EVTSCAN Soil Tester User Manual

Introduzzjoni

This manual provides detailed instructions for the proper use and maintenance of your EVTSCAN Soil Tester. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolonged product life. This device is designed for measuring soil temperature, air temperature, air humidity, and illumination levels in various environments such as plants, gardens, lawns, and farms.

Prodott Overview

The EVTSCAN Soil Tester is a portable device designed for quick and accurate environmental measurements. It features a clear display, easy-to-use buttons, and a durable probe.

Figura 1: Quddiem view of the EVTSCAN Soil Tester.

Karatteristiċi ewlenin:

• Faċli biex tużah: Obtain test results quickly by inserting the probe into the soil.
• Kejl preċiż: Designed for precise readings of environmental conditions.
• Funzjoni tas-Serratura tad-Data: A dedicated HOLD button allows for convenient data viewing.
• Disinn portabbli: Compact and lightweight for easy transport and use in various locations.
• Applikazzjoni versatili: Suitable for family plants, gardens, lawns, and farms.

Setup

Installazzjoni tal-batterija:

1. Sib il-kompartiment tal-batterija fuq wara tal-apparat.
2. Iftaħ l-għatu tal-kompartiment tal-batterija.
3. Remove any packaging from the included 9V 6F22 dry battery.
4. Daħħal il-batterija ta' 9V, waqt li tiżgura li l-polarità tkun korretta.
5. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

Figura 2: Il-post tal-kompartiment tal-batterija.

Note: The device will not power on until the battery is correctly installed and any protective film is removed from the battery terminals.

Istruzzjonijiet Operattivi

Kontrolli tal-Apparat:

Figure 3: Control buttons on the EVTSCAN Soil Tester.

• Buttuna ON/OFF:
  • Short press to turn the device on.
  • Long press for 3 seconds to turn the device off.
  • The device will automatically turn off after 15 minutes of inactivity to conserve battery life.
• Buttuna ℃/℉:
  • Press this button to switch the temperature unit between Celsius (℃) and Fahrenheit (℉).
• Buttuna ŻOMM:
  • Press this button to lock the current readings on the display. This is useful for recording data.
  • Press again to release the data lock and resume live readings.

Teħid tal-Kejl:

1. Turn on the device by short pressing the ON/OFF buttuna.
2. Insert the metal probe into the soil to approximately 2/3 of its length (about 14-15 cm or 5.5-6 inches). Ensure the probe is fully inserted into the root zone for accurate soil readings.
3. Position the device to face the sun for accurate illumination readings.
4. Wait a few moments for the readings to stabilize on the display. The display will show soil temperature, air temperature, air humidity, and illumination.
5. Jekk mixtieq, agħfas il- ŻOMM button to lock the displayed data for easier recording.
6. After use, gently remove the probe from the soil.

Figure 4: Probe length and recommended insertion depth.

Figura 5: Eżample of readings on the display.

Speċifikazzjonijiet

Manutenzjoni

• Tindif: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. Do not immerse the main body of the device in water.
• Ħażna: Store the soil tester in a dry, cool place away from direct sunlight and extreme temperatures.
• Sostituzzjoni tal-batterija: If the display becomes dim or the device does not power on, replace the 9V battery. Ensure proper disposal of old batteries according to local regulations.
• Evita l-Impatt: Handle the device with care to prevent damage to the probe or internal components.

Issolvi l-problemi

Garanzija u Appoġġ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EVTSCAN websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.