1. Introduzzjoni
Thank you for choosing the Generic HTC-1 Mini Digital Humidity Thermometer Hygrometer. This device is designed to provide accurate, real-time measurements of indoor temperature and humidity, along with a clock function. Its compact design allows for versatile placement, either on a desktop or mounted on a wall. Please read this manual carefully to ensure proper use and maintenance of your device.
2. Prodott Aktarview
2.1 Karatteristiċi ewlenin
- Preċiżjoni Għolja: Utilizes accurate dual-probe sensors for real-time temperature and humidity readings, updating every 10 seconds.
- Portable & Easy Reading: Features a desktop stand and wall-mount design with a large, bold digital LCD display for clear visibility.
- Firxa wiesgħa ta 'Użi: Suitable for monitoring environmental conditions in living rooms, baby rooms, greenhouses, basements, warehouses, wine cellars, cigar boxes, offices, and more.
- Preċiżjoni tal-Kejl tat-Temperatura: ±1°C (1.8°F).
- Eżattezza tal-Kejl tal-Umdità: ±2~3%.
2.2 Komponenti
The HTC-1 unit consists of a main display, control buttons, a battery compartment, and an integrated desktop stand/wall mount hole.

Figura 1: Quddiem view of the HTC-1 device, displaying temperature, humidity, and time.

Figura 2: Sploda view illustrating the internal components of the HTC-1 unit.
3. Setup
3.1 Installazzjoni tal-batterija
- Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-unità.
- Żerżaq l-għatu 'l isfel biex tiftaħ il-kompartiment.
- Insert one AAA battery (not included) according to the polarity indicators (+/-) inside the compartment.
- Agħlaq l-għatu tal-kompartiment tal-batterija billi tiżżerżaq 'il fuq sakemm tikklikkja f'postu.

Figura 3: Lura view of the HTC-1, highlighting the battery compartment and stand.
3.2 Tqegħid
- Stand tad-Desktop: Extend the integrated stand on the back of the unit to place it upright on any flat surface.
- Muntaġġ tal-ħajt: Use the hanging hole on the back of the unit to mount it on a wall using a nail or screw (not included).
4. Istruzzjonijiet Operattivi
4.1 Qari tal-Wiri
Upon battery installation, the device will automatically display the current temperature, humidity, and time. The temperature is typically shown in Celsius (°C) or Fahrenheit (°F), humidity as a percentage (%), and time in 12-hour or 24-hour format.
4.2 Unitajiet tat-Temperatura li Jibdlu (°C/°F)
Agħfas il- "MOD" button once to toggle between Celsius (°C) and Fahrenheit (°F) temperature units.
4.3 L-issettjar tal-Ħin u d-Data
- Agħfas u żomm il- "MOD" button for approximately 3 seconds to enter time setting mode. The hour digit will start flashing.
- Agħfas il- "ADJ" buttuna biex taġġusta s-siegħa.
- Agħfas "MOD" again to move to minute setting. Press "ADJ" biex taġġusta l-minuti.
- Kompli agħfas "MOD" biex tiċċirkola bejn is-settings tas-sena, ix-xahar, u l-jum, billi taġġusta kull wieħed bil- "ADJ" buttuna.
- Wara li tissettja l-jum, agħfas "MOD" darba oħra għall-aħħar darba biex toħroġ mill-modalità tas-settings.
4.4 MAX/MIN Temperature and Humidity Memory
Agħfas il- "MEMORY" button to display the maximum recorded temperature and humidity since the last reset. Press it again to display the minimum recorded values. Press a third time to return to current readings. To clear the MAX/MIN records, press and hold the "MEMORY" button for 3 seconds while MAX or MIN values are displayed.
5. Manutenzjoni
5.1 Tindif
To clean the device, simply wipe it with a clean, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
5.2 Sostituzzjoni tal-batterija
When the display becomes dim or the readings are inconsistent, it is time to replace the battery. Follow the battery installation steps in Section 3.1.
6 Issolvi l-problemi
- Ebda Wiri / Skrin Vojt:
- Check if the battery is installed correctly with the correct polarity.
- Ibdel b'batterija AAA ġdida.
- Qari mhux eżatt:
- Kun żgur li l-apparat jitqiegħed f'ambjent stabbli, 'il bogħod mix-xemx diretta, sorsi ta' sħana, jew kurrenti qawwija li jistgħu jaffettwaw il-qari.
- Ħalli l-apparat jistabbilizza ruħu għal mill-inqas 30 minuta wara s-setup inizjali jew ir-rilokazzjoni.
- Verify that the air vents on the device are not obstructed.
- Buttuni li ma jirrispondux:
- Neħħi u erġa' daħħal il-batterija biex twettaq soft reset.
- Kun żgur li l-batterija għandha qawwa suffiċjenti.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | HTC-1 |
| Tip ta 'Wiri | LCD |
| Sors tal-Enerġija | Imħaddem bil-batterija (1x AAA, mhux inklużi) |
| Ħin ta' Rispons | 10 sekonda |
| Preċiżjoni tat-Temperatura | ±1°C (1.8°F) |
| Eżattezza Umdità | ±2~3% |
| Materjal ta 'barra | Plastik |
| Karatteristika Speċjali | Preċiżjoni Għolja |

Figure 4: Dimensions of the HTC-1 device.





