HPBS 5000A Portable Car Jump Starter with Air Compressor

Introduzzjoni

The HPBS 5000A Portable Car Jump Starter with Air Compressor is a multi-functional device designed for automotive emergencies and maintenance. It combines a powerful jump starter, a tire inflator, a power bank, and an LED flashlight into one compact unit, providing essential tools for vehicle owners.

Image: The HPBS 5000A Portable Car Jump Starter, showcasing its compact design and integrated components like the LCD display, control buttons, and jumper cable ports.

X'hemm fil-Kaxxa

Your HPBS Jump Starter package includes the following items:

• HPBS Jump Starter (x1)
• Smart Jumper Cables (x1)
• USB Charging Cable (without adapter) (x1)
• Trachea (air hose) (x1)
• Gas Nozzles (x3)
• EVA Storage Case (x1)
• Manwal għall-Utent (x1)

Image: All components included in the HPBS Jump Starter package, neatly arranged within and around its protective EVA storage case.

Karatteristiċi Ewlenin

• 5000A Peak Jump Starting Power: Capable of jump-starting 12V vehicles (up to 10.0L gas or 8.0L diesel engines) in 1-2 seconds, up to 35 times on a full charge.
• Intelligent 150 PSI Tire Inflation: Features tire pressure monitoring, preset value stop, and unit switching (BAR/PSI/KPA). Inflates a 225/60 R18 car tire in approximately 8 minutes.
• Powerful Mobile Power Bank: Equipped with USB outputs (5V/3A, 9V/2A, 12V/1.5A) and a Type-C input (5V/2A, 9V/2A) to charge various electronic devices.
• Display LCD: Provides clear real-time data including battery level, inflator mode, and tire pressure.
• Torċa LED b'ħafna modi: Includes flashlight, SOS, and strobe modes for illumination in dark or emergency situations.
• Protezzjonijiet tas-Sigurtà Multipli: Incorporates 10 built-in safety technologies (over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, reverse-charge) with advanced intelligent clamps.

Setup

Before first use, ensure the jump starter is fully charged. Connect the provided USB charging cable to the Type-C input port on the device and a suitable USB power adapter (not included). The LCD display will indicate the charging status. Once fully charged, disconnect the cable.

Image: The HPBS Jump Starter connected via USB-C, demonstrating its power bank functionality for charging mobile devices.

Istruzzjonijiet Operattivi

1. Startjar ta' Vettura b'Avvanz

1. Kun żgur li l-jump starter huwa ċċarġjat biżżejjed.
2. Insert the smart jumper cable plug firmly into the jump starter's output port.
3. Qabbad il- aħmar (+) clamp mat-terminal pożittiv (+) tal-batterija tal-vettura tiegħek.
4. Qabbad il- iswed (-) clamp to the negative (-) terminal of your vehicle's battery.
5. Start your car's engine.
6. Once the engine starts, immediately remove the jumper cables from the car battery, then disconnect the cables from the jump starter.

Image: A visual guide illustrating the three steps for jump-starting a vehicle: connecting the jump starter, attaching the clamps to the car battery, and starting the engine.

2. Inflazzjoni tat-Tajers

1. Take out the air pipe (trachea) and connect it to the inflator interface on the jump starter. Tighten it securely.
2. Press and hold the power button to turn on the machine.
3. Connect the air pipe to the tire valve. The LCD display will show the current tire pressure.
4. Short press the mode switch button to select the desired inflation mode (e.g., car, motorcycle, bicycle, ball).
5. Use the "+" and "-" keys to adjust the preset air pressure value.
6. Press the power/inflation start button to begin inflation. The device will automatically stop when the preset pressure is reached.
7. During inflation, you can short press the power button or inflation mode button to stop inflation manually.

Image: The HPBS Jump Starter connected to a car tire, demonstrating its tire inflation capability with the digital display showing pressure readings.

3. Funzjoni tal-Bank tal-Enerġija

To use the device as a power bank, simply connect your electronic device (e.g., smartphone, tablet) to the USB output port using a compatible USB cable. The jump starter will automatically begin charging your device.

4. Flashlight LED

Press the lighting button to cycle through the flashlight modes: constant on, SOS signal, and strobe. Press again to turn off the light.

Manutenzjoni

• Store the jump starter in its EVA storage case in a cool, dry place when not in use.
• Erġa' ċċarġja l-apparat kull 3-6 xhur, anke jekk ma jintużax, biex iżżomm il-batterija f'kundizzjoni tajba.
• Naddaf il-barra b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Inspect jumper cables and air hose for any damage before each use.

Issolvi l-problemi

Speċifikazzjonijiet

Image: A detailed diagram highlighting the various ports and controls on the HPBS Jump Starter, including the LED lighting, USB output, Type-C input, inflator interface, and display screen.

Garanzija u Appoġġ

HPBS stands behind the quality of its products. This jump starter comes with a Assigurazzjoni tal-kwalità tal-prodott għal sentejn. For any questions or assistance, please do not hesitate to contact HPBS customer service, available 7 ijiem fil-ġimgħa, 24 siegħa kuljum.

Contact information can typically be found in the included user manual or on the official HPBS websit.