Manwal ta' Istruzzjoni

Prodott Overview

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the RSAG7.820.10462/ROH Power Supply and Main Board, compatible with HISENSE 58R6E3 (S/N: 58G21) televisions. This part has been tested to ensure functionality.

Immaġni: The RSAG7.820.10462/ROH Power Supply and Main Board. This image displays the full circuit board, highlighting various components such as USB ports, HDMI ports, audio/video input jacks, power supply capacitors, heat sinks, and the main processor area covered by a black heat spreader. The board is green with various electronic components soldered onto it, including resistors, capacitors, and integrated circuits. Markings like "COLD" and "HOT" indicate different sections of the power supply. A barcode and serial number are visible on the right side of the board.

Informazzjoni dwar is-Sigurtà

Always disconnect the television from the power source before attempting any installation or maintenance. Static electricity can damage electronic components; use anti-static precautions (e.g., anti-static wrist strap) when handling the board. If you are unsure about any step, consult a qualified technician.

Setup u Installazzjoni

This section outlines the steps for replacing or installing the main board.

1. Preparazzjoni:
   • Ensure the television is unplugged from the wall outlet.
   • Place the television face down on a soft, clean surface to prevent screen damage.
   • Iġbor l-għodda meħtieġa: tornavit Phillips, ċinga tal-polz anti-statika.
2. Accessing the Main Board:
   • Neħħi l-għatu ta' wara tat-televiżjoni billi tneħħi l-viti kollha li jżommuhom.
   • Carefully lift and set aside the back cover.
3. Disconnecting the Old Board (if applicable):
   • Identify all cables connected to the existing main board (e.g., power cables, ribbon cables, speaker cables, input/output cables).
   • Gently disconnect each cable. Note their positions for reassembly.
   • Unscrew the main board from the television chassis.
   • Carefully remove the old board.
4. Installazzjoni tal-Bord il-Ġdid:
   • Align the new RSAG7.820.10462/ROH board with the mounting holes in the television chassis.
   • Secure the board with the appropriate screws.
   • Reconnect all cables, ensuring they are firmly seated in their respective ports. Pay close attention to the orientation of ribbon cables.
5. Passi Finali:
   • Replace the television back cover and secure it with all screws.
   • Carefully return the television to its upright position.
   • Plug the television into a power outlet.

Istruzzjonijiet Operattivi

Once the main board is correctly installed, the television should power on normally. The main board manages all core functions of the television, including video processing, audio output, and input management.

• Qawwa Mixgħul: Press the power button on the television or remote control.
• Għażla tal-Input: Use the remote control to select the desired input source (HDMI, AV, USB, etc.).
• Kontroll tal-Funzjonalità: Verify that all ports (HDMI, USB, AV) and functions (picture, sound) are working as expected.

Manutenzjoni

The RSAG7.820.10462/ROH main board is designed for long-term reliability. Minimal maintenance is required.

• Tindif: Keep the television's ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the board.
• Ambjent: Operate the television in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.
• Żieda fl-enerġija: Consider using a surge protector to safeguard the television and its internal components from electrical fluctuations.

Issolvi l-problemi

If you encounter issues after installing the main board, refer to the following common problems and solutions:

Jekk dawn il-passi ma jsolvux il-problema, jista' jkun hemm bżonn ta' assistenza professjonali.

Speċifikazzjonijiet

Key specifications for the RSAG7.820.10462/ROH Power Supply and Main Board:

• Isem tal-Mudell: RSAG7.820.10462
• Apparati Kompatibbli: Television (specifically HISENSE 58R6E3)
• Tip ta 'Konnettur tal-Enerġija Prinċipali: 24-Pin
• Interface tal-Karta Grafika: PCI Express (Note: This refers to internal board architecture, not an external slot)
• Slots tal-Memorja Disponibbli: 2 (Internal to the board, not user-accessible)
• Numru ta' Portijiet: 3 (referring to specific types of ports)
• Total Ethernet Ports: 1
• Portijiet HDMI totali: 1
• Total PCI E- Ports: 1 (Internal to the board)
• Manifattur: ddc
• ASIN: B0CPJSVMMQ

Garanzija u Appoġġ

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the documentation provided with your purchase or contact the seller directly.

For technical support or assistance with installation and troubleshooting, please contact the seller or manufacturer through the platform where the product was purchased. Provide your product model number (RSAG7.820.10462) and purchase details for faster service.