1. Introduzzjoni
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your IBO Magi 2 25-60/180 High-Efficiency Circulation Pump. Please read these instructions carefully before installation and use, and keep them for future reference.
2. Prodott Aktarview
The IBO Magi 2 25-60/180 is a high-efficiency centrifugal circulation pump designed for various heating and circulation systems. It features a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump's power to meet the system's actual demands. The control panel is conveniently located on top of the motor, displaying current power consumption for easy monitoring.
The MAGI series circulation pump is ideally suited for the following systems:
- Constant temperature heating systems with variable flow.
- Heating systems with variable pipe temperature.
- Heating systems with night mode.
- Air conditioning systems.
- Industrial circulation systems.
- Central heating and domestic hot water systems.
Figura 2.1: Ġenerali view of the IBO Magi 2 25-60/180 Circulation Pump.
3. Komponenti Inklużi
Meta tiftaħ il-pakkett, kun żgur li l-komponenti kollha li ġejjin huma preżenti:
- IBO Magi 2 25-60/180 Circulation Pump
- Kit twaħħil bil-kamin
- Gaskits
- Kejbil tal-enerġija bil-plagg
Figure 3.1: Included screw fittings and gaskets.
Figure 3.2: Power cable with plug.
4. Setup u Installazzjoni
Installation should be performed by a qualified professional in accordance with local regulations and safety standards.
4.1. Immuntar tal-Pompa
- Kun żgur li s-sistema tkun mingħajr pressjoni u mbattla qabel l-installazzjoni.
- Immonta l-pompa f'pożizzjoni orizzontali bix-xaft tal-mutur orizzontali.
- Use the provided screw fittings and gaskets to connect the pump to the piping system. Ensure a watertight seal.
- Observe the flow direction indicated by the arrow on the pump housing.
4.2. Konnessjoni Elettrika
- Connect the provided power cable to the pump's electrical terminal.
- Kun żgur li l-provvista tal-enerġija taqbel mal-volum nominali tal-pompatage (230 V/50 Hz).
- Ipplaggja l-kejbil tal-enerġija f'sokit elettriku adattat bl-ert.
- Verify all electrical connections are secure and insulated.
5. Modi Operattivi
The IBO MAGI 2 circulation pump offers several operating modes, accessible via the control panel on top of the motor. The current power consumption is displayed on the dial.
Figure 5.1: Control panel displaying operating modes and power consumption.
Available operating modes:
- Modalità Awtomatika: Automatically selects pump parameters based on installation requirements.
- Proportional Pressure Curves: BL1, BL2 (adjusts head proportionally to flow).
- Constant Pressure Curves: HD1, HD2 (maintains a constant differential pressure).
- Constant Speed Characteristics: HS1, HS2, HS3 (operates at a fixed speed).
Refer to the control panel interface for selecting and adjusting these modes according to your system's needs.
6. Manutenzjoni
Regular maintenance ensures optimal performance and extends the lifespan of your circulation pump. Always disconnect the pump from the power supply before performing any maintenance.
6.1. Spezzjoni Ġenerali
- Periodically check for any leaks around the pump and connections.
- Inspect the power cable for signs of damage or wear.
- Ensure the pump is free from excessive dirt or debris.
6.2. Tindif
If necessary, clean the exterior of the pump with a damp drapp. Tużax tindif jew solventi li joborxu.
6.3. System Flushing
Ensure the heating or circulation system is regularly flushed to prevent the buildup of sludge and debris, which can affect pump performance.
7 Issolvi l-problemi
Qabel ma tikkuntattja l-appoġġ tekniku, review il-kwistjonijiet komuni li ġejjin u s-soluzzjonijiet potenzjali tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-pompa ma tibdax | Ebda provvista ta 'enerġija | Check power connection, fuse, and circuit breaker. |
| Il-pompa taħdem imma l-ebda fluss | Arja fis-sistema | Bleed the system to remove air. |
| Fluss jew pressjoni mnaqqsa | Clogged impeller or piping | Inspect and clean the impeller and system piping. |
| Ħoss mhux tas-soltu | Arja fil-pompa jew fis-sistema | Bleed the system. Check for cavitation. |
| Tnixxija | Loose connections or damaged gaskets | Tighten connections or replace gaskets. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja persunal tas-servizz kwalifikat.
8. Speċifikazzjonijiet
| Parametru | Valur |
|---|---|
| Mudell | MAGI 2 25-60/180 |
| Vol ikklassifikattage | 230V/50Hz |
| Konsum tal-Enerġija | 5-45 W |
| Max Rata tal-Fluss | 55 Litri kull minuta |
| Max Head (Height of lift) | 6-il metru |
| Pressjoni Operattiva Massima | 10 bar |
| Temperatura operattiva | +2 °C / +110 °C |
| Port-to-Port Distance | 180 mm |
| Dijametru tal-Konnessjoni | 1 1/2" - 1" |
| Indiċi tal-Protezzjoni | IP44 |
| Dimensjonijiet (L x W x H) | 20 x 20 x 15 ċm |
| Piż | 2.98 kg |
| Manifattur | PHU Dambat |
9. Informazzjoni dwar Garanzija
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for any warranty claims.
10. Appoġġ u Kuntatt
For technical assistance, spare parts, or further inquiries, please contact your retailer or the manufacturer directly. Ensure you have your product model number (MAGI 2) and purchase details available when seeking support.
Manufacturer: PHU Dambat
Websit: www.dambat.pl