ONKRON Mobile TV Stand TS1991-B User Manual

Introduzzjoni

This manual provides detailed instructions for the assembly, operation, and maintenance of your ONKRON Mobile TV Stand, model TS1991-B. Designed for screens ranging from 50 to 100 inches and supporting up to 265 lbs, this stand offers height adjustment, tilting capabilities, and mobility for various environments. Please read this manual thoroughly before installation and use to ensure safe and correct operation.

The ONKRON Mobile TV Stand TS1991-B supports VESA patterns from 200x200 to 1000x600 and can hold TVs up to 265 lbs.

Informazzjoni dwar is-Sigurtà

• Kapaċità tal-piż: Do not exceed the maximum weight capacity of 265 lbs (120 kg) for the TV and 11 lbs (5 kg) for the AV shelf. Overloading can cause instability and potential injury.
• Daqs tal-iskrin: This stand is designed for screens between 50 and 100 inches. Using screens outside this range may affect stability and functionality.
• Assemblea: Kun żgur li l-komponenti kollha huma mwaħħlin sew skont l-istruzzjonijiet. Immuntar mhux xieraq jista' jwassal għal ħsara fil-prodott.
• Moviment: Always unlock the casters before moving the stand. Move the stand slowly and carefully, especially on uneven surfaces. Lock the casters once the stand is in its desired position.
• Tfal u Pets: Keep children and pets away from the TV stand during assembly and when moving it. Do not allow them to climb on or play with the stand.
• Pjazzament: Place the stand on a flat, stable surface. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
• Ġestjoni tal-Kejbil: Route all cables neatly to prevent tripping hazards and damage to the cables or equipment.

Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, ivverifika li l-partijiet kollha elenkati hawn taħt huma preżenti u mhux imħassra. Jekk xi partijiet huma neqsin jew imħassra, tipproċedix bl-assemblaġġ u kkuntattja l-appoġġ għall-klijenti.

Illustration of all parts and hardware included in the TS1991-B package.

Komponenti ewlenin:

• Qafas Bażi
• Vertical Columns (2)
• Brazzi tal-Immuntar tat-TV
• AV Shelf
• Blata tal-Kamera
• Casters (4, with locking mechanism)

Kitt tal-Ħardwer:

Includes various screws, washers, spacers, and wrenches for assembly and TV attachment. Refer to the detailed parts diagram in the packaging for specific quantities and sizes.

Setup Istruzzjonijiet

Follow these steps carefully for proper assembly. It is recommended to have at least two people for certain steps, especially when mounting the TV.

Pass 1: Waħħal ir-Roti mal-Bażi

Secure the four casters to the base frame using the provided hardware. Ensure that the locking casters are positioned correctly for easy access.

Step 2: Assemble Vertical Columns

Connect the vertical columns to the base frame. Ensure they are aligned and securely fastened with the designated bolts.

Step 3: Install TV Mounting Brackets

Attach the TV mounting brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the VESA pattern matches and the brackets are centered.

Step 4: Mount TV to the Stand

Carefully lift the TV and hook the mounting brackets onto the vertical columns of the stand. Secure the TV in place using the safety screws or locking mechanisms provided.

Step 5: Attach AV Shelf and Camera Shelf

Install the AV shelf at your desired height on the vertical columns. The camera shelf can be attached to the top of the TV mounting assembly.

The stand features a camera shelf, convenient cable management, and a power strip holder for an organized setup.

Gwida tal-Vidjo tal-Assemblea

Istruzzjonijiet Operattivi

Aġġustament Għoli

The TV stand allows for height adjustment from 48.6 inches to 66.2 inches. To adjust the height, locate the spring-loaded pins on the vertical columns. Press and hold the pins, then carefully raise or lower the TV to the desired height. Release the pins to lock the TV in position. Ensure both sides are adjusted evenly.

Adjust the TV height between 48.6 and 66.2 inches for optimal viewing.

Funzjoni ta' inklinazzjoni

The TV mount offers a tilt range of +5° to -5°. To adjust the tilt, loosen the tilt adjustment knobs or bolts on the TV mounting brackets, set the desired angle, and then securely tighten the knobs/bolts. This allows for glare reduction and improved viewangoli.

Nimxu l-Istand

The stand is equipped with four rubberized casters for easy mobility. To move the stand, unlock all four casters by disengaging their locking mechanisms. Gently push the stand to its new location. Once in place, engage the locking mechanisms on all casters to prevent unintended movement.

Maneuverable wheels with locking system ensure stability and easy movement. The adjustable shelf supports up to 11 lbs.

Using the AV Shelf and Camera Shelf

The adjustable AV shelf can hold devices up to 11 lbs, such as laptops, media players, or gaming consoles. The upper camera shelf is designed to accommodate a webcam or small conferencing camera.

Ġestjoni tal-Cable

Utilize the integrated cable channels and the power strip holder at the back of the stand to route and conceal cables. This helps maintain a clean and organized appearance and prevents cable damage.

Manutenzjoni

• Tindif: Imsaħ l-istand b'ċarruta ratba, damp drapp. Evita li tuża prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
• Iċċekkja tal-Qafliet: Iċċekkja l-boltijiet u l-viti kollha perjodikament biex tiżgura li jibqgħu ssikkati. Erġa' ssikkahom jekk meħtieġ.
• Spezzjoni tal-Caster: Ensure casters are free of debris and roll smoothly. Lubricate if needed.

Issolvi l-problemi

Issue: Stand is difficult to move.

• Soluzzjoni: Ensure all casters are unlocked. Check for any obstructions around the wheels. Clean any debris from the casters.

Issue: TV appears unstable or wobbly.

• Soluzzjoni: Verify that all TV mounting screws and safety mechanisms are securely fastened. Ensure the stand is on a flat, level surface and casters are locked. Check that the TV weight does not exceed the stand's capacity.

Issue: Height adjustment mechanism is stuck.

• Soluzzjoni: Ensure the spring-loaded pins are fully depressed when attempting to adjust. Check for any foreign objects obstructing the vertical columns. Do not force the adjustment.

Speċifikazzjonijiet

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

The ONKRON Mobile TV Stand TS1991-B comes with a garanzija ta 'sena against defects in materials and workmanship. This warranty covers normal use and does not apply to damage resulting from misuse, accidents, modifications, or unauthorized repairs. Please retain your proof of purchase for warranty claims.

Appoġġ għall-Klijent

For any questions regarding assembly, operation, troubleshooting, or warranty claims, please contact ONKRON customer support. Our specialists are ready to assist you.

Żur il- ONKRON Store on Amazon għal aktar informazzjoni u għażliet ta' kuntatt.