MANHATTAN Ultra Slim Rigid TV Wall Mount (Model 461917) Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the safe and proper installation and use of your MANHATTAN Ultra Slim Rigid TV Wall Mount, Model 461917. This fixed wall mount is designed to securely hold large flat and curved screen televisions ranging from 60 to 120 inches, with a maximum load capacity of 120 kg (264 lbs). Please read all instructions carefully before installation to ensure optimal performance and safety.

2. Informazzjoni dwar is-Sigurtà

• Kapaċità tal-piż: Do not exceed the maximum load capacity of 120 kg (264 lbs). Exceeding this limit may result in serious injury or property damage.
• Daqs tal-iskrin: Dan il-muntatura huwa adattat għal televiżjonijiet bejn 60 u 120 pulzier.
• Struttura tal-Ħajt: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. Wood studs, solid concrete, or concrete block walls are recommended. Do not install on drywall alone.
• Installazzjoni professjonali: Jekk m'intix ċert dwar il-proċess tal-installazzjoni jew l-adegwatezza tal-ħajt tiegħek, ikkonsulta installatur professjonali kwalifikat.
• Għodod: Uża għodda xierqa għall-installazzjoni. Dejjem ilbes nuċċalijiet tas-sigurtà.
• Tfal: Żomm lit-tfal 'il bogħod miż-żona tal-installazzjoni.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-installazzjoni.

• Pjanċa tal-ħajt (1)
• Parentesi tat-TV (2)
• Hardware Kit (screws, washers, spacers, anchors)
• Clip-on Spirit Level (1)

Figura 1: Aktarview of the MANHATTAN Ultra Slim Rigid TV Wall Mount components, including the wall plate and two TV brackets.

4. Speċifikazzjonijiet

Figure 2: Illustration of VESA compatibility, showing the range from 50x50 to 900x600.

Figure 3: Detailed technical drawing displaying the dimensions of the wall mount.

5. Setup u Installazzjoni

5.1. Għodod Meħtieġa (Mhux Inklużi)

• Lapes
• Drill
• Finder Stud
• Tejp tal-Kejl
• Ċavetta tas-Sokit jew Ċavetta Aġġustabbli
• Tornavit tar-ras Phillips

5.2. Attaching TV Brackets to the TV

1. Poġġi t-TV tiegħek b'attenzjoni wiċċu 'l isfel fuq wiċċ artab u nadif biex tevita li l-iskrin isir ħsara.
2. Identifika t-toqob tal-immuntar tal-VESA fuq wara tat-TV tiegħek.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. The pull straps should hang freely below the TV.

Figura 4: Close-up view of the quick-release spring lock mechanism on the TV bracket, designed for easy installation and removal.

5.3. Mounting the Wall Plate to the Wall

1. Determine the desired height for your TV. Mark the center point on the wall.
2. Use a stud finder to locate at least two adjacent wood studs. Mark their centers. For concrete walls, ensure you use appropriate concrete anchors (included).
3. Position the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use the included clip-on spirit level to ensure the wall plate is perfectly horizontal.
4. Mark the drilling points through the wall plate holes.
5. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the chosen lag bolts/anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly, but do not overtighten.

Figure 5: The included clip-on spirit level helps ensure precise horizontal alignment during wall plate installation.

5.4. Iddendel it-TV

1. With assistance, carefully lift the TV (with brackets attached) and align the TV brackets with the wall plate.
2. Waħħal il-parentesi tat-TV mat-tarf ta’ fuq tal-pjanċa tal-ħajt.
3. Gently lower the TV until the quick-release spring locks engage, securing the TV to the wall plate. You should hear an audible click.
4. Pull the release straps to ensure the locks are engaged and the TV is securely mounted.

Figura 6: Eżample of a television securely mounted to the wall using the MANHATTAN Ultra Slim Rigid TV Wall Mount.

6. Operazzjoni

Once installed, the MANHATTAN Ultra Slim Rigid TV Wall Mount provides a fixed, low-profile position for your television. To remove the TV from the wall mount:

1. Locate the pull straps hanging below the TV.
2. Pull both straps downwards simultaneously to disengage the quick-release spring locks.
3. With assistance, carefully lift the TV off the wall plate.

7. Manutenzjoni

• Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa. Evita prodotti tat-tindif jew solventi li joborxu.
• Kontroll Perjodiku: Iċċekkja perjodikament il-viti u l-boltijiet kollha biex tiżgura li jibqgħu ssikkati u mwaħħlin sew.
• Ħsara: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.

8 Issolvi l-problemi

• TV Mhux Livell: Ensure the wall plate was installed horizontally using the spirit level. If not, remove the TV, adjust the wall plate, and re-mount.
• TV Not Engaging Locks: Ensure the TV brackets are correctly aligned with the wall plate and that no cables are obstructing the locking mechanism. Pull the straps to confirm engagement.
• Il-Muntanja Tħossha Instabbli: Immediately remove the TV. Re-check all wall plate fasteners and ensure they are securely anchored into studs or appropriate concrete. Do not re-mount the TV until stability is confirmed.

9. Garanzija u Appoġġ

This MANHATTAN product is covered by a Manufacturer Guarantee. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official MANHATTAN website. For technical support or assistance with installation, please contact MANHATTAN customer service.

MANHATTAN Customer Support: Please refer to your product packaging or the MANHATTAN websit għal informazzjoni ta' kuntatt attwali.