Betopper 200W COB LED Stage Spotlight (Model LC002-H) Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe and effective operation of your Betopper 200W COB LED Stage Spotlight, Model LC002-H. Please read these instructions thoroughly before installation and use, and retain them for future reference.

Figure 1: Betopper 200W COB LED Stage Spotlight, Model LC002-H

2. Istruzzjonijiet tas-Sigurtà

• Sigurtà Elettrika: Żgura li l-provvista tal-enerġija taqbel mal-voltage requirements (AC 100-240V, 50/60Hz). Always disconnect power before cleaning or servicing.
• Ventilazzjoni: Do not block ventilation openings. Ensure adequate airflow around the fixture to prevent overheating.
• Temperatura: Operate the fixture within the specified temperature range (-20°C to 40°C).
• Immuntar: Immunta l-apparat b'mod sigur bl-użu tal-ħardwer xieraq. Kun żgur li l-wiċċ tal-immuntar jista' jsostni l-piż tal-apparat.
• Protezzjoni tal-għajnejn: Evita l-espożizzjoni diretta tal-għajnejn għas-sors tad-dawl, għax dan jista' jikkawża ħsara lill-għajnejn.
• Espożizzjoni għall-Ilma: This fixture is rated IP33. Protect it from water splashes and moisture. Do not use in wet environments.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• COB Par Light (x1)
• Manku (x2)
• Invita (x2)
• Manwal għall-Utent (x1)

4. Karatteristiċi tal-prodott

• 200W COB LED Technology: Utilizes Chip on Board (COB) technology for high-intensity, uniform light output with reduced power consumption.
• Warm & Cold White Output: Provides both 3200K (warm white) and 5600K (cold white) light sources.
• Indiċi Għoli tar-Rendiment tal-Kulur (CRI): RA>90 ensures faithful color reproduction, suitable for studios, churches, and theaters.
• Modi ta 'Kontroll: Supports DMX512, Master-Slave, and Strobe modes.
• Disinn Daisy-Chainable: Power and XLR cables can be daisy-chained for simplified setup.
• Kostruzzjoni robusta: Compact aluminum housing with excellent heat dissipation.
• Adjustable Barndoors: Allows for focused lighting angles (barndoors sold separately).

Figure 2: High CRI for accurate color reproduction

5. Setup

5.1 Immuntar

The fixture can be used as an uplight on the floor or hung on a truss as a downlight. Use the provided brackets and screws to secure the light. Ensure the mounting location is stable and can support the fixture's weight.

Figure 3: Mounting bracket for flexible positioning

5.2 Konnessjonijiet

The rear panel of the fixture features power input/output and DMX IN/OUT ports. These allow for daisy-chaining multiple units.

Figure 4: Rear panel with power and DMX connections

Konnessjoni tal-Enerġija:

Connect the power cable to the 'POWER IN' port. For multiple units, use the 'POWER OUT' port to daisy-chain power to the next fixture.

Konnessjoni DMX:

Connect a DMX cable from your DMX controller to the 'DMX IN' port. To control multiple fixtures, connect a DMX cable from the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.

6. Operazzjoni

6.1 Panel tal-Kontroll

The fixture features a digital display and control buttons (MENU, UP, DOWN, ENTER) on the rear panel for mode selection and parameter adjustment.

6.2 Modi Operattivi

The Betopper 200W COB LED Stage Spotlight supports various operating modes:

• Abjad sħun: Produces a warm, yellowish light (3200K).
• Abjad kiesaħ: Produces a bright, bluish-white light (5600K).
• Strobe Joħloq effett ta' dawl li jteptep.
• DMX512: Allows external control via a DMX controller for precise light adjustments.
• Kaptan-Skjav: One fixture acts as a master, controlling other connected slave fixtures.

Figure 5: Warm and Cold White light output

Figure 6: Combined Warm and Cold White light output

6.3 Dimostrazzjoni bil-Vidjo

Video 1: This video demonstrates the various light modes (warm white, cold white, strobe) and DMX control capabilities of the Betopper 200W COB LED Stage Spotlight. It shows how to connect multiple units via DMX and adjust settings using a DMX controller.

7. Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-apparat tiegħek.

• Tindif: Periodically clean the lens and exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Ventilazzjoni: Ensure the cooling fan and vents are free from dust and debris. The built-in cooling fan helps maintain optimal operating temperature.
• Spezzjoni tal-Cable: Regularly check power and DMX cables for any signs of damage.

Figure 7: Internal cooling fan for efficient heat dissipation

8 Issolvi l-problemi

• Ebda Qawwa: Check the power cable connection and ensure the power outlet is functional. Verify the fixture's power switch is on.
• Ebda Ħruġ tad-Dawl: Confirm the correct operating mode is selected. If using DMX, ensure the DMX address is set correctly and the controller is sending signals.
• Kwistjonijiet ta' Kontroll tad-DMX: Check DMX cable connections. Ensure DMX addresses are unique for each fixture and that the DMX chain is properly terminated if necessary.
• Is-sħana żejda: Ensure ventilation openings are not blocked. Reduce ambient temperature if possible.
• Storbju: The built-in cooling fan produces approximately 54dB of noise. If using in quiet environments (e.g., church, meeting room), confirm this noise level is acceptable.

9. Speċifikazzjonijiet

Figure 8: Detailed product dimensions and specifications

Figure 9: Beam angle and illumination flux diagram

10. Garanzija u Appoġġ

Betopper provides a 1-year manufacturer's warranty for this product. Additionally, lifetime professional technical support is available. For any inquiries or assistance, please contact Betopper customer service.