aigo AR12 Pro 120mm PWM ARGB Case Fans User Manual

Prodott Overview

The aigo AR12 Pro 120mm PWM ARGB Case Fans are designed to provide efficient cooling and customizable lighting for your computer system. This 3-pack includes fans with precise PWM control for automatic speed adjustment and Addressable RGB (ARGB) lighting that can synchronize with compatible motherboards.

Karatteristiċi ewlenin:

• High Performance PWM Fan: 120mm fan with automatic speed control (800-1600 RPM ±20%) for low noise and efficient cooling.
• Fluss tal-Arja Ottimizzat: 9-blade design engineered to optimize case airflow.
• Operazzjoni Siekta: Integrat damping pads absorb vibration for reduced noise levels.
• Dawl RGB Indirizzabbli: Customizable lighting effects controllable via a motherboard with a 5V 3-pin ARGB port.
• Tkessiħ effettiv: Tuned for high-airflow and large volume cooling, suitable for various case configurations.

Image: aigo AR12 Pro fans installed in a PC case, showcasing vibrant ARGB lighting and indicating precise PWM control. The image highlights the fan's ability to adjust speed between 800-1600 RPM for optimal performance.

Setup u Installazzjoni

Follow these steps to properly install your aigo AR12 Pro case fans into your computer system.

1. Ipprepara s-Sistema Tiegħek

• Kun żgur li l-kompjuter tiegħek huwa mitfi u skonnettjat mill-plakka tal-ħajt.
• Iftaħ il-kaxxa tal-kompjuter tiegħek biex taċċessa l-postijiet tal-immuntar tal-fann.
• Identify available 120mm fan mounting points in your case.

2. Mount the Fans

• Position each fan at your desired mounting location. Consider the airflow direction (see "Operating" section for details).
• Secure each fan using the provided screws. Do not overtighten.

Image: Diagram illustrating the wind direction of the aigo AR12 Pro fan. The front of the fan acts as the air inlet for cold air, and the back expels hot air.

3. Connect Power and ARGB Cables

Each aigo AR12 Pro fan has two cables: a 4-pin PWM cable for fan speed control and a 3-pin 5V ARGB cable for lighting control.

• Konnessjoni tal-PWM: Connect the 4-pin PWM cable from each fan to an available 4-pin fan header on your motherboard. These headers are typically labeled "CPU_FAN", "SYS_FAN", or "CHA_FAN".
• Konnessjoni ARGB: Connect the 3-pin 5V ARGB cable from each fan to an available 3-pin 5V ARGB header on your motherboard. These headers are often labeled "ADD_HEADER", "JRAINBOW", or "ARGB_HEADER". Tqabbadx ma' header RGB ta' 12V, għax dan se jagħmel ħsara lill-LEDs.
• If your motherboard does not have a 5V 3-pin ARGB header, an external ARGB controller (purchased separately) will be required to control the lighting effects.

Image: Diagram illustrating the connection of the aigo AR12 Pro fan's 5V 3-pin ARGB connector to a compatible motherboard header (labeled ADD GEN2), and the 4-pin PWM connector. It also shows an incorrect 12V RGB header connection.

Image: Close-up diagram of the 4-pin PWM and 5V 3-pin ARGB connectors, demonstrating the correct method for connecting them to ensure proper functionality.

Istruzzjonijiet Operattivi

Kontroll tal-Veloċità tal-Fann (PWM)

The aigo AR12 Pro fans utilize Pulse Width Modulation (PWM) technology for automatic speed control. Once connected to a 4-pin PWM header on your motherboard, the fan speed will be regulated by your system's temperature sensors or through software control provided by your motherboard manufacturer.

• Kontroll Awtomatiku: The motherboard will automatically adjust fan speed between 800-1600 RPM based on CPU or system temperature to maintain optimal cooling and noise levels.
• Kontroll manwali: Tipikament tista' taġġusta l-kurvi tal-fann u tissettja pro tal-veloċità appostafiles through your motherboard's BIOS/UEFI settings or dedicated software (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV).

Kontroll tad-Dawl ARGB

The Addressable RGB (ARGB) lighting of the AR12 Pro fans can be synchronized and controlled via your motherboard's ARGB software.

• Sinkronizzazzjoni tal-Motherboard: If connected to a 5V 3-pin ARGB header, use your motherboard's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.
• Kontrollur Estern: If using an external ARGB controller, refer to the controller's manual for instructions on how to change lighting modes.

Image: Multiple aigo AR12 Pro fans illuminating a PC interior with synchronized ARGB lighting, demonstrating aesthetic integration and vibrant color display.

Manutenzjoni

Regular maintenance helps ensure optimal performance and longevity of your aigo AR12 Pro fans.

• Tneħħija tat-Trab: Periodically clean the fan blades and frame to remove accumulated dust. Use compressed air or a soft brush. Ensure the computer is powered off and unplugged before cleaning.
• Spezzjoni: Occasionally inspect the fan cables for any signs of wear or damage. Ensure all connections remain secure.

Issolvi l-problemi

If you encounter issues with your aigo AR12 Pro fans, refer to the following common troubleshooting steps.

• Il-Fann Mhux Idur:
  • Check if the 4-pin PWM cable is securely connected to the motherboard fan header.
  • Ensure the motherboard fan header is enabled in BIOS/UEFI settings.
  • Test the fan on a different fan header if available.
• ARGB Lights Not Working:
  • Verify that the 3-pin 5V ARGB cable is correctly connected to a 5V ARGB header on the motherboard (not a 12V RGB header).
  • Confirm that your motherboard's ARGB software is installed and configured correctly.
  • If using an external controller, ensure it is powered and functioning.
  • Check for any loose connections in the ARGB daisy chain (if applicable).
• Storbju Eċċessiv:
  • Kun żgur li l-fann ikun immuntat sew u mhux qed jivvibra mal-kaxxa.
  • Iċċekkja għal xi kejbils jew ostruzzjonijiet li qed jolqtu x-xfafar tal-fann.
  • Adjust fan speed curves in your motherboard's BIOS/UEFI or software to reduce RPM at idle or low loads.
  • A slight whirring noise at certain RPMs can sometimes occur; ensure it's not indicative of a physical obstruction.
• Prestazzjoni Fqira tat-Tkessiħ:
  • Verify that the fans are oriented correctly for optimal airflow (intake vs. exhaust).
  • Clean any dust buildup on the fan blades or case filters.
  • Ensure fan speeds are set appropriately for your system's thermal demands.

Speċifikazzjonijiet

Garanzija u Appoġġ

For information regarding product warranty, please refer to the warranty policy provided by your retailer at the time of purchase or visit the official aigo website. For technical support or further assistance, please contact aigo customer service through their official channels.

Official aigo Websit: www.aigo.com (Nota: Dan huwa detentur tal-post URL. Please refer to the actual manufacturer's website for accurate support information.)