LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Model: 65636 | Brand: LEDVANCE
Informazzjoni Importanti dwar is-Sigurtà
- Użu fuq ġewwa biss: Dan il-prodott huwa ddisinjat għal użu fuq ġewwa f'postijiet niexfa. Tesponihx għall-ilma jew umdità għolja.
- Sigurtà Elettrika: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Istruzzjonijiet għat-tqattigħ: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Installazzjoni: Dejjem skonnettja l-enerġija qabel l-installazzjoni jew il-manutenzjoni.
- Sħana: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Tfal: Żomm il-prodott u l-komponenti tiegħu fejn ma jintlaħaqx mit-tfal.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Provvista tal-Enerġija
- (1) IR Remote Controller (with battery included)
- (20) Clips tal-Immuntar
Image: Main product image showing the light strips, remote, power adapter, and clips.
Setup u Installazzjoni
- Ipprepara l-wiċċ: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Konnessjoni tal-Komponenti: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Funzjonalità tat-Test: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Attiva l-Bogħod: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Operazzjoni
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Funzjonijiet tal-Kontroll mill-bogħod:
- ON/OFF: Power the light strips on or off.
- Għażla tal-Kulur: Choose from 16 static colors using the color buttons.
- Dimming: Adjust the brightness of the selected color or dynamic mode.
- Modi dinamiċi: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Manutenzjoni
- Tindif: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- It-tul tal-ħajja: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Sostituzzjoni tal-Batterija mill-Bogħod: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dwal ma jixegħlux. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| Il-kontroll mill-bogħod ma jirrispondix. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 65636 |
| Brand | LEDVANCE (Sylvania) |
| Kulur | RGB (16 colors) + White |
| Tul | 32ft (2 x 16.4ft strips) |
| Użu | Ġewwa Biss |
| Karatteristiċi Speċjali | Color Changing, Dimmable, Energy Efficient |
| Tip ta' Sors tad-Dawl | LED |
| Sors tal-Enerġija | Corded Elettriku |
| Tip ta' Kontrollur | Kontroll mill-bogħod IR |
| Voltage | 12 Volts |
| Wattage | 24 watt |
| Konnettività | Infra-aħmar |
| Materjal | Plastik |
| Piż tal-oġġett | 10.88 uqija |
| It-tul tal-ħajja | Sa 30,000 sigħat |
| Reżistenza għall-Ilma | Mhux Reżistenti għall-Ilma |
| UPC | 046135656361 |
Garanzija u Appoġġ
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garanzija ta' 1 snin mill-manifattur.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.
Tista 'wkoll iżżur il- Ħanut LEDVANCE fuq Amazon għal aktar prodotti u informazzjoni.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.