Boompods Neutron Solar Powerbank 10000 mAh User Manual

Introduzzjoni

This manual provides essential instructions for the safe and efficient use of your Boompods Neutron Solar Powerbank. Please read this manual thoroughly before using the device.

The Boompods Neutron Solar Powerbank is a robust, portable charging solution designed to keep your mobile devices powered on the go. Featuring a 10,000 mAh battery capacity, it offers both traditional USB charging and supplementary solar charging capabilities. It is also equipped with a built-in flashlight and is designed to be splash-proof (IPX4).

Kontenut tal-Pakkett

• Boompods Neutron Solar Powerbank
• Cable tal-Iċċarġjar tal-USB-C
• Ċinga tal-Velkro
• Manwal għall-Utent

Apparat Matulview

Familiarize yourself with the key components of your power bank.

Immaġni: Fuq view of the Boompods Neutron Solar Powerbank, highlighting the solar panel and the green solar charging indicator light.

Immaġni: Ġenb view of the Boompods Neutron Solar Powerbank, showing the protective cover over the USB ports.

1. Panel Solari: For supplementary charging via sunlight.
2. Buttuna tal-Qawwa: Activates the power bank and flashlight.
3. Indikaturi LED: Four blue LEDs show battery charge level. One green LED indicates solar charging activity.
4. Portijiet tal-Ħruġ USB-A (x2): Għall-iċċarġjar ta' apparati esterni.
5. Port tad-Dħul USB-C: Għall-iċċarġjar tal-power bank.
6. Flashlight: Dawl LED integrat għall-illuminazzjoni.
7. Protective Port Cover: Covers USB ports for splash resistance.
8. Attachment Slot: For securing the power bank with a strap.

Setup

Iċċarġjar Inizjali

Before first use, fully charge the power bank using the included USB-C cable and a compatible USB wall adapter (not included).

1. Open the protective port cover.
2. Connect the USB-C cable to the power bank's USB-C input port.
3. Qabbad it-tarf l-ieħor tal-kejbil ma 'sors ta' enerġija USB.
4. The blue LED indicators will blink to show charging progress. All four blue LEDs will be solid when fully charged.

A full charge via USB-C typically takes approximately 7 hours.

Istruzzjonijiet Operattivi

Iċċarġjar ta 'Tagħmir Estern

1. Open the protective port cover.
2. Connect your device's charging cable to one of the power bank's USB-A output ports.
3. Qabbad it-tarf l-ieħor tal-kejbil mat-tagħmir mobbli tiegħek.
4. The power bank should automatically begin charging your device. If not, press the power button once.
5. The blue LED indicators will show the remaining battery level.

Iċċarġjar Solari

The integrated solar panel provides supplementary charging. It is designed for emergency use and to maintain charge, not as a primary charging method due to its lower power output (max 1 Watt).

1. Poġġi l-power bank bil-pannell solari jħares lejn ix-xemx diretta.
2. A green LED indicator will light up when sufficient sunlight is detected and solar charging is active.
3. The blue LED indicators will blink to show charging progress.

For optimal solar charging, ensure the panel is clean and exposed to direct, strong sunlight. Solar charging is significantly slower than wall charging.

Uża l-flashlight

1. Press and hold the power button for approximately 2-3 seconds to turn the flashlight ON.
2. Press the power button once to cycle through brightness modes (bright, dim).
3. Press the power button again to activate SOS mode (flashing).
4. Press the power button again to activate Strobe mode.
5. Press and hold the power button again for 2-3 seconds to turn the flashlight OFF.

Image: The Boompods Neutron Solar Powerbank with its integrated flashlight illuminated, demonstrating its utility in low-light conditions.

Manutenzjoni

• Keep the power bank dry and clean. Wipe with a soft, dry cloth.
• Avoid extreme temperatures and direct heat sources.
• Żarmax jew tipprova ssewwi l-apparat.
• Ensure the protective port cover is securely closed when not in use to maintain splash resistance.
• Regularly check the solar panel for dirt or obstructions that may hinder charging efficiency.

Issolvi l-problemi

Il-power bank mhux qed jiċċarġja:

• Ensure the USB-C cable is securely connected to both the power bank and the power source.
• Ipprova kejbil USB-C jew adapter tal-ħajt differenti.
• Iċċekkja li s-sors tal-enerġija huwa attiv.
• For solar charging, ensure direct sunlight and a clean solar panel. Note that solar charging is significantly slower than wall charging.

L-apparat mhux qed jiċċarġja mill-power bank:

• Ensure the power bank has sufficient charge (check blue LED indicators).
• Press the power button once to activate output.
• Try a different USB-A output port.
• Ipprova kejbil tal-iċċarġjar differenti għat-tagħmir tiegħek.
• Ensure your device is compatible with 5V USB charging.

Il-flashlight mhux qed jaħdem:

• Kun żgur li l-power bank għandu biżżejjed ċarġ.
• Press and hold the power button for 2-3 seconds to activate.

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

This Boompods product is covered by a manufacturer's warranty. For details regarding warranty terms, duration, and claims, please refer to the warranty card included in your product packaging or visit the official Boompods websit. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għas-servizz tal-garanzija.

Visit Boompods Official Websit

Appoġġ

If you encounter any issues or have questions not covered in this manual, please contact Boompods customer support.

Websit: www.boompods.com/support

Email: Irreferi għall- websit għall-email ta' kuntatt.

Telefon: Irreferi għall- websit għal numru tat-telefon tal-kuntatt.