Informazzjoni Importanti dwar is-Sigurtà
- Always use caution when handling sharp blades.
- Keep guide combs away from water when not in use or during cleaning.
- These combs are not suitable for use on children without adult supervision.
- Follow all instructions for changing and cleaning guide combs to prevent injury.
Prodott Overview
The oneisall Replacement Guide Combs (Model PJ05038) are designed specifically for use with the oneisall DTJ-001 clipper. This set provides six different comb sizes, allowing for precise control over hair length during trimming.
- Is-sett jinkludi: 6 guide combs
- Daqsijiet: 3mm, 6mm, 9mm, 12mm, 18mm, 24mm
Figura 1: Aktarview of the six guide comb sizes and their application for various hair lengths.
Istruzzjonijiet għall-installazzjoni
To attach a guide comb to your oneisall DTJ-001 clipper:
- Ensure the clipper is turned off and unplugged from its power source for safety.
- Select the desired guide comb size (e.g., 3mm, 6mm, 9mm, 12mm, 18mm, or 24mm).
- Align the comb with the clipper blade. The comb should slide onto the blade assembly smoothly from the front.
- Gently push the comb down until it clicks securely into place. Do not force the comb, as this may cause damage.
To remove a guide comb:
- Kun żgur li l-klipper ikun mitfi u skonnettjat.
- Grip the comb firmly and gently pull it upwards and away from the clipper blade until it detaches.
Figure 2: Proper method for attaching a guide comb to the clipper.
Istruzzjonijiet Operattivi
Once a guide comb is securely attached to your oneisall DTJ-001 clipper, you can begin trimming. The comb acts as a guard, ensuring a consistent cutting length. Always refer to your DTJ-001 clipper's instruction manual for detailed operating procedures and safety guidelines specific to the clipper itself.
- Ensure the clipper blade is clean and properly oiled before each use for optimal performance.
- Hold the clipper with the comb flat against the hair, moving it smoothly against the direction of hair growth to achieve an even cut.
- If you are unsure about the desired hair length, start with a longer comb size and gradually switch to shorter combs as needed.
Manutenzjoni u Tindif
Regular cleaning of your guide combs is essential for hygiene, to ensure optimal performance, and to extend their lifespan.
- After each use, remove the guide comb from the clipper.
- Use a small brush (often included with clippers) to remove any trapped hair or debris from the comb's teeth and interior.
- The combs can be rinsed under running water. Use mild soap if necessary.
- Ensure the combs are completely dry before storing them or reattaching them to the clipper. Moisture can lead to damage or rust on clipper blades.
- Store combs in a clean, dry place, preferably in their original packaging or a dedicated storage case.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Guide comb does not fit the clipper. | The guide combs (Model PJ05038) are specifically designed for the oneisall DTJ-001 clipper. They may not be compatible with other clipper models, even from the same brand. | Verify that your clipper is the oneisall DTJ-001 model. If it is a different model, these combs are not compatible. |
| Comb is difficult to attach or remove. | Incorrect alignment, debris obstructing the attachment mechanism, or comb is not fully dry. | Ensure the comb is correctly aligned with the clipper blade. Check for any hair or debris in the attachment area and clean if necessary. Ensure the comb is completely dry. Do not force the comb. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Prodott | Replacement Guide Combs |
| Brand | oneisall |
| Compatible Clipper Model | DTJ-001 |
| Item Model Number (Combs) | PJ05038 |
| Number of Combs | 6 |
| Comb Sizes | 3mm, 6mm, 9mm, 12mm, 18mm, 24mm |
| Kulur | Iswed |
| Użu Rakkomandat | Tirqim |
| Kompatibilità tat-Tip ta' Xagħar | Kollha |
Garanzija u Appoġġ
oneisall products are designed for durability and performance. For any inquiries or assistance, please refer to the following:
- Garanzija: These guide combs are covered by a 2-Year Warranty.
- Appoġġ: 24/7 customer support is available for assistance.
- For detailed warranty terms and to contact support, please visit the official oneisall website or refer to the documentation included with your oneisall DTJ-001 clipper.