Introduzzjoni
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampJekk jogħġbok aqrah bir-reqqa qabel l-użu u żommu għal referenza futura.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Informazzjoni dwar is-Sigurtà
Biex tiżgura tħaddim sikur u tevita ħsara, jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin:
- Użu fuq ġewwa biss: Dan lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Sigurtà Elettrika: Tiżgura l-lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Twissija tas-Sħana: Il-lamp and its contents become hot during operation. Do not touch the glass or base while the lamp ikun mixgħul jew immedjatament wara li jintefa. Ħalli biżżejjed ħin biex jiksaħ.
- Pjazzament Stabbli: Poġġi l-lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Żomm 'il bogħod mit-Tfal u l-Annimali Domestiċi: Due to the heat generated, keep the lamp fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
- Ventilazzjoni: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- Kurdun bil-ħsara: Jekk il-korda tal-enerġija tkun bil-ħsara, għandha tiġi sostitwita mill-manifattur jew aġent tas-servizz kwalifikat biex jiġu evitati perikli.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti meta tiftaħ il-pakkett:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Setup
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Ippakkja: Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
- Installazzjoni tal-bozza: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Attach Cap: Place the decorative cap onto the top of the glass vessel.
- Pożizzjoni Lamp: Poġġi l-l immuntatamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- Qabbad l-Enerġija: Ipplaggja l-korda tal-enerġija f'sokit elettriku standard ta' 120-volt.
Istruzzjonijiet Operattivi
Operating your Jambo Liquid Motion Lamp hija sempliċi:
- Ixgħel: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Ħin tat-tisħin: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Tul tat-Tħaddim: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Itfi: Biex itfi l-lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Manutenzjoni
Proper care will ensure the longevity and performance of your lamp:
- Tindif: Tiżgura l-lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx xi parti tal-lamp fl-ilma.
- Sostituzzjoni tal-bozza: Jekk il-bozza tinħaraq, aqla’ l-plagg tal-elettriku.amp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Ħażna: Jekk taħżen lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- Tiftaħx: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Issolvi l-problemi
If you encounter issues with your Jambo Liquid Motion Lamp, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lamp ma jixgħelx. | Bla dawl, bozza difettuża, jew konnessjoni maħlula. | Iċċekkja jekk il-lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | Tiżgura l-lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Speċifikazzjonijiet
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | KL-217 |
| Dimensjonijiet (D x W x H) | 11.4 ċm x 11.4 ċm x 39.4 ċm (madwar 4.5 x 4.5 x 15.5 pulzieri) |
| Għoli tad-dell | 16 pulzieri |
| Sors tal-Enerġija | Corded Elettriku |
| Voltage | 120 Volts |
| Wattage | 30 Watts |
| Tip ta' bozza | Inkandexxenti |
| Bażi tal-Bozza | E17 |
| Tip ta' Swiċċ | Jdur |
| Materjal Bażi | Aluminju |
| Materjal tad-dell | Ħġieġ |
| Tip Finish | Metalliku |
| Użu fuq ġewwa/barra | Ġewwa |
| Livell ta 'Reżistenza għall-Ilma | Mhux Waterproof |
| UPC | 850019692297 |
Garanzija u Appoġġ
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo websit għal informazzjoni ta' kuntatt.