MeetLeisure Outdoor Swivel Rocker Patio Chairs with Side Table User Manual

Informazzjoni dwar is-Sigurtà

TWISSIJA: This product requires assembly. Always follow the assembly instructions carefully to ensure stability and safety.

Maximum weight capacity is 300 lbs per chair. Exceeding this limit may cause the chair to tip or break, leading to injury.

Spezzjona regolarment il-boltijiet u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati.

Do not stand on the chairs or side table.

Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-assemblaġġ.

Kontenut tal-Pakkett

Before assembly, ensure all parts listed below are present. If any parts are missing or damaged, contact customer support.

• 2 x Swivel Rocker Chairs
• 1 x Tabella tal-ġenb
• Cushions (seat and back)
• Assembly Hardware (screws, washers, wrench)

Nota: Specific part labels (e.g., Part A, Part B) are referenced in the assembly video.

Istruzzjonijiet ta' Armar

Assembly is required for the MeetLeisure Outdoor Swivel Rocker Patio Chairs and Side Table. It is recommended to have two people for assembly.

Għodod Meħtieġa: Included Allen wrench.

Importanti: Do not fully tighten screws until all parts are loosely assembled. This allows for proper alignment.

Assemblea tal-President

Follow the steps outlined in the assembly video for detailed visual guidance.

1. Begin by identifying the main frame components of the chair.
2. Attach the backrest to the seat frame using the provided screws and washers. Ensure the arms are horizontally placed and parts A & B incline to the demonstrated angle as shown in the video.
3. Secure the armrests to the seat and backrest. Use short screws and washers (8, 13) for the top connections and short screws and washers (11, 13) for the lower connections.
4. Connect the swivel base to the chair frame. Four washers and bolts (12, 13, 14, 15) are needed for this step.
5. Once all components are loosely connected, gradually tighten all screws evenly to ensure stability.

Assemblaġġ tal-Mejda tal-Ġenb

The side table assembly is straightforward.

1. Attach the legs to the tabletop.
2. Secure the lower shelf between the legs.
3. Issikka l-viti kollha.

Istruzzjonijiet Operattivi

Funzjoni Swivel

The chairs feature a 360-degree swivel base. To rotate, simply shift your weight or gently push off the ground with your feet in the desired direction.

Funzjoni tat-tbandil

The chairs are designed with a gentle rocking motion. Lean back and forth to engage the rocking mechanism.

Side Table Usage

The side table provides a convenient surface for drinks, books, or other small items. The lower shelf offers additional storage.

Immaġni: This image illustrates the side table's storage capacity and a person enjoying the rocking motion of the chair.

Kura u Manutenzjoni

Cleaning the Wicker Frame

Wipe the resin wicker frame with a soft cloth dampened with mild soap and water. Rinse thoroughly and dry completely to prevent water spots.

Kura tal-kuxxin

The cushions are made from premium Olefin fabric. Spot clean with a mild detergent and water. For deeper cleaning, remove covers if possible and follow care instructions on the label. Allow cushions to air dry completely before use or storage.

Store cushions indoors during inclement weather or prolonged periods of non-use to extend their lifespan and prevent fading.

Immaġni: Detail of the durable, all-weather resin wicker.

Immaġni: Detail of the premium beige Olefin fabric used for the cushions.

Kura Ġenerali

Cover the furniture set when not in use for extended periods to protect it from environmental elements.

Periodically check and tighten all bolts and screws to ensure the furniture remains stable and safe.

Issolvi l-problemi

Chairs are wobbly after assembly.

Soluzzjoni: Ensure all bolts are tightened evenly. If you tightened them fully during initial assembly, loosen them slightly, adjust the chair to sit flat, then re-tighten all bolts.

Swivel/rocking motion is not smooth.

Soluzzjoni: Check for any obstructions under the base. Apply a silicone-based lubricant to the moving parts of the swivel/rocker mechanism if needed.

Cushions appear faded.

Soluzzjoni: While Olefin fabric is fade-resistant, prolonged direct sun exposure can cause some fading over time. Store cushions indoors or cover the furniture when not in use to minimize exposure.

Speċifikazzjonijiet tal-Prodott

Immaġni: Detailed product dimensions for the chair (31"W x 30"D x 32"H) and side table (20"W x 20"D x 22"H).

Immaġni: Highlights comfort and durability features such as 5-inch thick cushions, 4-inch wide ergonomic armrests, and top-notched PE rattan.

Informazzjoni dwar Garanzija

For specific warranty details, please refer to the warranty card included with your product packaging or contact MeetLeisure customer support directly.

Typically, warranties cover manufacturing defects under normal use. Damage resulting from improper assembly, misuse, or neglect may not be covered.

Appoġġ għall-Klijent

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact MeetLeisure customer support.

Bejjiegħ: Newlancy

Amazon Store: MeetLeisure Store on Amazon

Please have your model number (Meetleisure) and purchase date available when contacting support.