Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter with DMW-DCC17 Type-C Dummy Battery User Manual

1. Introduzzjoni

This manual provides instructions for the safe and effective use of the Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter, specifically the variant including a DMW-DCC17 Type-C Dummy Battery. This device is designed to provide continuous power to various camera accessories and cameras from a single V-mount battery via D-Tap, enhancing portability and power management for photographic and videographic activities.

2. Prodott Aktarview

The Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter (Model WY-F550X2) is a versatile power solution. It features a dual-sided NP-F dummy battery design, a D-Tap input, and a Type-C output with Power Delivery (PD) functionality. This specific package includes a DMW-DCC17 Type-C Dummy Battery for compatible cameras.

2.1 Komponenti

• D-Tap to Dual-Sided NP-F Dummy Battery Adapter (Model WY-F550X2)
• Coiled D-Tap Cable
• Type-C to DMW-DCC17 Dummy Battery

2.2 Karatteristiċi ewlenin

• Dual-Sided NP-F Dummy Battery: Powers devices compatible with NP-F batteries, such as monitors, wireless receivers, LED video lights, and microphones.
• D-Tap Input: Connects to a V-mount battery for primary power supply.
• Type-C Output with PD: Provides power to an additional device, supporting 5V, 9V, or 12V output up to 36W.
• Integrated Protection Circuits: Built-in input/output reverse, high voltage, and overload protection for safe operation.
• Included DMW-DCC17 Dummy Battery: Allows compatible cameras to be powered directly from the adapter.

Figura 1: Aktarview of the Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter kit. This image shows the main NP-F adapter, the coiled D-Tap cable, and the DMW-DCC17 Type-C dummy battery.

Figure 2: The D-Tap to NP-F adapter, coiled cable, and DMW-DCC17 dummy battery laid out. This image highlights the individual components of the power solution.

3. Setup u Konnessjoni

Follow these steps to set up your Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter:

1. Qabbad mas-Sors tal-Enerġija: Insert the D-Tap connector of the coiled cable into a compatible D-Tap output port on a V-mount battery or power distribution plate. Ensure a secure connection.
2. Connect to NP-F Devices: Insert the dual-sided NP-F dummy battery adapter into the NP-F battery slot of your monitor, wireless receiver, LED video light, or microphone. The adapter can power two NP-F compatible devices simultaneously.
3. Connect to Camera (DMW-DCC17):
   • Connect the Type-C end of the DMW-DCC17 dummy battery cable to the Type-C output port on the NP-F adapter.
   • Insert the DMW-DCC17 dummy battery into the battery compartment of your compatible camera.
   • Close the camera's battery door, ensuring the cable passes through any designated cable exit.
4. Connect Additional Type-C Device (Optional): If needed, connect another Type-C powered device (e.g., a smartphone for charging) to the remaining Type-C output port on the NP-F adapter.

Important: Ensure all connections are firm before powering on any devices. Always connect the D-Tap cable to the power source last, and disconnect it first when powering down.

Figure 3: The D-Tap to NP-F adapter connected to a wireless receiver, demonstrating its use in a typical setup. The coiled cable provides flexibility.

Figura 4: Close-up view of the D-Tap to NP-F adapter showing the Type-C output port. This port can be used to power a camera via a Type-C dummy battery or other Type-C devices.

Figure 5: The flexible coiled D-Tap cable, which can extend up to 60cm, providing versatility in rigging.

4. Istruzzjonijiet Operattivi

Once all connections are made as described in the Setup section:

1. Qawwa Mixgħul: Turn on your V-mount battery or power source. The connected devices (monitor, wireless receiver, camera, etc.) should receive power.
2. Monitor Power Status: Observe the power indicators on your connected devices to confirm they are receiving power correctly.
3. Type-C Power Delivery: The Type-C output port supports Power Delivery (PD) and will automatically negotiate the appropriate voltage (5V, 9V, or 12V) with the connected device, up to 36W.
4. Itfi: To power down, first turn off all connected devices, then disconnect the D-Tap cable from the V-mount battery. Finally, disconnect the dummy batteries from your devices.

Note: Do not power the camera directly from the D-Tap input if the input voltage is 9V. In such cases, the NP-F output will be 7.8V, which is normal, but the Type-C output will only be 5V. Ensure your camera's power requirements are met by the Type-C output when using the DMW-DCC17 dummy battery.

5. Speċifikazzjonijiet

Figure 6: Detailed diagram illustrating the components and specifications of the Andoer D-Tap to NP-F adapter, including input/output ports and dimensions.

6. Manutenzjoni u Kura

• Keep the adapter and cables clean and dry. Avoid exposure to moisture or extreme temperatures.
• Tippruvax tiżżarma jew timmodifika l-apparat. Dan jista' jannulla l-garanzija u jikkawża ħsara.
• Aħżen l-apparat f'post frisk u niexef meta ma jkunx qed jintuża.
• Regularly inspect cables for any signs of wear or damage. Replace damaged cables immediately.

7 Issolvi l-problemi

8. Garanzija u Appoġġ

Andoer products are designed for reliability and performance. For warranty information and technical support, please refer to the official Andoer webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Għal aktar għajnuna, tista' żżur il- Andoer Store on Amazon.