ABB AD1NO-R-15m Modular Device Switch User Manual

1. Introduzzjoni

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Figura 1: Quddiem view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Istruzzjonijiet Importanti dwar is-Sigurtà

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• L-installazzjoni u l-manutenzjoni għandhom isiru minn persunal kwalifikat biss.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Kun żgur li l-wajers kollha jikkonformaw mal-kodiċijiet u r-regolamenti elettriċi lokali u nazzjonali.
• Tħaddimx l-apparat jekk jidher li hu bil-ħsara.
• Dan l-apparat huwa ddisinjat għall-użu fuq ġewwa f'ambjenti niexfa.

3. Prodott Aktarview

The AD1NO-R-15m is an analog time switch with the following key features:

• Dial Analog: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Jikkontrolla ċirkwit elettriku wieħed.
• Riżerva tal-Enerġija: Maintains timekeeping for a specified duration during power interruptions.
• Disinn Modulari: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Setup u Installazzjoni

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Skonnettjar tal-Enerġija: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltagtester.
2. Immuntar: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Wiring:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Restawr tal-Enerġija: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Istruzzjonijiet Operattivi

To set the time and program the switching schedule:

1. Issettja l-Ħin Kurrenti: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages.

6. Manutenzjoni

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Tindif: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Spezzjoni: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Kundizzjonijiet Ambjentali: Kun żgur li l-ambjent operattiv jibqa' fil-firxiet speċifikati tat-temperatura u l-umdità biex tevita l-ħsara.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7 Issolvi l-problemi

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Speċifikazzjonijiet Tekniċi

• Mudell: AD1NO-R-15m
• Numru tal-Parti: 2CSM222461R1000
• Manifattur: FIG
• Tip: Swiċċ tal-Ħin Analoġiku
• Switching Interval: minuti 15
• Kanali: 1 Normalment Miftuħ (LE)
• Riżerva tal-Enerġija: Iva
• Piż tal-oġġett: Madwar 2.82-il uqija (80 gramma)
• Dimensjonijiet tal-Prodott: Madwar 3.54 x 0.69 x 2.6 pulzieri (90 x 17.5 x 66 mm)
• Tip ta 'Immuntar: DIN Rail (Wall Mount)
• Komponenti Inklużi: Modular device switch
• Batteriji Meħtieġa: No (features internal power reserve)
• ASIN: B09BP4PFMF
• L-Ewwel Disponibbli: 21 ta’ Diċembru 2024

Nota: L-ispeċifikazzjonijiet huma soġġetti għal tibdil mingħajr avviż minn qabel.

9. Garanzija u Appoġġ

Informazzjoni dwar Garanzija

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Appoġġ għall-Klijent

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fl-imballaġġ tal-prodott tiegħek.

Uffiċjal tal-ABB Websit: www.abb.com