Satechi 200W 6-Port GaN Charging Station User Manual

Introduzzjoni

The Satechi 200W 6-Port GaN Charging Station is designed to provide efficient and fast charging for multiple USB-C powered devices simultaneously. Utilizing advanced GaN technology, this charging station offers a compact design with high power output and integrated safety features.

X'inhu Inkluż

• Satechi 200W 6-Port GaN Charging Station
• 3-Pin Power Connector (C5 power cable)
• Stand tad-Desktop
• Manwal għall-Utent

Karatteristiċi tal-Prodott

• Teknoloġija tal-Iċċarġjar Mgħaġġel: Equipped with GaN chip technology, delivering up to 140W from a single port, enabling faster charging than standard chargers.
• Safety-First Design: CE and ETL certified with over-current, over-heat, and over-voltage protection. Operates at a normal temperature of approximately 40°C (104°F).
• Faċli għall-ivvjaġġar: Compact and lightweight design minimizes clutter, making it suitable for travel.
• Setup konvenjenti: Includes a 4.9ft (1.49m) C5 power cable, a small stand, and rubber feet for stability.

Vidjows tal-Prodott

Setup

1. Unpack the Satechi 200W 6-Port GaN Charging Station, power cable, and desktop stand from the packaging.
2. Connect the 3-pin power connector (C5 power cable) to the designated port on the back of the charging station.
3. Ipplaggja t-tarf l-ieħor tal-kejbil tal-enerġija f'sokit tal-ħajt.
4. Place the charging station into the provided desktop stand for vertical orientation, or lay it flat on a stable surface. Ensure the rubber feet are in contact with the surface to prevent sliding.
5. The LED indicator on the top of the charging station will illuminate, indicating it is powered on and ready for use.

Istruzzjonijiet Operattivi

The Satechi 200W 6-Port GaN Charging Station features six USB-C Power Delivery (PD) ports. The power output varies depending on the specific port used and the number of devices connected simultaneously. Always use certified charging cables (sold separately) for optimal performance.

Power Schematic

Nota: Il-portijiet PD1 & PD2 biss se jilħqu rati ta 'ċċarġjar ta' 140W b'apparat ospitanti ta 'appoġġ. Apparat wieħed biss jista 'jiġi konness kull darba ma' kwalunkwe port sabiex jinkiseb iċċarġjar ta '140W.

Manutenzjoni

• Żomm l-istazzjon tal-iċċarġjar nadif u ħieles mit-trab. Uża drapp artab u niexef għat-tindif.
• Evita li tesponi l-apparat għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.
• Do not attempt to disassemble or modify the charging station, as this will void the warranty and may cause damage.

Issolvi l-problemi

• Apparat mhux qed jiċċarġja: Ensure the power cable is securely connected to both the charging station and the wall outlet. Verify that the device's charging cable is properly inserted into the charging station and the device.
• Iċċarġjar bil-mod: Check the power output table to ensure the connected device is compatible with the port's wattage. Using multiple high-power devices simultaneously may distribute the total wattage, potentially reducing individual port speeds.
• Is-sħana żejda: The charging station is designed to operate at a normal temperature of around 40°C. If it feels excessively hot, disconnect all devices and the power cable, and allow it to cool down. Ensure adequate ventilation around the unit.

Speċifikazzjonijiet

• Dimensjonijiet tal-Prodott: 4.13 x 4.13 x 1.38 pulzieri
• Piż tal-oġġett: 1.37 liri
• Input Voltage: 100-240 Volt (AC)
• Portijiet USB totali: 6 (USB Tip Ċ)
• Qawwa tal-Ħruġ Totali: 200W Max
• Ħruġ ta 'Port Uniku: PD1/PD2 (140W Max), PD3/PD4 (100W Max), PD5/PD6 (20W Max)
• Karatteristika Speċjali: GaN Technology, Over-current Protection, Over-heat Protection, Over-voltage Protezzjoni
• Apparati Kompatibbli: MacBook Pro 14/16-inch (M5/M4/M3/M2/M1), MacBook Air 13/15-inch (M5/M4/M3/M2/M1), iPad Pro 11/13-inch (M5/M4/M3/M2/M1), iPad Air 11/13-inch (M3/M2/M1), iPad Mini (A17 Pro/6), iPad (A16/10th Gen), iPhone 17/16/15/14/13/12 series, Apple Watch, AirPods, Galaxy series, Pixel series, Windows laptops (Dell, Lenovo, Microsoft Surface, etc.)

Garanzija u Appoġġ

Satechi products are covered by a 2-year limited warranty against defects in materials and workmanship under normal use. For customer support or warranty claims, please refer to the contact information provided in your product packaging or visit the official Satechi websit.