HUDAMZKY KT 48V/52V 30A Brushless Ebike Controller Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of the HUDAMZKY KT 48V/52V 30A Brushless Ebike Controller. This controller is designed for electric bicycles, motorbikes, and conversion kits, supporting 1000W/1500W hub motors. It is compatible exclusively with KT brand LED and LCD displays.

Figure 1: Product Application Examples. The controller is suitable for various electric vehicle types.

2. Informazzjoni Importanti dwar is-Sigurtà

• Always ensure the power is off before installation or maintenance.
• This controller is only compatible with KT brand displays. Using non-KT displays may cause malfunction. Verify your display model is "KT" before connecting.
• Incorrect wiring can damage the controller or other components. Follow wiring diagrams carefully.
• Ensure all connections are secure and waterproof to prevent short circuits and corrosion.
• Tippruvax tiftaħ jew timmodifika l-kontrollur casing, as this may void the warranty and pose safety risks.
• If the controller overheats, it will automatically cut off current to protect the system. Allow it to cool down before resuming operation.

Figure 2: Verify KT Brand Mark on your controller for compatibility.

3. Prodott Aktarview u Karatteristiċi

The HUDAMZKY KT Brushless Controller is a robust component for electric bike conversion kits. It features a durable aluminum alloy casing with grooves for efficient heat dissipation, protecting internal components from thermal overload.

• Ditta: KT (KUTENG)
• Mosfets: 12 Mosfets for stable performance.
• Kurrent Massimu: 30±2A (for 30A version).
• Kurrent Rated: 15A.
• Vol ikklassifikattage: DC 36V/48V.
• Vol baxxtage Protezzjoni: DC30/40±0.5V.
• Dissipazzjoni tas-Sħana: Aluminum alloy shell with grooved design.
• Clear Connectors: Each connector is distinct for easy identification during installation.

Figure 3: HUDAMZKY KT Brushless Ebike Controller with wiring.

4. Speċifikazzjonijiet

Figure 4: Controller Dimensions and Electrical Parameters.

5. Setup u Installazzjoni

Before beginning installation, ensure your electric bike's power is completely disconnected. Identify each connector on the controller using the diagrams below. Each connector is uniquely shaped and color-coded to prevent incorrect connections.

5.1 Dijagramma tal-Wajers ta' Fuqview

Figure 5: Comprehensive Wiring Diagram.

5.2 Identifikazzjoni tal-Konnettur

The controller features various connectors for different components of your e-bike system. Refer to the following descriptions and images for proper identification:

• Battery Connector (PP30): Red and black wires for power input.
• Phase Lines: Three thick wires (blue, yellow, green) connecting to the motor's phase wires.
• Wajer tas-Sensor Hall: A multi-pin connector (DJ7061-2.8-21) for the motor's Hall sensors.
• PAS (Pedal Assist System) Connector (SM-3A): Typically brown, black, and yellow wires for pedal assist signal.
• Throttle Connector: Red, black, and white wires for throttle input.
• E-Brake Connectors (SM-2Y): Two separate connectors (red/blue and red/black) for electronic brake levers.
• Display Connector (SM-5A): Multi-pin connector for connecting the KT LED or LCD display. Includes RX, TX, Control, 36V/48V, and GND wires.

Figure 6: SM Plug Connection Types.

5.3 Proċedura ta' Konnessjoni

1. Connect the three thick Phase Lines (blue, yellow, green) from the controller to the corresponding phase wires of your hub motor.
2. Qabbad il- Hall Sensor Wire from the controller to the motor's Hall sensor cable.
3. Qabbad il- Konnettur tal-batterija to your e-bike battery. Ensure correct polarity (red to positive, black to negative).
4. Qabbad il- Konnettur tal-wiri to your KT brand LED or LCD display.
5. Qabbad il- Konnettur PAS to your Pedal Assist System sensor.
6. Qabbad il- Konnettur tat-throttle to your e-bike throttle.
7. Qabbad il- E-Brake Connectors to your electronic brake levers.
8. Once all connections are made, double-check for security and proper alignment before powering on the system.

Nota: The provided video demonstrates the connection process for the PAS system. While the video is a short preview, it visually aids in understanding the physical connection.

6. Istruzzjonijiet Operattivi

Once the controller is correctly installed and connected to a compatible KT display, you can power on your e-bike system. The display will provide information and allow you to adjust settings.

• Power On/Off: Use the power button on your KT display to turn the system on or off.
• Aġġustament tal-Livell PAS: Adjust the pedal assist levels via your KT display. If PAS is not working correctly, access the display's parameter settings and adjust them as needed. Refer to your specific KT display manual for detailed instructions on parameter adjustment.
• Kontroll tat-throttle: The throttle provides direct motor power. Use it carefully, especially when starting.
• Funzjoni tal-brejk: The e-brake levers will cut off motor power when activated, ensuring safe stopping.

7. Manutenzjoni

• Spezzjoni regolari: Iċċekkja perjodikament il-konnessjonijiet tal-wajers kollha għal laxkezza jew ħsara.
• Tindif: Keep the controller clean and free from dirt, dust, and moisture. Use a dry cloth for cleaning.
• Ġestjoni tas-Sħana: Ensure the controller is mounted in a location with adequate airflow to facilitate heat dissipation. Avoid covering it with insulating materials.
• Espożizzjoni għall-Ilma: While the controller is designed to be robust, avoid direct high-pressure water spray during cleaning.

8 Issolvi l-problemi

• Il-Kontrollur Mhux Qed Jixgħel:
  • Iċċekkja l-konnessjoni tal-batterija u l-livell tal-iċċarġjar.
  • Verify the display is correctly connected and powered.
  • Inspect all main power wires for damage.
• Il-Mutur Mhux Jirrispondi:
  • Ensure phase lines and Hall sensor wires are securely connected.
  • Check throttle and PAS connections.
  • Verify that the e-brake levers are not engaged, as they cut motor power.
• PAS Not Assisting:
  • Confirm the PAS sensor is correctly installed and connected.
  • Adjust PAS parameters in your KT display settings. If you do not have the display manual, contact customer support for assistance.
• Is-sħana żejda:
  • Naqqas it-tagħbija fuq il-mutur.
  • Ensure the controller has proper ventilation.
  • Check for any short circuits in the motor or wiring.
• Kwistjonijiet ta' Inkompatibbiltà:
  • This controller is only compatible with KT brand displays. If you are using a non-KT display, it will not function correctly.

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the seller's contact information or the product packaging. Ensure you retain your proof of purchase for any warranty claims. For specific display parameter adjustments, consult your KT display's instruction manual or contact the manufacturer.