and any locking mechanisms on the frame. Follow the specific folding sequence (refer to diagrams on the product or quick-start guide if available) to collapse the wagon into a compact form. Secure with any integrated latches.

Image of the stroller wagon in its compact, folded position, standing upright.

Figura 6: The wagon in its compact, folded state, suitable for storage or transport.

A person loading the folded stroller wagon into the trunk of a car.

Figura 7: The compact folded size allows for easy placement in a vehicle trunk.

Storage Pockets and Cupholder

Utilize the integrated storage pockets for small items. The parent cupholder provides a convenient place for beverages.

Close-up image of the wagon's storage pocket containing small items.

Figura 8: The mesh storage pocket for carrying essentials.

Image showing a water bottle placed in the parent cupholder attached to the wagon handle.

Figura 9: The convenient parent cupholder.

Manutenzjoni u Kura

  • Tindif: The fabric components of the wagon should be hand washed only. Use mild soap and cold water. Do not bleach. Air dry thoroughly.
  • Tindif tal-qafas: Imsaħ il-komponenti tal-qafas tal-metall u tal-plastik b'adamp cloth and mild soap. Dry completely.
  • Manutenzjoni tar-roti: Periodically check wheels for debris and ensure they rotate freely. Clean as needed.
  • Ħażna: Store the wagon in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
  • Spezzjoni: Regularly inspect the wagon for loose fasteners, worn parts, or damaged materials. Do not use if any components are damaged.

Issolvi l-problemi

  • Wagon does not unfold/fold smoothly: Ensure all locking mechanisms are disengaged before attempting to fold or unfold. Check for any obstructions in the folding joints.
  • Wheels are difficult to turn: Inspect wheels for trapped debris (e.g., dirt, hair). Clean the wheel axles if necessary. Ensure wheels are properly attached.
  • Iċ-ċinga mhux qed tissikka sew: Check that the buckle components are aligned correctly and click firmly into place. Adjust straps for a snug fit.
  • Canopy not staying in place: Ensure the canopy support rods are fully inserted and any fasteners are securely attached.

Jekk tiltaqa' ma' problemi li mhumiex elenkati hawn jew teħtieġ aktar assistenza, jekk jogħġbok ikkuntattja lis-servizz tal-konsumatur.

Speċifikazzjonijiet

KaratteristikaDettall
Numru tal-Mudell32194
BrandTrabi tas-Sajf
Medda ta' Età6 months and up (Toddler)
Rakkomandazzjoni tal-Piż Massimu50 lbs (22.7 kg) per seat
Kapaċità ta 'bilqiegħda2 itfal
Tip ta' xedd3-Punt
KanupewRemovable, UPF 50+ Sun Protection
Tip ta' Materjal45% Metal, 40% Fabric, 15% Plastic
Materjal tal-qafasAluminju
Materjal tat-TajersLastiku
Piż tal-oġġett24.6 Lira (11.16 kg)
Dimensjonijiet tal-oġġett (L x W x H)41.34"T x 24.8"W x 45.67"Għ (105cm x 63cm x 116cm)
Daqs mitwi23.5" x 31" x 17" (59.7ċm x 78.7ċm x 43.2ċm)
Istruzzjonijiet tal-KuraAħsel bl-idejn biss
Image displaying the dimensions of the stroller wagon in both unfolded and folded states, along with the weight capacity per seat.

Figura 10: Key dimensions and weight capacity of the stroller wagon.

Informazzjoni dwar Garanzija

This Summer Infant Ingenuity Pop 'N Ride Lightweight Stroller Wagon is covered by a Garanzija Limitata ta '90 jum mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura taħt użu normali. Ma tkoprix ħsara kkawżata minn użu ħażin, inċidenti, modifiki mhux awtorizzati, jew xedd u kedd normali.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.

Appoġġ għall-Klijent

For further assistance, troubleshooting, or to inquire about warranty claims, please contact Summer Infant customer service. Refer to the product packaging or the official Summer Infant webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.

Meta tikkuntattja l-appoġġ, jekk jogħġbok żomm in-numru tal-mudell tiegħek (32194) u l-prova tax-xiri faċilment disponibbli.

© 2025 Summer Infant. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.