Andoer Smartphone Vlog Kit Instruction Manual

1. Prodott Aktarview

The Andoer Smartphone Vlog Kit is designed to enhance your mobile video recording experience. It includes essential accessories for improved lighting, audio, and stability.

Figure 1: Assembled Andoer Smartphone Vlog Kit

X'inhu Inkluż:

Figure 2: Individual components of the kit

• Mini LED Video Light: Features 36 bright LED beads, 5600K color temperature, and dimmable brightness. Requires 2 x AA batteries (not included).
• Cardioid Microphone: Condenser microphone with foam muff to reduce background noise.
• Klipp tat-Telefon li Jista' Jiġi Estendut: Adjustable from 6cm to 11cm, compatible with most smartphones, with soft slip-proof pads.
• Sturdy Tripod: 10cm mini tripod that can be used on a desktop or folded into a handle grip.
• Kontroll mill-bogħod mingħajr fili: For convenient remote operation.
• 3.5mm TRS to TRRS Audio Cable: For connecting the microphone to a smartphone.

2. Setup

2.1 Assembling the Tripod and Phone Clip

1. Extend the tripod legs to form a stable base for desktop use, or keep them folded to use as a handheld grip.
2. Attach the extendable phone clip to the top of the tripod by screwing it onto the 1/4-inch screw mount. Ensure it is securely tightened.
3. Adjust the phone clip width to securely hold your smartphone (6cm to 11cm). The soft pads protect your device.

Figure 3: Tripod with 180° rotatable head and phone clip.

2.2 Twaħħil tad-Dawl tal-Vidjo LED

1. Open the battery compartment on the back of the LED video light and insert 2 x AA batteries (not included), ensuring correct polarity. Close the compartment.
2. Slide the LED video light onto one of the cold shoe mounts available on the phone clip or tripod. Tighten the locking wheel to secure it.

2.3 Attaching the Cardioid Microphone

1. Slide the cardioid microphone onto another available cold shoe mount on the phone clip or LED light. Tighten the locking wheel.
2. Connect the 3.5mm TRS to TRRS audio cable from the microphone to your smartphone's audio jack. If your smartphone does not have a 3.5mm jack, an adapter (not included) may be required.

Figure 4: Cardioid Microphone components.

2.4 Wireless Remote Control Setup

The wireless remote control connects via Bluetooth. Refer to your smartphone's Bluetooth settings to pair the remote for remote photo/video capture.

3. Istruzzjonijiet Operattivi

3.1 LED Video Light Operation

1. Press and hold the power button on the back of the LED light to turn it on/off.
2. Press the power button repeatedly to cycle through the dimmable brightness levels.

Figure 5: Dimmable brightness settings of the LED light.

3.2 Cardioid Microphone Usage

Once connected to your smartphone, the microphone will capture audio directly. Ensure the microphone is pointed towards the sound source for optimal performance. The foam muff helps reduce wind noise and plosives.

3.3 Tripod and Phone Clip Adjustments

The tripod head can be rotated 180 degrees by pressing the red button on the side, allowing for various shooting angles. The phone clip can also be rotated to switch between horizontal and vertical phone orientations.

Figure 6: Kit used as a tripod and handheld grip.

3.4 Kontroll mill-bogħod mingħajr fili

After pairing via Bluetooth, use the remote to start/stop video recording or capture photos without touching your phone, reducing camera shake.

Figure 7: Wireless Remote Control in use.

4. Manutenzjoni

• Keep all components clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
• Remove batteries from the LED light when not in use for extended periods to prevent leakage.
• Aħżen il-kit f'post frisk u niexef 'il bogħod mix-xemx diretta.
• Avoid dropping or subjecting the kit to strong impacts.

5 Issolvi l-problemi

• Microphone not working with iPhone 15 (or similar models): Newer iPhone models may require a Lightning to 3.5mm Headphone Jack Adapter (for older models) or a USB-C to 3.5mm Headphone Jack Adapter (for newer models) to connect the microphone. Ensure the adapter is compatible with external microphones.
• LED Light not turning on: Check if the AA batteries are inserted correctly and are not depleted. Replace with fresh batteries if necessary.
• Remote Control not connecting: Ensure Bluetooth is enabled on your smartphone and the remote is in pairing mode. Refer to your phone's Bluetooth settings to re-pair.

6. Speċifikazzjonijiet

Figure 8: Dimensions of key components.

7. Vidjows Uffiċjali tal-Prodott

8. Garanzija u Appoġġ

For warranty information and customer support, please refer to the product packaging or contact Andoer customer service directly. Keep your purchase receipt for any warranty claims.