1. Introduzzjoni
Thank you for choosing the Hbada E3 Ergonomic Office Chair. This chair is designed to provide optimal comfort and support for extended periods of sitting, featuring advanced ergonomic adjustments. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your chair.
2. Informazzjoni dwar is-Sigurtà
- Toqgħodx fuq is-siġġu.
- Tużax is-siġġu bħala banketta.
- Kun żgur li l-boltijiet u l-viti kollha huma ssikkati sew qabel l-użu. Iċċekkja perjodikament u erġa' ssikka kif meħtieġ.
- Do not exceed the maximum weight capacity (typically 120 kg or 265 lbs, though not specified in provided data, this is a standard safety precaution).
- Żomm idejk u subgħajk 'il bogħod mill-partijiet li jiċċaqalqu waqt l-aġġustament.
- Uża s-siġġu fuq wiċċ livellat biex tevita li jinqaleb.
3. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ. Jekk xi partijiet huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
- Assemblaġġ tad-dahar
- Assemblaġġ tas-Sedil
- Serħan tar-ras
- Serħan tad-dirgħajn (Xellug u Lemin)
- Ċilindru tal-Lift tal-Gass
- Bażi tal-Istilla
- Roti (5 biċċiet)
- Hardware Kit (Screws, Allen Wrench)
4. Setup u Assemblea
Follow these general steps for assembly. Refer to the included graphical instructions for detailed diagrams.
- Attach the casters to the star base by pushing them firmly into the holes.
- Daħħal iċ-ċilindru tal-irfigħ tal-gass fit-toqba taċ-ċentru tal-bażi tal-istilla.
- Attach the armrests to the seat assembly using the provided screws.
- Qabbad id-dahar tas-serħan mal-assemblaġġ tas-sedil.
- Poġġi s-sedil u d-dahar immuntati fuq iċ-ċilindru tal-irfigħ tal-gass.
- Waħħal ir-ras mal-parti ta’ fuq tad-dahar tas-sodda.
Image: Overall dimensions of the Hbada E3 office chair, showing height, width, and depth measurements.
5. Istruzzjonijiet Operattivi u Aġġustamenti
The Hbada E3 chair offers multiple adjustment options for personalized comfort.
5.1. Aġġustament tal-Għoli tas-Siġġu
Biex taġġusta l-għoli tas-siġġu, iġbed il-lieva li tinsab taħt is-sedil 'il fuq waqt li tapplika jew tirrilaxxaasing body weight. Release the lever at the desired height.
5.2. Funzjoni ta' Mimdud
The chair features a 140-degree recline function. Use the recline lever (usually on the side) to unlock the backrest, lean back to your preferred angle, and then push the lever down to lock it in place.
Image: A person demonstrating the 140-degree recline function of the Hbada E3 chair.
5.3. Aġġustament ta 'Appoġġ Lumbari
The 3-zone lumbar support system provides comprehensive back protection. It can be adjusted in 8 directions, including inner/outer 40-degree rotation and a 14-degree buffer zone for optimal comfort and pressure relief.
Immaġni: Dettaljata view of the Hbada E3's adjustable 3-zone lumbar support system.
5.4. Aġġustament tad-Dirgħajn 3D
The 3D armrests offer versatile adjustments to support your arms and shoulders. They can be adjusted:
- Għoli: Up to 70mm (2.95 inches) vertically.
- Front/Back: Up to 50mm (1.65 inches) horizontally.
- Rotazzjoni: Up to 40 degrees inward or outward.
Image: Diagram illustrating the height, front/back, and rotational adjustments of the 3D armrests.
5.5. Aġġustament tas-Serħan tar-Ras 3D
The 3D headrest provides neck and head support and can be adjusted:
- Għoli: Up to 4.5cm vertically.
- Rotazzjoni: Up to 60 degrees.
- Mejjel: Up to 45 degrees.
Image: Diagram illustrating the height, rotation, and tilt adjustments of the 3D headrest.
5.6. Aġġustament tal-Fond tas-Sedil
Adjust the seat depth by up to 5cm to accommodate different leg lengths and ensure proper thigh support.
Image: Illustration of the 5cm seat depth adjustment mechanism.
5.7. Aġġustament tal-Għoli tad-Dahar
The backrest can be adjusted vertically by 7cm to align the lumbar support with your natural spine curvature.
Image: Diagram showing the 7cm vertical adjustment range for the backrest.
6. Manutenzjoni
Regular maintenance helps prolong the life of your chair.
- Tindif: Wipe mesh and plastic surfaces with a damp drapp u deterġent ħafif. Evita kimiċi ħarxa.
- Spezzjoni: Periodically check all screws and bolts for tightness and re-tighten as needed.
- Xandara: Żomm ir-roti ħielsa minn debris (xagħar, trab) biex tiżgura moviment bla xkiel.
- Lift tal-gass: Do not attempt to disassemble the gas lift cylinder.
7 Issolvi l-problemi
Jekk tiltaqa' ma' xi problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-siġġu ma jaġġustax l-għoli | Ħsara fiċ-ċilindru tal-irfigħ tal-gass jew il-lieva mhux attivata. | Kun żgur li l-lieva tal-aġġustament tal-għoli tinġibed għalkollox. Jekk il-problema tippersisti, il-lift tal-gass jista' jkollu bżonn jinbidel. Ikkuntattja l-appoġġ. |
| Ħsejjes ta' tgergir | Konnessjonijiet laxki jew frizzjoni bejn il-partijiet. | Iċċekkja u ssikka l-viti u l-boltijiet kollha. Applika ammont żgħir ta' lubrikant tas-silikon fuq il-partijiet li jiċċaqalqu jekk meħtieġ. |
| Is-siġġu jitbandal | Loose base connections or uneven floor. | Ensure the star base is securely attached and all casters are properly inserted. Check if the floor is level. |
If troubleshooting steps do not resolve the issue, please contact Hbada customer support.
8. Speċifikazzjonijiet
- Mudell: E3 (E301G-V3)
- Ditta: Hbada
- Backrest Style: Dahar tal-malja
- Tip ta' Materjal tas-Sedil: Malja
- Karatteristiċi Speċjali: Ergonomic, Lumbar Adjustment Function
- Użu Rakkomandat: Uffiċċju, Logħob
- Tip ta' Kamra: Uffiċċju
- Armrest Style: 3D Armrest
- Base Style: Rota
- Reclining Stages: 2 (Implied by 140-degree recline, usually lockable at upright and reclined)
- Kulur: White (Note: Product title mentions 'White', but images show grey/silver. Assuming 'White' refers to the frame/accents for this specific model variant.)
9. Garanzija u Appoġġ
Hbada hija impenjata li tipprovdi prodotti ta' kwalità għolja u servizz tal-konsumatur eċċellenti.
- Garanzija ta' sena: The product comes with a 3-year warranty service.
- Politika ta' Ritorn ta' 30 Jum: Enjoy a 30-day no-questions-asked return and exchange policy.
- Servizz tal-Klijent: For any initial defects, malfunctions, or inquiries, please contact our customer service center. We will provide free replacement parts.
Għal appoġġ, jekk jogħġbok irreferi għall-informazzjoni ta' kuntatt ipprovduta max-xiri tiegħek jew żur is-sit uffiċjali tal-Hbada websit.
10. Vidjows Uffiċjali tal-Prodott
No relevant official product videos with 'Seller' as creator type and m3u8 format were found in the provided data.