Valera Swiss Excellence Smart Hair Clipper Instruction Manual

1. Introduzzjoni

The Valera Swiss Excellence Smart Hair Clipper is a professional-grade tool designed for precise hair and beard trimming. Developed and manufactured in Switzerland, this clipper offers reliability, accuracy, and sustainability. It features 46mm Durablade blades, 5 cutting levels, and comes with 6 spacing combs for versatile styling.

Image 1.1: Valera Swiss Excellence Smart Hair Clipper with its packaging, showcasing the product's design and included accessories.

2. Istruzzjonijiet tas-Sigurtà

Please read all safety warnings and instructions carefully before using this appliance. Keep this manual for future reference.

• Standard safety warnings for hair trimmers apply.
• Tgħaddix l-apparat fl-ilma jew likwidi oħra.
• Żomm l-apparat 'il bogħod mit-tfal.
• Kun żgur li l-korda tad-dawl ma ssirx ħsara qabel l-użu.
• Tużax l-apparat jekk ix-xfafar ikunu bil-ħsara, għax dan jista' jikkawża korriment.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is for hair and beard trimming only.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Valera Swiss Excellence Smart Hair Clipper
• 46mm Durablade (pre-installed)
• 6 Spacer Combs (3mm, 6mm, 9mm, 12mm, 16mm, 20mm)
• Adapter tal-Enerġija/Kejbil tal-Iċċarġjar
• Pinzell tat-tindif
• Żejt Lubrikanti
• Manwal ta' Istruzzjoni

Image 3.1: The six included attachment combs (3, 6, 9, 12, 16, and 20 mm) for various cutting lengths.

4. Prodott Aktarview

Familiarize yourself with the components of your Valera Swiss Excellence Smart Hair Clipper.

Image 4.1: The Valera Swiss Excellence Clipper, highlighting its dual functionality as a hair clipper and beard trimmer.

• Blade Unit: Features 46mm Durablade blades made of Japanese diamond-ground steel.
• Cutting Length Adjustment Lever: Allows for 5 precise cutting levels (0.8, 1.3, 1.8, 2.4, 3.0mm) without an attachment comb.
• Buttuna tal-Qawwa: Turns the clipper on and off.
• Dawl Indikatur tal-Iċċarġjar: Juri l-istatus tal-batterija.
• Port tal-Iċċarġjar: Għall-konnessjoni tal-adapter tal-enerġija.

Immaġni 4.2: Stampa dettaljata view of the clipper's blade unit, showing the "DURA BLADE JAPAN STEEL" marking and the blade change mechanism.

Image 4.3: A close-up of the Dura Blade, emphasizing the Japanese steel and precision engineering.

5. Setup

5.1 Iċċarġjar inizjali

Before first use, fully charge the clipper. Connect the power adapter to the charging port on the clipper and plug it into a 100-240V power outlet. The charging indicator light will show the charging status. A full charge provides up to 120 minutes of cordless operation.

5.2 Attaching and Removing Spacer Combs

1. Kun żgur li l-klipper ikun mitfi.
2. Select the desired spacer comb (3, 6, 9, 12, 16, or 20mm).
3. Align the comb with the clipper head and slide it on until it clicks into place.
4. To remove, gently push the comb upwards from the back and slide it off.

6. Istruzzjonijiet Operattivi

6.1 Tixgħel/Jitfi

Press the power button once to turn the clipper on. Press it again to turn it off.

6.2 Aġġustament tat-Tul tat-Tqattigħ

• Without Spacer Comb: Use the cutting length adjustment lever on the clipper body to select one of the 5 precise cutting levels: 0.8mm, 1.3mm, 1.8mm, 2.4mm, or 3.0mm.
• With Spacer Comb: Attach the desired spacer comb. The comb determines the primary cutting length, and the adjustment lever can fine-tune the length within the comb's range (e.g., for blending).

6.3 Cordless and Corded Operation

The clipper can be used cordless after charging or directly connected to a power outlet for corded operation, providing flexibility during use.

Image 6.1: The Valera Swiss Excellence Smart Hair Clipper in an upright position, ready for use.

7. Manutenzjoni

7.1 Tindif tax-Xfafar

1. Turn off the clipper and disconnect it from the power source if applicable.
2. Remove any attached spacer comb.
3. Use the provided cleaning brush to remove hair clippings from the blades and the clipper head.
4. For thorough cleaning, the blade unit can be detached. Refer to the "Blade Change" marking on the clipper for instructions on detaching and reattaching the blade unit.

7.2 Lubrikazzjoni tax-Xfafar

After every few uses or after cleaning, apply a small drop of the provided lubricating oil to the blades. Turn the clipper on for a few seconds to distribute the oil evenly. This ensures optimal cutting performance and extends blade life.

7.3 Ħażna

Store the clipper in a dry place, away from direct sunlight and extreme temperatures. Ensure the blades are clean and oiled before storing for extended periods.

8 Issolvi l-problemi

Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

9. Speċifikazzjonijiet

• Numru tal-Mudell: 53000119
• Materjal tax-xafra: Japanese Diamond-Ground Steel (Durablade)
• Wisa' tax-xafra: 46mm
• Cutting Levels (without comb): 0.8mm, 1.3mm, 1.8mm, 2.4mm, 3.0mm
• Spacer Combs Included: 3mm, 6mm, 9mm, 12mm, 16mm, 20mm
• Mutur: Professional DC motor with high torque
• Sors tal-Enerġija: Battery Powered (Li-Ion LFP), Corded Electric (100-240V)
• Ħajja tal-batterija: Up to 120 minutes (cordless operation)
• Tip ta 'batterija: 1 batterija tal-jone tal-litju (inkluża)
• Kulur: Iswed
• Piż tal-oġġett: Madwar 1.3-il Lira
• Manifattur: Ligo Electric SA

10. Garanzija

Valera products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or contact Valera customer support. Typically, a standard manufacturer's warranty covers defects in materials and workmanship from the date of purchase.

11. Appoġġ

For further assistance, product inquiries, or technical support, please contact Valera customer service. You can also visit the official Valera store for more information and resources.

Manifattur: Ligo Electric SA

Valera Store: Visit the Valera Store on Amazon