RECOIL REQ7 7-Band Car Audio Equalizer User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL REQ7 7-Band Car Audio Parametric Graphic Equalizer. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

2. Karatteristiċi ewlenin

• 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer.
• Fully Adjustable -12 dB to +12 dB EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz and 16kHz).
• 2 channels of speaker level inputs & 6 channels of RCA outputs (front, rear, sub).
• Auxiliary stereo RCA input & front panel auxiliary stereo input.
• Separate level controls on front of EQ for convenience (master, sub, front/rear fader, main/auxiliary inputs).
• Exceptional 83 dB signal-to-noise performance.
• Extended frequency response from 20 Hz to 30 kHz.
• Vol Għolitage (Max Output Voltage 7V) Premium Tiffany RCA connectors.
• ISO mounting holes and removable trim ring for custom installation.
• Includes installation brackets and hardware.

3. Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin waqt l-installazzjoni u t-tħaddim:

• Skonnettja t-terminal negattiv tal-batterija tal-vettura qabel kwalunkwe xogħol elettriku.
• Ensure all wiring is correctly routed and secured to prevent damage or short circuits.
• Do not operate the unit in wet conditions or expose it to excessive moisture.
• Ikkonsulta installatur professjonali tal-awdjo tal-karozzi jekk m'intix ċert dwar xi passi tal-installazzjoni.
• Avoid adjusting audio settings while driving to maintain focus on the road.

4. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• RECOIL REQ7 Equalizer Unit
• Parentesi tal-Installazzjoni
• Ħardwer tal-Immuntar (viti, eċċ.)
• Power/Ground Wiring Harness
• Manwal għall-Utent (dan id-dokument)

5. Prodott Aktarview

5.1 Kontrolli ta' Front Panel

Image: Front panel of the RECOIL REQ7 equalizer, showing the seven EQ band controls, master volume, subwoofer level, fader, and auxiliary input.

• SUB LIVELL: Jaġġusta l-livell tal-ħruġ tal-kanal tas-subwoofer.
• VOLUM: Master volume control for all channels.
• AUX S/W: Switch to select between Main and Auxiliary input.
• AUX IN: 3.5mm stereo jack for auxiliary audio input.
• FADER: Jibbilanċja l-output awdjo bejn il-kanali ta' quddiem u ta' wara.
• EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz): Seven individual rotary controls to adjust the gain (-12dB to +12dB) for specific frequency ranges.

5.2 Konnessjonijiet tal-Panew ta' wara

Image: Rear panel of the RECOIL REQ7 equalizer, displaying RCA inputs (Main In, Aux In, Hi Input), RCA outputs (Front Out, Rear Out, Sub Out), and power connection.

• SUB OUT (L/R): RCA outputs for connecting to a subwoofer ampaktar ħaj.
• AUX IN (L/R): RCA inputs for auxiliary audio sources.
• HI INPUT (L/R): Speaker level inputs for connecting to a factory head unit without RCA outputs.
• MAIN IN (L/R): RCA inputs for the primary audio source (e.g., head unit).
• REAR OUT (L/R): RCA outputs for connecting to a rear channel ampaktar ħaj.
• FRONT OUT (L/R): RCA outputs for connecting to a front channel ampaktar ħaj.
• QAWWA: Connection terminal for power, ground, and remote turn-on wires.
• LOW PASS FREQUENCY Switch (90Hz/60Hz): Selects the low-pass crossover frequency for the subwoofer output.

6. Installazzjoni

Proper installation is crucial for optimal performance. If you are not comfortable with car audio wiring, seek professional assistance.

6.1 Immuntar

1. Choose a suitable mounting location that is dry, well-ventilated, and accessible for adjustments. The REQ7 is a 1/2 DIN size, allowing for flexible placement.
2. Use the provided mounting brackets and hardware to secure the equalizer. Ensure the unit is firmly attached to prevent vibration.
3. The removable trim ring can be used for custom installations to achieve a flush look.

6.2 Konnessjonijiet tal-Wiring

Refer to the diagram below for typical wiring connections.

Immaġni: Minn fuq għal isfel view of the RECOIL REQ7 equalizer, illustrating the various input and output connections for a car audio system.

• Power (RED wire): Connect to a fused +12V constant power source from the vehicle's battery.
• Ground (BLACK wire): Connect to a clean, solid chassis ground point in the vehicle. Ensure good metal-to-metal contact.
• Remote (BLUE wire): Connect to the remote turn-on output of your head unit or other switched +12V source. This turns the equalizer on/off with your audio system.
• Inputs tal-Awdjo:
  • RCA Inputs (MAIN IN / AUX IN): Qabbad il-kejbils RCA mill-pre- tal-unità ewlenija tiegħekamp outputs to the MAIN IN. Use AUX IN for additional RCA sources.
  • High Level Inputs (HI INPUT): If your head unit does not have RCA outputs, connect the speaker wires directly to the HI INPUT terminals.
• Audio Outputs (FRONT OUT / REAR OUT / SUB OUT): Connect RCA cables from these outputs to the corresponding inputs on your external ampliifikaturi.

7. Istruzzjonijiet Operattivi

7.1 Qawwa Inizjali

1. After completing all wiring, reconnect the vehicle's negative battery terminal.
2. Turn on your head unit. The REQ7 should power on automatically via the remote wire.
3. Start with all EQ bands at their center (flat) position, master volume low, and subwoofer level low.

7.2 Aġġustament tas-Settings tal-Awdjo

• Għażla tas-Sors: Uża l- AUX S/W switch to toggle between the MAIN IN (RCA from head unit) and AUX IN (front panel 3.5mm or rear RCA auxiliary inputs).
• Volum Master: Żid bil-mod il- VOLUM il-pum għal livell ta’ smigħ komdu.
• Livell tas-subwoofer: Aġġusta l- SUB LIVELL knob to blend the subwoofer output with the main speakers.
• FADER Control: Uża l- FADER knob to balance the sound between the front and rear speakers.
• Ekwalizzazzjoni: Aġġusta l-individwu Banda EQ controls (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz) to fine-tune the audio frequency response to your preference. Increase (+) to boost a frequency, decrease (-) to cut it.
• Iffiltra tal-Pass Baxx: Uża l- FREKWENZA TA' PASSA BAXXA switch on the rear panel to select the desired crossover point (60Hz or 90Hz) for the subwoofer output. This ensures only low frequencies are sent to the subwoofer.

8. Manutenzjoni

• Żomm l-unità nadifa u ħielsa mit-trab. Uża drapp artab u niexef għat-tindif.
• Tużax kimiċi ħarxa jew tindif li joborxu.
• Ensure all connections remain secure over time. Periodically check wiring for any signs of wear or corrosion.

9 Issolvi l-problemi

10. Speċifikazzjonijiet

11. Garanzija u Appoġġ

RECOIL products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RECOIL websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

For further assistance, you may contact RECOIL customer support through their official channels.