1. Introduzzjoni
Thank you for choosing the Redkey Cordless Electric Mop M1. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new electric mop. Please read it thoroughly before first use and retain it for future reference.

Figure 1: Redkey Cordless Electric Mop M1 with included accessories.
2. Prodott Aktarview
2.1 Komponenti
- Mop Head Assembly
- Manku aġġustabbli
- Tank tal-Ilma (integrat)
- Microfiber Mop Pads (multiple sets)
- Self-Cleaning Station/Bucket
- Iċċarġjar Cable
- Tazza tal-kejl
- Battery (Lithium Ion, included)
2.2 Karatteristiċi ewlenin
- Dual Mop Heads: Rotate at high speeds for effective cleaning.
- One-Click Spray: Dispenses water or cleaning solution on demand.
- Fanal ta 'quddiem LED: Illuminates dark areas for thorough cleaning.
- Operazzjoni mingħajr Fili: Provides freedom of movement without power cords.
- Manku aġġustabbli: Customizable height for user comfort.
- Self-Cleaning Station: Cleans mop pads automatically.
- Użu versatili: Suitable for various sealed floor types including wood, tile, marble, and laminate.

Figure 2: Mop head with LED headlight and water spray function.
3. Setup
3.1 Unboxing u Armar
- Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
- Attach the adjustable handle to the mop head assembly. Ensure it clicks securely into place.
- Attach the microfiber mop pads to the bottom of the mop head. They typically attach via Velcro.
- Charge the mop fully before first use. Connect the charging cable to the charging port on the mop head and plug it into a power outlet. The indicator lights will show charging status.
Video 1: Unboxing and initial assembly of the Redkey M1 Cordless Electric Mop.
3.2 Mili tat-Tank tal-Ilma
- Locate the water inlet cover on the mop head.
- Open the cover and use the provided measuring cup to fill the tank with clean water or a suitable cleaning solution. Do not overfill.
- Securely close the water inlet cover.

Figure 3: Water inlet for filling the tank.
4. Istruzzjonijiet Operattivi
4.1 Power On/Off
Press the ON/OFF button on the handle to turn the mop on or off. The LED indicator lights will illuminate when the mop is active.

Figure 4: Power and spray buttons on the handle.
4.2 Using the Spray Function
Press the water spray button on the handle to dispense water or cleaning solution onto the floor. Control the amount and duration of spray as needed.
4.3 Mopping
Guide the mop across the floor. The dual rotating mop pads will clean the surface. The mop is designed to be self-driving, requiring minimal effort to push or pull.

Figure 5: The mop is suitable for hardwood, tile, marble, and laminate floors.
4.4 Aġġustament tal-Għoli tal-Manku
Press the aluminum tube button on the handle to adjust its length for comfortable use. The mop head can also rotate 90 degrees vertically and 160 degrees horizontally to reach under furniture.

Figure 6: Handle height adjustment and mop head flexibility.
5. Manutenzjoni
5.1 Tindif tal-Mopp Pads
The microfiber mop pads are detachable and machine washable. Remove them after each use and wash according to fabric care instructions. Ensure they are dry before reattaching.
5.2 Using the Self-Cleaning Station
Place the mop head into the self-cleaning station. Hold the water spray button for 2 seconds to activate the automatic cleaning cycle. The station separates clean and dirty water, ensuring your pads are rinsed with fresh water.

Figure 7: Automatic mop pad cleaning in the self-cleaning station.

Figure 8: Clean and dirty water separation within the cleaning station.
Video 2: Demonstration of the M121 Cordless Electric Mop's automatic cleaning tank.
5.3 Draining Dirty Water
After cleaning, locate the drain plug on the self-cleaning station. Open the plug to empty the dirty water. Rinse the station with clean water as needed.
6 Issolvi l-problemi
- Mop Not Turning On: Ensure the battery is fully charged. Check that the handle is securely attached to the mop head.
- Ebda Sprej tal-Ilma: Verify the water tank is filled. Check if the water inlet cover is properly sealed. Ensure the spray nozzle is not clogged.
- Mop Pads Not Spinning: Check for any obstructions around the mop pads. Ensure the mop is powered on.
- Tindif ineffettiv: Replace worn-out mop pads. Ensure pads are clean before use. Use an appropriate cleaning solution for your floor type.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Redkey |
| Numru tal-Mudell | Redkey M1 |
| Komponenti Inklużi | Batterija |
| Volum tal-Oġġett | 300 Millilitru |
| Karatteristika Speċjali | Ħfief |
| Għadd ta' Unitajiet | 2.0 Count (Mop Pads) |
| Dimensjonijiet tal-Prodott | 10 x 10 x 46 pulzieri |
| Piż tal-oġġett | 13.12 liri |
| Batteriji | 1 batterija tal-jone tal-litju meħtieġa (inkluża) |
| Istruzzjonijiet speċifiċi għall-użu | Tile, Floor, Furniture |
| Fattur tal-Formola | Waħħal |
| Istruzzjonijiet għall-kura | Hand Wash (Mop Pads) |
| Assemblaġġ meħtieġ | Iva |
| Numru ta' biċċiet | 8 |
| Tip ta 'batterija | Lithium-Ion |
| Kulur | Griż |
| Materjal | Plastic (Handle Material), Microfiber (Head Material) |
8. Garanzija u Appoġġ
The Redkey Cordless Electric Mop M1 comes with a manufacturer's warranty. For detailed warranty information, product support, or to purchase replacement parts, please refer to the contact information provided with your product packaging or visit the official Redkey websit.